Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To:     p.zabel@pengutronix.de, robh+dt@kernel.org
Cc:     linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        haitao.suo@bitmain.com, darren.tsao@bitmain.com,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v2 0/4] Add reset controller support for BM1880 SoC
Date:   Wed,  8 May 2019 22:23:15 +0530
Message-Id: <20190508165319.19822-1-manivannan.sadhasivam@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hello,

This patchset adds reset controller support for Bitmain BM1880 SoC.
BM1880 SoC has two reset controllers each controlling reset lines of
different peripherals. And the reset-simple driver has been reused here.

This patchset has been tested on 96Boards Sophon Edge board.

Thanks,
Mani

Changes in v2:

As per review from Philipp:

* Reused reset_simple_active_low struct instead of a new one for bm1880
* Splitted the SPDX license change to a separate commit
* Added Reviewed-by tags from Rob and Philipp

Manivannan Sadhasivam (4):
  dt-bindings: reset: Add devicetree binding for BM1880 reset controller
  arm64: dts: bitmain: Add reset controller support for BM1880 SoC
  reset: Add reset controller support for BM1880 SoC
  reset: Switch to SPDX license identifier for reset-simple

 .../bindings/reset/bitmain,bm1880-reset.txt   |  18 +++
 arch/arm64/boot/dts/bitmain/bm1880.dtsi       |  17 +++
 drivers/reset/Kconfig                         |   3 +-
 drivers/reset/reset-simple.c                  |   8 +-
 .../dt-bindings/reset/bitmain,bm1880-reset.h  | 106 ++++++++++++++++++
 5 files changed, 146 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
 create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h

-- 
2.17.1