Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 8 May 2019 22:54:18 +0800
From:   Changbin Du <changbin.du@gmail.com>
To:     Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc:     Changbin Du <changbin.du@gmail.com>, corbet@lwn.net,
        tglx@linutronix.de, mingo@redhat.com, bp@alien8.de, x86@kernel.org,
        linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 02/27] Documentation: x86: convert boot.txt to reST
Message-ID: <20190508145415.xsxkq7xdjwhs7mgm@mail.google.com>
References: <20190506170923.7117-1-changbin.du@gmail.com>
 <20190506170923.7117-3-changbin.du@gmail.com>
 <20190506145258.2fc691b2@coco.lan>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20190506145258.2fc691b2@coco.lan>
User-Agent: NeoMutt/20180716
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon, May 06, 2019 at 02:52:58PM -0300, Mauro Carvalho Chehab wrote:
> Em Tue,  7 May 2019 01:08:58 +0800
> Changbin Du <changbin.du@gmail.com> escreveu:
> 
> > This converts the plain text documentation to reStructuredText format and
> > add it to Sphinx TOC tree. No essential content change.
> > 
> > Signed-off-by: Changbin Du <changbin.du@gmail.com>
> > Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> > ---
> >  Documentation/x86/{boot.txt => boot.rst} | 530 ++++++++++++++---------
> >  Documentation/x86/index.rst              |   2 +
> >  2 files changed, 329 insertions(+), 203 deletions(-)
> >  rename Documentation/x86/{boot.txt => boot.rst} (73%)
> > 
> > diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.rst
> > similarity index 73%
> > rename from Documentation/x86/boot.txt
> > rename to Documentation/x86/boot.rst
> > index 223e484a1304..5f20de0ced23 100644
> > --- a/Documentation/x86/boot.txt
> > +++ b/Documentation/x86/boot.rst
> > @@ -1,5 +1,8 @@
> > -		     THE LINUX/x86 BOOT PROTOCOL
> > -		     ---------------------------
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +===========================
> > +The Linux/x86 Boot Protocol
> > +===========================
> >  
> >  On the x86 platform, the Linux kernel uses a rather complicated boot
> >  convention.  This has evolved partially due to historical aspects, as
> > @@ -10,88 +13,91 @@ real-mode DOS as a mainstream operating system.
> >  
> >  Currently, the following versions of the Linux/x86 boot protocol exist.
> >  
> > -Old kernels:	zImage/Image support only.  Some very early kernels
> > +=============	============================================================
> > +Old kernels	zImage/Image support only.  Some very early kernels
> >  		may not even support a command line.
> >  
> > -Protocol 2.00:	(Kernel 1.3.73) Added bzImage and initrd support, as
> > +Protocol 2.00	(Kernel 1.3.73) Added bzImage and initrd support, as
> >  		well as a formalized way to communicate between the
> >  		boot loader and the kernel.  setup.S made relocatable,
> >  		although the traditional setup area still assumed
> >  		writable.
> >  
> > -Protocol 2.01:	(Kernel 1.3.76) Added a heap overrun warning.
> > +Protocol 2.01	(Kernel 1.3.76) Added a heap overrun warning.
> >  
> > -Protocol 2.02:	(Kernel 2.4.0-test3-pre3) New command line protocol.
> > +Protocol 2.02	(Kernel 2.4.0-test3-pre3) New command line protocol.
> >  		Lower the conventional memory ceiling.	No overwrite
> >  		of the traditional setup area, thus making booting
> >  		safe for systems which use the EBDA from SMM or 32-bit
> >  		BIOS entry points.  zImage deprecated but still
> >  		supported.
> >  
> > -Protocol 2.03:	(Kernel 2.4.18-pre1) Explicitly makes the highest possible
> > +Protocol 2.03	(Kernel 2.4.18-pre1) Explicitly makes the highest possible
> >  		initrd address available to the bootloader.
> >  
> > -Protocol 2.04:	(Kernel 2.6.14) Extend the syssize field to four bytes.
> > +Protocol 2.04	(Kernel 2.6.14) Extend the syssize field to four bytes.
> >  
> > -Protocol 2.05:	(Kernel 2.6.20) Make protected mode kernel relocatable.
> > +Protocol 2.05	(Kernel 2.6.20) Make protected mode kernel relocatable.
> >  		Introduce relocatable_kernel and kernel_alignment fields.
> >  
> > -Protocol 2.06:	(Kernel 2.6.22) Added a field that contains the size of
> > +Protocol 2.06	(Kernel 2.6.22) Added a field that contains the size of
> >  		the boot command line.
> >  
> > -Protocol 2.07:	(Kernel 2.6.24) Added paravirtualised boot protocol.
> > +Protocol 2.07	(Kernel 2.6.24) Added paravirtualised boot protocol.
> >  		Introduced hardware_subarch and hardware_subarch_data
> >  		and KEEP_SEGMENTS flag in load_flags.
> >  
> > -Protocol 2.08:	(Kernel 2.6.26) Added crc32 checksum and ELF format
> > +Protocol 2.08	(Kernel 2.6.26) Added crc32 checksum and ELF format
> >  		payload. Introduced payload_offset and payload_length
> >  		fields to aid in locating the payload.
> >  
> > -Protocol 2.09:	(Kernel 2.6.26) Added a field of 64-bit physical
> > +Protocol 2.09	(Kernel 2.6.26) Added a field of 64-bit physical
> >  		pointer to single linked list of struct	setup_data.
> >  
> > -Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
> > +Protocol 2.10	(Kernel 2.6.31) Added a protocol for relaxed alignment
> >  		beyond the kernel_alignment added, new init_size and
> >  		pref_address fields.  Added extended boot loader IDs.
> >  
> > -Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
> > +Protocol 2.11	(Kernel 3.6) Added a field for offset of EFI handover
> >  		protocol entry point.
> >  
> > -Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
> > +Protocol 2.12	(Kernel 3.8) Added the xloadflags field and extension fields
> >  		to struct boot_params for loading bzImage and ramdisk
> >  		above 4G in 64bit.
> >  
> > -Protocol 2.13:	(Kernel 3.14) Support 32- and 64-bit flags being set in
> > +Protocol 2.13	(Kernel 3.14) Support 32- and 64-bit flags being set in
> >  		xloadflags to support booting a 64-bit kernel from 32-bit
> >  		EFI
> > +=============	============================================================
> >  
> > -**** MEMORY LAYOUT
> >  
> > -The traditional memory map for the kernel loader, used for Image or
> > -zImage kernels, typically looks like:
> > -
> > -	|			 |
> > -0A0000	+------------------------+
> > -	|  Reserved for BIOS	 |	Do not use.  Reserved for BIOS EBDA.
