Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751404AbVKIPUZ (ORCPT ); Wed, 9 Nov 2005 10:20:25 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751406AbVKIPUZ (ORCPT ); Wed, 9 Nov 2005 10:20:25 -0500 Received: from pm-mx6.mgn.net ([195.46.220.208]:50821 "EHLO pm-mx6.mx.noos.fr") by vger.kernel.org with ESMTP id S1751404AbVKIPUY (ORCPT ); Wed, 9 Nov 2005 10:20:24 -0500 Date: Wed, 9 Nov 2005 16:20:10 +0100 From: Damien Wyart To: linux-kernel@vger.kernel.org Subject: CD Writer won't eject Message-ID: <20051109152010.GA20694@localhost.localdomain> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="5mCyUwZo2JvN/JJP" Content-Disposition: inline User-Agent: Mutt/1.5.11 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18669 Lines: 388 --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello, I've noticed since a few days that my CD writer refuses to eject, either by pushing the button or running the eject command. At first I did not notice anything in the logs. Rebooting made the door of the drive work again for a few hours, then it locked each time. Two days ago I noticed a message from the kernel which seems related. I include dmesg and related error message. For now I run 2.6.14rc5 because I am waiting for Namesys to release a clean reiser4 patch for 2.6.14. Does the problem ring a bell to someone ? I will try wil 2.6.14 ASAP. Maybe the drive itself is broken (it burns ok after rebooting, so it is not completely broken). Thanks in advance for any advice, -- Damien Wyart --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Linux version 2.6.14-rc5-git-23102005dw (root@brouette) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 SMP Sun Oct 23 20:33:45 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff74000 (usable) BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS) BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data) BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 262004 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32628 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000feb90 ACPI: RSDT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd1ca ACPI: FADT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd1fe ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc929b ACPI: MADT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd272 ACPI: BOOT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd2de ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/sdb2 ro vga=0x31B selinux=0 elevator=cfq video=vesafb:mtrr:2 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2992.973 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034508k/1048016k available (2401k kernel code, 12684k reserved, 713k data, 192k init, 130512k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5988.77 BogoMIPS (lpj=2994389) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000041d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5984.17 BogoMIPS (lpj=2992085) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000041d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 Total of 2 processors activated (11972.94 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x800-0x85f could not be reserved pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fd000000-feafffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fcf00000-fcffffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 Simple Boot Flag value 0x87 read from CMOS RAM was invalid Simple Boot Flag at 0x7a set to 0x1 Machine check exception polling timer started. highmem bounce pool size: 64 pages Loading Reiser4. See www.namesys.com for a description of Reiser4. Initializing Cryptographic API vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 131072k vesafb: mode is 1280x1024x32, linelength=5120, pages=0 vesafb: protected mode interface info at c000:f080 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 169 e100: eth0: e100_probe: addr 0xfcfff000, irq 169, MAC addr 00:0C:F1:B6:BA:54 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide1... hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive hdd: SAMSUNG CD-R/RW SW-252S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 16X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) libata version 1.12 loaded. ata_piix version 1.04 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 177 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 177 ata1: dev 0 cfg 49:2f00 82:74e9 83:7f63 84:4003 85:74e9 86:3e43 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 144531250 sectors: lba48 ata1(0): applying bridge limits ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix ata2: dev 0 cfg 49:2f00 82:74e9 83:7f63 84:4003 85:74e9 86:3e43 87:4003 88:207f ata2: dev 0 ATA, max UDMA/133, 144531250 sectors: lba48 ata2(0): applying bridge limits ata2: dev 0 configured for UDMA/100 scsi1 : ata_piix Vendor: ATA Model: WDC WD740GD-75FL Rev: 21.