> > -09A000	+------------------------+
> > -	|  Command line		 |
> > -	|  Stack/heap		 |	For use by the kernel real-mode code.
> > -098000	+------------------------+	
> > -	|  Kernel setup		 |	The kernel real-mode code.
> > -090200	+------------------------+
> > -	|  Kernel boot sector	 |	The kernel legacy boot sector.
> > -090000	+------------------------+
> > -	|  Protected-mode kernel |	The bulk of the kernel image.
> > -010000	+------------------------+
> > -	|  Boot loader		 |	<- Boot sector entry point 0000:7C00
> > -001000	+------------------------+
> > -	|  Reserved for MBR/BIOS |
> > -000800	+------------------------+
> > -	|  Typically used by MBR |
> > -000600	+------------------------+ 
> > -	|  BIOS use only	 |
> > -000000	+------------------------+
> > +Memory Layout
> > +=============
> >  
> > +The traditional memory map for the kernel loader, used for Image or
> > +zImage kernels, typically looks like::
> > +
> > +		|			 |
> > +	0A0000	+------------------------+
> > +		|  Reserved for BIOS	 |	Do not use.  Reserved for BIOS EBDA.
> > +	09A000	+------------------------+
> > +		|  Command line		 |
> > +		|  Stack/heap		 |	For use by the kernel real-mode code.
> > +	098000	+------------------------+
> > +		|  Kernel setup		 |	The kernel real-mode code.
> > +	090200	+------------------------+
> > +		|  Kernel boot sector	 |	The kernel legacy boot sector.
> > +	090000	+------------------------+
> > +		|  Protected-mode kernel |	The bulk of the kernel image.
> > +	010000	+------------------------+
> > +		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
> > +	001000	+------------------------+
> > +		|  Reserved for MBR/BIOS |
> > +	000800	+------------------------+
> > +		|  Typically used by MBR |
> > +	000600	+------------------------+
> > +		|  BIOS use only	 |
> > +	000000	+------------------------+
> >  
> >  When using bzImage, the protected-mode kernel was relocated to
> >  0x100000 ("high memory"), and the kernel real-mode block (boot sector,
> > @@ -116,36 +122,36 @@ zImage or old bzImage kernels, which need data written into the
> >  above the 0x9A000 point; too many BIOSes will break above that point.
> >  
> >  For a modern bzImage kernel with boot protocol version >= 2.02, a
> > -memory layout like the following is suggested:
> > -
> > -	~                        ~
> > -        |  Protected-mode kernel |
> > -100000  +------------------------+
> > -	|  I/O memory hole	 |
> > -0A0000	+------------------------+
> > -	|  Reserved for BIOS	 |	Leave as much as possible unused
> > -	~                        ~
> > -	|  Command line		 |	(Can also be below the X+10000 mark)
> > -X+10000	+------------------------+
> > -	|  Stack/heap		 |	For use by the kernel real-mode code.
> > -X+08000	+------------------------+	
> > -	|  Kernel setup		 |	The kernel real-mode code.
> > -	|  Kernel boot sector	 |	The kernel legacy boot sector.
> > -X       +------------------------+
> > -	|  Boot loader		 |	<- Boot sector entry point 0000:7C00
> > -001000	+------------------------+
> > -	|  Reserved for MBR/BIOS |
> > -000800	+------------------------+
> > -	|  Typically used by MBR |
> > -000600	+------------------------+ 
> > -	|  BIOS use only	 |
> > -000000	+------------------------+
> > -
> > -... where the address X is as low as the design of the boot loader
> > -permits.
> > -
> > -
> > -**** THE REAL-MODE KERNEL HEADER
> > +memory layout like the following is suggested::
> > +
> > +		~                        ~
> > +		|  Protected-mode kernel |
> > +	100000  +------------------------+
> > +		|  I/O memory hole	 |
> > +	0A0000	+------------------------+
> > +		|  Reserved for BIOS	 |	Leave as much as possible unused
> > +		~                        ~
> > +		|  Command line		 |	(Can also be below the X+10000 mark)
> > +	X+10000	+------------------------+
> > +		|  Stack/heap		 |	For use by the kernel real-mode code.
> > +	X+08000	+------------------------+
> > +		|  Kernel setup		 |	The kernel real-mode code.
> > +		|  Kernel boot sector	 |	The kernel legacy boot sector.
> > +	X       +------------------------+
> > +		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
> > +	001000	+------------------------+
> > +		|  Reserved for MBR/BIOS |
> > +	000800	+------------------------+
> > +		|  Typically used by MBR |
> > +	000600	+------------------------+
> > +		|  BIOS use only	 |
> > +	000000	+------------------------+
> > +
> > +  ... where the address X is as low as the design of the boot loader permits.
> > +
> > +
> > +The Real-Mode Kernel Header
> > +===========================
> >  
> >  In the following text, and anywhere in the kernel boot sequence, "a
> >  sector" refers to 512 bytes.  It is independent of the actual sector
> > @@ -159,61 +165,63 @@ sectors (1K) and then examine the bootup sector size.
> >  
> >  The header looks like:
> >  
> > -Offset	Proto	Name		Meaning
> > -/Size
> > -
> > -01F1/1	ALL(1	setup_sects	The size of the setup in sectors
> > -01F2/2	ALL	root_flags	If set, the root is mounted readonly
> > -01F4/4	2.04+(2	syssize		The size of the 32-bit code in 16-byte paras
> > -01F8/2	ALL	ram_size	DO NOT USE - for bootsect.S use only
> > -01FA/2	ALL	vid_mode	Video mode control
> > -01FC/2	ALL	root_dev	Default root device number
> > -01FE/2	ALL	boot_flag	0xAA55 magic number
> > -0200/2	2.00+	jump		Jump instruction
> > -0202/4	2.00+	header		Magic signature "HdrS"
> > -0206/2	2.00+	version		Boot protocol version supported
> > -0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
> > -020C/2	2.00+	start_sys_seg	The load-low segment (0x1000) (obsolete)
> > -020E/2	2.00+	kernel_version	Pointer to kernel version string
> > -0210/1	2.00+	type_of_loader	Boot loader identifier
> > -0211/1	2.00+	loadflags	Boot protocol option flags
> > -0212/2	2.00+	setup_move_size	Move to high memory size (used with hooks)
> > -0214/4	2.00+	code32_start	Boot loader hook (see below)
> > -0218/4	2.00+	ramdisk_image	initrd load address (set by boot loader)
> > -021C/4	2.00+	ramdisk_size	initrd size (set by boot loader)
> > -0220/4	2.00+	bootsect_kludge	DO NOT USE - for bootsect.S use only
> > -0224/2	2.01+	heap_end_ptr	Free memory after setup end
> > -0226/1	2.02+(3 ext_loader_ver	Extended boot loader version
> > -0227/1	2.02+(3	ext_loader_type	Extended boot loader ID
> > -0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
> > -022C/4	2.03+	initrd_addr_max	Highest legal initrd address
> > -0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
> > -0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
> > -0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
> > -0236/2	2.12+	xloadflags	Boot protocol option flags
> > -0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
> > -023C/4	2.07+	hardware_subarch Hardware subarchitecture
> > -0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
> > -0248/4	2.08+	payload_offset	Offset of kernel payload
> > -024C/4	2.08+	payload_length	Length of kernel payload
> > -0250/8	2.09+	setup_data	64-bit physical pointer to linked list
> > -				of struct setup_data
> > -0258/8	2.10+	pref_address	Preferred loading address
> > -0260/4	2.10+	init_size	Linear memory required during initialization
> > -0264/4	2.11+	handover_offset	Offset of handover entry point
> > -
> > -(1) For backwards compatibility, if the setup_sects field contains 0, the
> > -    real value is 4.
> > -
> > -(2) For boot protocol prior to 2.04, the upper two bytes of the syssize
> > -    field are unusable, which means the size of a bzImage kernel
> > -    cannot be determined.
> > -
> > -(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
> > +===========	========	=====================	============================================
> > +Offset/Size	Proto		Name			Meaning
> > +===========	========	=====================	============================================
> > +01F1/1		ALL(1)		setup_sects		The size of the setup in sectors
> > +01F2/2		ALL		root_flags		If set, the root is mounted readonly
> > +01F4/4		2.04+(2)	syssize			The size of the 32-bit code in 16-byte paras
> > +01F8/2		ALL		ram_size		DO NOT USE - for bootsect.S use only
> > +01FA/2		ALL		vid_mode		Video mode control
> > +01FC/2		ALL		root_dev		Default root device number
> > +01FE/2		ALL		boot_flag		0xAA55 magic number
> > +0200/2		2.00+		jump			Jump instruction
> > +0202/4		2.00+		header			Magic signature "HdrS"
> > +0206/2		2.00+		version			Boot protocol version supported
> > +0208/4		2.00+		realmode_swtch		Boot loader hook (see below)
> > +020C/2		2.00+		start_sys_seg		The load-low segment (0x1000) (obsolete)
> > +020E/2		2.00+		kernel_version		Pointer to kernel version string
> > +0210/1		2.00+		type_of_loader		Boot loader identifier
> > +0211/1		2.00+		loadflags		Boot protocol option flags
> > +0212/2		2.00+		setup_move_size		Move to high memory size (used with hooks)
> > +0214/4		2.00+		code32_start		Boot loader hook (see below)
> > +0218/4		2.00+		ramdisk_image		initrd load address (set by boot loader)
> > +021C/4		2.00+		ramdisk_size		initrd size (set by boot loader)
> > +0220/4		2.00+		bootsect_kludge		DO NOT USE - for bootsect.S use only
> > +0224/2		2.01+		heap_end_ptr		Free memory after setup end
> > +0226/1		2.02+(3)	ext_loader_ver		Extended boot loader version
> > +0227/1		2.02+(3)	ext_loader_type		Extended boot loader ID
> > +0228/4		2.02+		cmd_line_ptr		32-bit pointer to the kernel command line
> > +022C/4		2.03+		initrd_addr_max		Highest legal initrd address
> > +0230/4		2.05+		kernel_alignment	Physical addr alignment required for kernel
> > +0234/1		2.05+		relocatable_kernel	Whether kernel is relocatable or not
> > +0235/1		2.10+		min_alignment		Minimum alignment, as a power of two
> > +0236/2		2.12+		xloadflags		Boot protocol option flags
> > +0238/4		2.06+		cmdline_size		Maximum size of the kernel command line
> > +023C/4		2.07+		hardware_subarch	Hardware subarchitecture
> > +0240/8		2.07+		hardware_subarch_data	Subarchitecture-specific data
> > +0248/4		2.08+		payload_offset		Offset of kernel payload
> > +024C/4		2.08+		payload_length		Length of kernel payload
> > +0250/8		2.09+		setup_data		64-bit physical pointer to linked list
> > +							of struct setup_data
> > +0258/8		2.10+		pref_address		Preferred loading address
> > +0260/4		2.10+		init_size		Linear memory required during initialization
> > +0264/4		2.11+		handover_offset		Offset of handover entry point
> > +===========	========	=====================	============================================
> > +
> > +.. note::
> > +  (1) For backwards compatibility, if the setup_sects field contains 0, the
> > +      real value is 4.
> > +
> > +  (2) For boot protocol prior to 2.04, the upper two bytes of the syssize
> > +      field are unusable, which means the size of a bzImage kernel
> > +      cannot be determined.
> > +
> > +  (3) Ignored, but safe to set, for boot protocols 2.02-2.09.
> >  
> >  If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
> >  the boot protocol version is "old".  Loading an old kernel, the
> > -following parameters should be assumed:
> > +following parameters should be assumed::
> >  
> >  	Image type = zImage
> >  	initrd not supported
> > @@ -225,7 +233,8 @@ setting fields in the header, you must make sure only to set fields
> >  supported by the protocol version in use.
> >  
> >  
> > -**** DETAILS OF HEADER FIELDS
> > +Details of Harder Fileds
> > +========================
> >  
> >  For each field, some are information from the kernel to the bootloader
> >  ("read"), some are expected to be filled out by the bootloader
> > @@ -239,106 +248,132 @@ boot loaders can ignore those fields.
> >  
> >  The byte order of all fields is littleendian (this is x86, after all.)