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD740GD-75FL Rev: 21.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 144531250 512-byte hdwr sectors (74000 MB) SCSI device sda: drive cache: write back SCSI device sda: 144531250 512-byte hdwr sectors (74000 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 144531250 512-byte hdwr sectors (74000 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 144531250 512-byte hdwr sectors (74000 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered input: AT Translated Set 2 keyboard on isa0060/serio0 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 192k freed logips2pp: Detected unknown logitech mouse model 63 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 185, io mem 0xffa80800 USB Universal Host Controller Interface driver v2.3 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000ff80 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000ff60 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller usb 2-1: new full speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000ff40 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000ff20 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 209 Adding 2048248k swap on /dev/sdb10. Priority:-1 extents:1 across:2048248k EXT3 FS on sdb2, internal journal ReiserFS: sdb5: found reiserfs format "3.6" with standard journal ReiserFS: sdb5: using ordered data mode ReiserFS: sdb5: journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb5: checking transaction log (sdb5) ReiserFS: sdb5: Using r5 hash to sort names ReiserFS: sdb6: found reiserfs format "3.6" with standard journal ReiserFS: sdb6: using ordered data mode ReiserFS: sdb6: journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb6: checking transaction log (sdb6) ReiserFS: sdb6: Using r5 hash to sort names JFS: nTxBlock = 8087, nTxLock = 64696 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled XFS mounting filesystem sdb9 Ending clean XFS mount for filesystem: sdb9 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="kern.log" hdd: irq timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdd: DMA disabled hdd: ATAPI reset timed-out, status=0x80 hdc: DMA disabled ide1: reset timed-out, status=0x90 hdd: status timeout: status=0x80 { Busy } ide: failed opcode was: unknown hdd: drive not ready for command hdd: ATAPI reset timed-out, status=0x80 ide1: reset timed-out, status=0x90 Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c015e14e *pde = 00000000 Oops: 0002 [#1] SMP Modules linked in: nls_iso8859_1 nls_cp437 vfat fat nvidia xfs jfs snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_ac97_bus snd_page_alloc snd_util_mem snd_hwdep uhci_hcd ehci_hcd snd usbcore soundcore parport_pc parport CPU: 0 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010286 (2.6.14-rc5-git-23102005dw) EIP is at create_empty_buffers+0x2c/0x8b eax: 00000000 ebx: c1358d80 ecx: 00000010 edx: 00000010 esi: 00000000 edi: 00000000 ebp: f7b4d56c esp: cd5e9c9c ds: 007b es: 007b ss: 0068 Process kded (pid: 2523, threadinfo=cd5e8000 task=f78caa50) Stack: c1358d80 00010000 00000001 c1358d80 c1358d80 f7b4d618 c015ee12 c1358d80 00010000 00000000 cd5e9d18 cd5e9cd4 f7b4d61c 00000000 00000001 c0241d4c c18f0880 00000020 00010000 c0242026 f7b4d61c 00000008 da40b5b8 00000000 Call Trace: [] block_read_full_page+0x336/0x358 [] radix_tree_node_alloc+0x1c/0x63 [] radix_tree_insert+0x10c/0x148 [] add_to_page_cache+0xa2/0xb3 [] read_pages+0xda/0x12a [] blkdev_get_block+0x0/0x59 [] __do_page_cache_readahead+0x170/0x175 [] blockable_page_cache_readahead+0x63/0xc8 [] page_cache_readahead+0xf0/0x18a [] do_generic_mapping_read+0x4e6/0x66f [] __generic_file_aio_read+0x177/0x235 [] file_read_actor+0x0/0xed [] generic_file_read+0xc3/0xe1 [] __dentry_open+0x17e/0x1ff [] filp_open+0x81/0x88 [] autoremove_wake_function+0x0/0x4b [] vfs_read+0x9d/0x177 [] sys_read+0x4b/0x74 [] sysenter_past_esp+0x54/0x75 Code: 56 53 83 ec 0c 8b 5c 24 1c 8b 74 24 24 c7 44 24 08 01 00 00 00 8b 44 24 20 89 44 24 04 89 1c 24 e8 5f f5 ff ff 89 c7 eb 02 89 d0 <09> 30 8b 50 04 85 d2 75 f5 89 78 04 8b 43 10 83 c0 44 e8 33 8c --5mCyUwZo2JvN/JJP-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/