> >  
> > +============	===========
> >  Field name:	setup_sects
> >  Type:		read
> >  Offset/size:	0x1f1/1
> >  Protocol:	ALL
> > +============	===========
> >  
> >    The size of the setup code in 512-byte sectors.  If this field is
> >    0, the real value is 4.  The real-mode code consists of the boot
> >    sector (always one 512-byte sector) plus the setup code.
> >  
> > -Field name:	 root_flags
> > -Type:		 modify (optional)
> > -Offset/size:	 0x1f2/2
> > -Protocol:	 ALL
> > +============	=================
> > +Field name:	root_flags
> > +Type:		modify (optional)
> > +Offset/size:	0x1f2/2
> > +Protocol:	ALL
> > +============	=================
> >  
> >    If this field is nonzero, the root defaults to readonly.  The use of
> >    this field is deprecated; use the "ro" or "rw" options on the
> >    command line instead.
> >  
> > +============	===============================================
> >  Field name:	syssize
> >  Type:		read
> >  Offset/size:	0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL)
> >  Protocol:	2.04+
> > +============	===============================================
> >  
> >    The size of the protected-mode code in units of 16-byte paragraphs.
> >    For protocol versions older than 2.04 this field is only two bytes
> >    wide, and therefore cannot be trusted for the size of a kernel if
> >    the LOAD_HIGH flag is set.
> >  
> > +============	===============
> >  Field name:	ram_size
> >  Type:		kernel internal
> >  Offset/size:	0x1f8/2
> >  Protocol:	ALL
> > +============	===============
> >  
> >    This field is obsolete.
> >  
> > +============	===================
> >  Field name:	vid_mode
> >  Type:		modify (obligatory)
> >  Offset/size:	0x1fa/2
> > +============	===================
> >  
> >    Please see the section on SPECIAL COMMAND LINE OPTIONS.
> >  
> > +============	=================
> >  Field name:	root_dev
> >  Type:		modify (optional)
> >  Offset/size:	0x1fc/2
> >  Protocol:	ALL
> > +============	=================
> >  
> >    The default root device device number.  The use of this field is
> >    deprecated, use the "root=" option on the command line instead.
> >  
> > +============	=========
> >  Field name:	boot_flag
> >  Type:		read
> >  Offset/size:	0x1fe/2
> >  Protocol:	ALL
> > +============	=========
> >  
> >    Contains 0xAA55.  This is the closest thing old Linux kernels have
> >    to a magic number.
> >  
> > +============	=======
> >  Field name:	jump
> >  Type:		read
> >  Offset/size:	0x200/2
> >  Protocol:	2.00+
> > +============	=======
> >  
> >    Contains an x86 jump instruction, 0xEB followed by a signed offset
> >    relative to byte 0x202.  This can be used to determine the size of
> >    the header.
> >  
> > +============	=======
> >  Field name:	header
> >  Type:		read
> >  Offset/size:	0x202/4
> >  Protocol:	2.00+
> > +============	=======
> >  
> >    Contains the magic number "HdrS" (0x53726448).
> >  
> > +============	=======
> >  Field name:	version
> >  Type:		read
> >  Offset/size:	0x206/2
> >  Protocol:	2.00+
> > +============	=======
> >  
> >    Contains the boot protocol version, in (major << 8)+minor format,
> >    e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
> >    10.17.
> >  
> > +============	=================
> >  Field name:	realmode_swtch
> >  Type:		modify (optional)
> >  Offset/size:	0x208/4
> >  Protocol:	2.00+
> > +============	=================
> >  
> >    Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
> >  
> > +============	=============
> >  Field name:	start_sys_seg
> >  Type:		read
> >  Offset/size:	0x20c/2
> >  Protocol:	2.00+
> > +============	=============
> >  
> >    The load low segment (0x1000).  Obsolete.
> >  
> > +============	==============
> >  Field name:	kernel_version
> >  Type:		read
> >  Offset/size:	0x20e/2
> >  Protocol:	2.00+
> > +============	==============
> >  
> >    If set to a nonzero value, contains a pointer to a NUL-terminated
> >    human-readable kernel version number string, less 0x200.  This can
> > @@ -348,17 +383,21 @@ Protocol:	2.00+
> >    For example, if this value is set to 0x1c00, the kernel version
> >    number string can be found at offset 0x1e00 in the kernel file.
> >    This is a valid value if and only if the "setup_sects" field
> > -  contains the value 15 or higher, as:
> > +  contains the value 15 or higher, as::
> >  
> >  	0x1c00  < 15*0x200 (= 0x1e00) but
> >  	0x1c00 >= 14*0x200 (= 0x1c00)
> >  
> > -	0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15.
> > +	0x1c00 >> 9 = 14
> > +
> > +  So the minimum value for setup_secs is 15.
> 
> IMO, this belongs to the literal block.
> 
ok.

> >  
> > +============	==================
> >  Field name:	type_of_loader
> >  Type:		write (obligatory)
> >  Offset/size:	0x210/1
> >  Protocol:	2.00+
> > +============	==================
> >  
> >    If your boot loader has an assigned id (see table below), enter
> >    0xTV here, where T is an identifier for the boot loader and V is
> > @@ -369,17 +408,20 @@ Protocol:	2.00+
> >    Similarly, the ext_loader_ver field can be used to provide more than
> >    four bits for the bootloader version.
> >  
> > -  For example, for T = 0x15, V = 0x234, write:
> > +  For example, for T = 0x15, V = 0x234, write::
> >  
> > -  type_of_loader  <- 0xE4
> > -  ext_loader_type <- 0x05
> > -  ext_loader_ver  <- 0x23
> > +	type_of_loader  <- 0xE4
> > +	ext_loader_type <- 0x05
> > +	ext_loader_ver  <- 0x23
> >  
> >    Assigned boot loader ids (hexadecimal):
> >  
> > -	0  LILO			(0x00 reserved for pre-2.00 bootloader)
> > +	== ==============================
> 
> The table markup line here is too short.
> 
> > +	0  LILO
> > +	   (0x00 reserved for pre-2.00 bootloader)
> >  	1  Loadlin
> > -	2  bootsect-loader	(0x20, all other values reserved)
> > +	2  bootsect-loader
> > +	   (0x20, all other values reserved)
> >  	3  Syslinux
> >  	4  Etherboot/gPXE/iPXE
> >  	5  ELILO
> > @@ -390,55 +432,70 @@ Protocol:	2.00+
> >  	B  Qemu
> >  	C  Arcturus Networks uCbootloader
> >  	D  kexec-tools
> > -	E  Extended		(see ext_loader_type)
> > -	F  Special		(0xFF = undefined)
> > -       10  Reserved
> > -       11  Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
> > -       12  OVMF UEFI virtualization stack
> > +	E  Extended (see ext_loader_type)
> > +	F  Special (0xFF = undefined)
> > +	10 Reserved
> > +	11 Minimal Linux Bootloader
> > +	   <http://sebastian-plotz.blogspot.de>
> > +	12 OVMF UEFI virtualization stack
> > +	== ==============================
> 
> Same here: extending the line above will require extending it here too.
> 
Fixed. Thanks.

> With the above changes:
> 
> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> 
> 
> >  
> > -  Please contact <hpa@zytor.com> if you need a bootloader ID
> > -  value assigned.
> > +  Please contact <hpa@zytor.com> if you need a bootloader ID value assigned.
> >  
> > +============	===================
> >  Field name:	loadflags
> >  Type:		modify (obligatory)
> >  Offset/size:	0x211/1
> >  Protocol:	2.00+
> > +============	===================
> >  
> >    This field is a bitmask.
> >  
> >    Bit 0 (read):	LOADED_HIGH
> > +
> >  	- If 0, the protected-mode code is loaded at 0x10000.
> >  	- If 1, the protected-mode code is loaded at 0x100000.
> >  
> >    Bit 1 (kernel internal): KASLR_FLAG
> > +
> >  	- Used internally by the compressed kernel to communicate
> >  	  KASLR status to kernel proper.
> > -	  If 1, KASLR enabled.
> > -	  If 0, KASLR disabled.
> > +
> > +	    - If 1, KASLR enabled.
> > +	    - If 0, KASLR disabled.
> >  
> >    Bit 5 (write): QUIET_FLAG
> > +
> >  	- If 0, print early messages.
> >  	- If 1, suppress early messages.
> > +
> >  		This requests to the kernel (decompressor and early
> >  		kernel) to not write early messages that require
> >  		accessing the display hardware directly.
> >  
> >    Bit 6 (write): KEEP_SEGMENTS
> > +
> >  	Protocol: 2.07+
> > +
> >  	- If 0, reload the segment registers in the 32bit entry point.
> >  	- If 1, do not reload the segment registers in the 32bit entry point.
> > +
> >  		Assume that %cs %ds %ss %es are all set to flat segments with
> >  		a base of 0 (or the equivalent for their environment).
> >  
> >    Bit 7 (write): CAN_USE_HEAP
> > +
> >  	Set this bit to 1 to indicate that the value entered in the
> >  	heap_end_ptr is valid.  If this field is clear, some setup code
> >  	functionality will be disabled.
> >  
> > +
> > +============	===================
> >  Field name:	setup_move_size
> >  Type:		modify (obligatory)
> >  Offset/size:	0x212/2
> >  Protocol:	2.00-2.01
> > +============	===================
> >  
> >    When using protocol 2.00 or 2.01, if the real mode kernel is not
> >    loaded at 0x90000, it gets moved there later in the loading
> > @@ -447,14 +504,16 @@ Protocol:	2.00-2.01
> >    itself.
> >  
> >    The unit is bytes starting with the beginning of the boot sector.
> > -  
> > +
> >    This field is can be ignored when the protocol is 2.02 or higher, or
> >    if the real-mode code is loaded at 0x90000.
> >  
> > +============	========================
> >  Field name:	code32_start
> >  Type:		modify (optional, reloc)
> >  Offset/size:	0x214/4
> >  Protocol:	2.00+
> > +============	========================
> >  
> >    The address to jump to in protected mode.  This defaults to the load
> >    address of the kernel, and can be used by the boot loader to
> > @@ -462,47 +521,57 @@ Protocol:	2.00+
> >  
> >    This field can be modified for two purposes:
> >  
> > -  1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
> > +    1. as a boot loader hook (see Advanced Boot Loader Hooks below.)
> >  
> > -  2. if a bootloader which does not install a hook loads a
> > -     relocatable kernel at a nonstandard address it will have to modify
> > -     this field to point to the load address.
> > +    2. if a bootloader which does not install a hook loads a
> > +       relocatable kernel at a nonstandard address it will have to modify
> > +       this field to point to the load address.
> >  
> > +============	==================
> >  Field name:	ramdisk_image
> >  Type:		write (obligatory)
> >  Offset/size:	0x218/4
> >  Protocol:	2.00+
> > +============	==================
> >  
> >    The 32-bit linear address of the initial ramdisk or ramfs.  Leave at
> >    zero if there is no initial ramdisk/ramfs.
> >  
> > +============	==================
> >  Field name:	ramdisk_size
> >  Type:		write (obligatory)
> >  Offset/size:	0x21c/4
> >  Protocol:	2.00+
> > +============	==================
> >  
> >    Size of the initial ramdisk or ramfs.  Leave at zero if there is no
> >    initial ramdisk/ramfs.
> >  
> > +============	===============
> >  Field name:	bootsect_kludge
> >  Type:		kernel internal
> >  Offset/size:	0x220/4
> >  Protocol:	2.00+
> > +============	===============
> >  
> >    This field is obsolete.
> >  
> > +============	==================
> >  Field name:	heap_end_ptr
> >  Type:		write (obligatory)
> >  Offset/size:	0x224/2
> >  Protocol:	2.01+
> > +============	==================
> >  
> >    Set this field to the offset (from the beginning of the real-mode
> >    code) of the end of the setup stack/heap, minus 0x0200.
> >  
> > +============	================
> >  Field name:	ext_loader_ver
> >  Type:		write (optional)
> >  Offset/size:	0x226/1
> >  Protocol:	2.02+
> > +============	================
> >  
> >    This field is used as an extension of the version number in the
> >    type_of_loader field.  The total version number is considered to be
> > @@ -514,10 +583,12 @@ Protocol:	2.02+
> >    Kernels prior to 2.6.31 did not recognize this field, but it is safe
> >    to write for protocol version 2.02 or higher.
> >  
> > +============	=====================================================
> >  Field name:	ext_loader_type
> >  Type:		write (obligatory if (type_of_loader & 0xf0) == 0xe0)
> >  Offset/size:	0x227/1
> >  Protocol:	2.02+
> > +============	=====================================================
> >  
> >    This field is used as an extension of the type number in
> >    type_of_loader field.  If the type in type_of_loader is 0xE, then
> > @@ -528,10 +599,12 @@ Protocol:	2.02+
> >    Kernels prior to 2.6.31 did not recognize this field, but it is safe
> >    to write for protocol version 2.02 or higher.
> >  
> > +============	==================
> >  Field name:	cmd_line_ptr
> >  Type:		write (obligatory)
> >  Offset/size:	0x228/4
> >  Protocol:	2.02+
> > +============	==================
> >  
> >    Set this field to the linear address of the kernel command line.
> >    The kernel command line can be located anywhere between the end of
> > @@ -544,10 +617,12 @@ Protocol:	2.02+
> >    zero, the kernel will assume that your boot loader does not support
> >    the 2.02+ protocol.
> >  
> > +============	===============
> >  Field name:	initrd_addr_max
> >  Type:		read
> >  Offset/size:	0x22c/4
> >  Protocol:	2.03+
> > +============	===============
> >  
> >    The maximum address that may be occupied by the initial
> >    ramdisk/ramfs contents.  For boot protocols 2.02 or earlier, this
> > @@ -556,10 +631,12 @@ Protocol:	2.03+
> >    your ramdisk is exactly 131072 bytes long and this field is
> >    0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
> >  
> > +============	============================
> >  Field name:	kernel_alignment
> >  Type:		read/modify (reloc)
> >  Offset/size:	0x230/4
> >  Protocol:	2.05+ (read), 2.10+ (modify)
> > +============	============================
> >  
> >    Alignment unit required by the kernel (if relocatable_kernel is
> >    true.)  A relocatable kernel that is loaded at an alignment
> > @@ -571,25 +648,29 @@ Protocol:	2.05+ (read), 2.10+ (modify)
> >    loader to modify this field to permit a lesser alignment.  See the
> >    min_alignment and pref_address field below.
> >  
> > +============	==================
> >  Field name:	relocatable_kernel
> >  Type:		read (reloc)
> >  Offset/size:	0x234/1
> >  Protocol:	2.05+
> > +============	==================
> >  
> >    If this field is nonzero, the protected-mode part of the kernel can
> >    be loaded at any address that satisfies the kernel_alignment field.
> >    After loading, the boot loader must set the code32_start field to
> >    point to the loaded code, or to a boot loader hook.
> >  
> > +============	=============
> >  Field name:	min_alignment
> >  Type:		read (reloc)
> >  Offset/size:	0x235/1
> >  Protocol:	2.10+
> > +============	=============
> >  
> >    This field, if nonzero, indicates as a power of two the minimum
> >    alignment required, as opposed to preferred, by the kernel to boot.
> >    If a boot loader makes use of this field, it should update the
> > -  kernel_alignment field with the alignment unit desired; typically:
> > +  kernel_alignment field with the alignment unit desired; typically::
> >  
> >  	kernel_alignment = 1 << min_alignment
> >  
> > @@ -597,44 +678,56 @@ Protocol:	2.10+
> >    misaligned kernel.  Therefore, a loader should typically try each
> >    power-of-two alignment from kernel_alignment down to this alignment.
> >  
> > -Field name:     xloadflags
> > -Type:           read
> > -Offset/size:    0x236/2
> > -Protocol:       2.12+
> > +============	==========
> > +Field name:	xloadflags
> > +Type:		read
> > +Offset/size:	0x236/2
> > +Protocol:	2.12+
> > +============	==========
> >  
> >    This field is a bitmask.
> >  
> >    Bit 0 (read):	XLF_KERNEL_64
> > +
> >  	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
> >  
> >    Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
> > +
> >          - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
> >  
> >    Bit 2 (read):	XLF_EFI_HANDOVER_32
> > +
> >  	- If 1, the kernel supports the 32-bit EFI handoff entry point
> >            given at handover_offset.
> >  
> >    Bit 3 (read): XLF_EFI_HANDOVER_64
> > +
> >  	- If 1, the kernel supports the 64-bit EFI handoff entry point
> >            given at handover_offset + 0x200.
> >  
> >    Bit 4 (read): XLF_EFI_KEXEC
> > +
> >  	- If 1, the kernel supports kexec EFI boot with EFI runtime support.
> >  
> > +
> > +============	============
> >  Field name:	cmdline_size
> >  Type:		read
> >  Offset/size:	0x238/4
> >  Protocol:	2.06+
> > +============	============
> >  
> >    The maximum size of the command line without the terminating
> >    zero. This means that the command line can contain at most
> >    cmdline_size characters. With protocol version 2.05 and earlier, the
> >    maximum size was 255.
> >  
> > +============	====================================
> >  Field name:	hardware_subarch
> >  Type:		write (optional, defaults to x86/PC)
> >  Offset/size:	0x23c/4
> >  Protocol:	2.07+
> > +============	====================================
> >  
> >    In a paravirtualized environment the hardware low level architectural
> >    pieces such as interrupt handling, page table handling, and
> > @@ -643,25 +736,31 @@ Protocol:	2.07+
> >    This field allows the bootloader to inform the kernel we are in one
> >    one of those environments.
> >  
> > +  ==========	==============================
> >    0x00000000	The default x86/PC environment
> >    0x00000001	lguest
> >    0x00000002	Xen
> >    0x00000003	Moorestown MID
> >    0x00000004	CE4100 TV Platform
> > +  ==========	==============================
> >  
> > +============	=========================
> >  Field name:	hardware_subarch_data
> >  Type:		write (subarch-dependent)
> >  Offset/size:	0x240/8
> >  Protocol:	2.07+
> > +============	=========================
> >  
> >    A pointer to data that is specific to hardware subarch
> >    This field is currently unused for the default x86/PC environment,
> >    do not modify.
> >  
> > +============	==============
> >  Field name:	payload_offset
> >  Type:		read
> >  Offset/size:	0x248/4
> >  Protocol:	2.08+
> > +============	==============
> >  
> >    If non-zero then this field contains the offset from the beginning
> >    of the protected-mode code to the payload.
> > @@ -674,29 +773,33 @@ Protocol:	2.08+
> >    02 21).  The uncompressed payload is currently always ELF (magic
> >    number 7F 45 4C 46).
> >  
> > +============	==============
> >  Field name:	payload_length
> >  Type:		read
> >  Offset/size:	0x24c/4
> >  Protocol:	2.08+
> > +============	==============
> >  
> >    The length of the payload.
> >  
> > +============	===============
> >  Field name:	setup_data
> >  Type:		write (special)
> >  Offset/size:	0x250/8
> >  Protocol:	2.09+
> > +============	===============
> >  
> >    The 64-bit physical pointer to NULL terminated single linked list of
> >    struct setup_data. This is used to define a more extensible boot
> >    parameters passing mechanism. The definition of struct setup_data is
> > -  as follow:
> > +  as follow::
> >  
> > -  struct setup_data {
> > -	  u64 next;
> > -	  u32 type;
> > -	  u32 len;
> > -	  u8  data[0];
> > -  };
> > +	struct setup_data {
> > +		u64 next;
> > +		u32 type;
> > +		u32 len;
> > +		u8  data[0];
> > +	};
> >  
> >    Where, the next is a 64-bit physical pointer to the next node of
> >    linked list, the next field of the last node is 0; the type is used
> > @@ -708,10 +811,12 @@ Protocol:	2.09+
> >    sure to consider the case where the linked list already contains
> >    entries.
> >  
> > +============	============
> >  Field name:	pref_address
> >  Type:		read (reloc)
> >  Offset/size:	0x258/8
> >  Protocol:	2.10+
> > +============	============
> >  
> >    This field, if nonzero, represents a preferred load address for the
> >    kernel.  A relocating bootloader should attempt to load at this
> > @@ -720,9 +825,11 @@ Protocol:	2.10+
> >    A non-relocatable kernel will unconditionally move itself and to run
> >    at this address.
> >  
> > +============	=======
> >  Field name:	init_size
> >  Type:		read
> >  Offset/size:	0x260/4
> > +============	=======
> >  
> >    This field indicates the amount of linear contiguous memory starting
> >    at the kernel runtime start address that the kernel needs before it
> > @@ -731,16 +838,18 @@ Offset/size:	0x260/4
> >    be used by a relocating boot loader to help select a safe load
> >    address for the kernel.
> >  
> > -  The kernel runtime start address is determined by the following algorithm:
> > +  The kernel runtime start address is determined by the following algorithm::
> >  
> > -  if (relocatable_kernel)
> > +	if (relocatable_kernel)
> >  	runtime_start = align_up(load_address, kernel_alignment)
> > -  else
> > +	else
> >  	runtime_start = pref_address
> >  
> > +============	===============
> >  Field name:	handover_offset
> >  Type:		read
> >  Offset/size:	0x264/4
> > +============	===============
> >  
> >    This field is the offset from the beginning of the kernel image to
> >    the EFI handover protocol entry point. Boot loaders using the EFI
> > @@ -749,7 +858,8 @@ Offset/size:	0x264/4
> >    See EFI HANDOVER PROTOCOL below for more details.
> >  
> >  
> > -**** THE IMAGE CHECKSUM
> > +The Image Checksum
> > +==================
> >  
> >  From boot protocol version 2.08 onwards the CRC-32 is calculated over
> >  the entire file using the characteristic polynomial 0x04C11DB7 and an
> > @@ -758,7 +868,8 @@ file; therefore the CRC of the file up to the limit specified in the
> >  syssize field of the header is always 0.
> >  
> >  
> > -**** THE KERNEL COMMAND LINE
> > +The Kernel Command Line
> > +=======================
> >  
> >  The kernel command line has become an important way for the boot
> >  loader to communicate with the kernel.  Some of its options are also
> > @@ -778,19 +889,20 @@ heap and 0xA0000.
> >  If the protocol version is *not* 2.02 or higher, the kernel
> >  command line is entered using the following protocol:
> >  
> > -	At offset 0x0020 (word), "cmd_line_magic", enter the magic
> > -	number 0xA33F.
> > +  - At offset 0x0020 (word), "cmd_line_magic", enter the magic
> > +    number 0xA33F.
> > +
> > +  - At offset 0x0022 (word), "cmd_line_offset", enter the offset
> > +    of the kernel command line (relative to the start of the
> > +    real-mode kernel).
> >  
> > -	At offset 0x0022 (word), "cmd_line_offset", enter the offset
> > -	of the kernel command line (relative to the start of the
> > -	real-mode kernel).
> > -	
> > -	The kernel command line *must* be within the memory region
> > -	covered by setup_move_size, so you may need to adjust this
> > -	field.
> > +  - The kernel command line *must* be within the memory region
> > +    covered by setup_move_size, so you may need to adjust this
> > +    field.
> >  
> >  
> > -**** MEMORY LAYOUT OF THE REAL-MODE CODE
> > +Memory Layout of The Real-Mode Code
> > +===================================
> >  
> >  The real-mode code requires a stack/heap to be set up, as well as
> >  memory allocated for the kernel command line.  This needs to be done
> > @@ -806,10 +918,11 @@ segment has to be used:
> >  	- When loading a zImage kernel ((loadflags & 0x01) == 0).
> >  	- When loading a 2.01 or earlier boot protocol kernel.
> >  
> > -	  -> For the 2.00 and 2.01 boot protocols, the real-mode code  
> > -	     can be loaded at another address, but it is internally
> > -	     relocated to 0x90000.  For the "old" protocol, the
> > -	     real-mode code must be loaded at 0x90000.
> > +.. note::
> > +     For the 2.00 and 2.01 boot protocols, the real-mode code
> > +     can be loaded at another address, but it is internally
> > +     relocated to 0x90000.  For the "old" protocol, the
> > +     real-mode code must be loaded at 0x90000.
> >  
> >  When loading at 0x90000, avoid using memory above 0x9a000.
> >  
> > @@ -822,24 +935,29 @@ The kernel command line should not be located below the real-mode
> >  code, nor should it be located in high memory.
> >  
> >  
> > -**** SAMPLE BOOT CONFIGURATION
> > +Sample Boot Configuartion
> > +=========================
> >  
> >  As a sample configuration, assume the following layout of the real
> > -mode segment:
> > +mode segment.
> >  
> >      When loading below 0x90000, use the entire segment:
> >  
> > +        =============	===================
> >  	0x0000-0x7fff	Real mode kernel
> >  	0x8000-0xdfff	Stack and heap
> >  	0xe000-0xffff	Kernel command line
> > +	=============	===================
> >  
> >      When loading at 0x90000 OR the protocol version is 2.01 or earlier:
> >  
> > +	=============	===================
> >  	0x0000-0x7fff	Real mode kernel
> >  	0x8000-0x97ff	Stack and heap
> >  	0x9800-0x9fff	Kernel command line
> > +	=============	===================
> >  
> > -Such a boot loader should enter the following fields in the header:
> > +Such a boot loader should enter the following fields in the header::
> >  
> >  	unsigned long base_ptr;	/* base address for real-mode segment */
> >  
> > @@ -898,7 +1016,8 @@ Such a boot loader should enter the following fields in the header:
> >  	}
> >  
> >  
> > -**** LOADING THE REST OF THE KERNEL
> > +Loading The Rest of The Kernel
> > +==============================
> >  
> >  The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512
> >  in the kernel file (again, if setup_sects == 0 the real value is 4.)
> > @@ -906,7 +1025,7 @@ It should be loaded at address 0x10000 for Image/zImage kernels and
> >  0x100000 for bzImage kernels.
> >  
> >  The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01
> > -bit (LOAD_HIGH) in the loadflags field is set:
> > +bit (LOAD_HIGH) in the loadflags field is set::
> >  
> >  	is_bzImage = (protocol >= 0x0200) && (loadflags & 0x01);
> >  	load_address = is_bzImage ? 0x100000 : 0x10000;
> > @@ -916,8 +1035,8 @@ the entire 0x10000-0x90000 range of memory.  This means it is pretty
> >  much a requirement for these kernels to load the real-mode part at
> >  0x90000.  bzImage kernels allow much more flexibility.
> >  
> > -
> > -**** SPECIAL COMMAND LINE OPTIONS
> > +Special Command Line Options
> > +============================
> >  
> >  If the command line provided by the boot loader is entered by the
> >  user, the user may expect the following command line options to work.
> > @@ -966,7 +1085,8 @@ or configuration-specified command line.  Otherwise, "init=/bin/sh"
> >  gets confused by the "auto" option.
> >  
> >  
> > -**** RUNNING THE KERNEL
> > +Running the Kernel
> > +==================
> >  
> >  The kernel is started by jumping to the kernel entry point, which is
> >  located at *segment* offset 0x20 from the start of the real mode
> > @@ -980,7 +1100,7 @@ interrupts should be disabled.  Furthermore, to guard against bugs in
> >  the kernel, it is recommended that the boot loader sets fs = gs = ds =
> >  es = ss.
> >  
> > -In our example from above, we would do:
> > +In our example from above, we would do::
> >  
> >  	/* Note: in the case of the "old" kernel protocol, base_ptr must
> >  	   be == 0x90000 at this point; see the previous sample code */
> > @@ -1003,7 +1123,8 @@ switched off, especially if the loaded kernel has the floppy driver as
> >  a demand-loaded module!
> >  
> >  
> > -**** ADVANCED BOOT LOADER HOOKS
> > +Advanced Boot Loader Hooks
> > +==========================
> >  
> >  If the boot loader runs in a particularly hostile environment (such as
> >  LOADLIN, which runs under DOS) it may be impossible to follow the
> > @@ -1032,7 +1153,8 @@ IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and
> >  	(relocated, if appropriate.)
> >  
> >  
> > -**** 32-bit BOOT PROTOCOL
> > +32-bit Boot Protocol
> > +====================
> >  
> >  For machine with some new BIOS other than legacy BIOS, such as EFI,
> >  LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel
> > @@ -1045,7 +1167,7 @@ traditionally known as "zero page"). The memory for struct boot_params
> >  should be allocated and initialized to all zero. Then the setup header
> >  from offset 0x01f1 of kernel image on should be loaded into struct
> >  boot_params and examined. The end of setup header can be calculated as
> > -follow:
> > +follow::
> >  
> >  	0x0202 + byte value at offset 0x0201
> >  
> > @@ -1069,7 +1191,8 @@ must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
> >  must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
> >  address of the struct boot_params; %ebp, %edi and %ebx must be zero.
> >  
> > -**** 64-bit BOOT PROTOCOL
> > +64-bit Boot Protocol
> > +====================
> >  
> >  For machine with 64bit cpus and 64bit kernel, we could use 64bit bootloader
> >  and we need a 64-bit boot protocol.
> > @@ -1080,7 +1203,7 @@ traditionally known as "zero page"). The memory for struct boot_params
> >  could be allocated anywhere (even above 4G) and initialized to all zero.
> >  Then, the setup header at offset 0x01f1 of kernel image on should be
> >  loaded into struct boot_params and examined. The end of setup header
> > -can be calculated as follows:
> > +can be calculated as follows::
> >  
> >  	0x0202 + byte value at offset 0x0201
> >  
> > @@ -1107,7 +1230,8 @@ must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
> >  must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base
> >  address of the struct boot_params.
> >  
> > -**** EFI HANDOVER PROTOCOL
> > +EFI Handover Protocol
> > +=====================
> >  
> >  This protocol allows boot loaders to defer initialisation to the EFI
> >  boot stub. The boot loader is required to load the kernel/initrd(s)
> > @@ -1115,7 +1239,7 @@ from the boot media and jump to the EFI handover protocol entry point
> >  which is hdr->handover_offset bytes from the beginning of
> >  startup_{32,64}.
> >  
> > -The function prototype for the handover entry point looks like this,
> > +The function prototype for the handover entry point looks like this::
> >  
> >      efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
> >  
> > @@ -1124,11 +1248,11 @@ firmware, 'table' is the EFI system table - these are the first two
> >  arguments of the "handoff state" as described in section 2.3 of the
> >  UEFI specification. 'bp' is the boot loader-allocated boot params.
> >  
> > -The boot loader *must* fill out the following fields in bp,
> > +The boot loader *must* fill out the following fields in bp::
> >  
> > -    o hdr.code32_start
> > -    o hdr.cmd_line_ptr
> > -    o hdr.ramdisk_image (if applicable)
> > -    o hdr.ramdisk_size  (if applicable)
> > +  - hdr.code32_start
> > +  - hdr.cmd_line_ptr
> > +  - hdr.ramdisk_image (if applicable)
> > +  - hdr.ramdisk_size  (if applicable)
> >  
> >  All other fields should be zero.
> > diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst
> > index 9f34545a9c52..d7fc8efac192 100644
> > --- a/Documentation/x86/index.rst
> > +++ b/Documentation/x86/index.rst
> > @@ -7,3 +7,5 @@ x86-specific Documentation
> >  .. toctree::
> >     :maxdepth: 2
> >     :numbered:
> > +
> > +   boot
> 
> 
> 
> Thanks,
> Mauro

-- 
Cheers,
Changbin Du