Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Kevin Hilman <khilman@baylibre.com>
To:     Neil Armstrong <narmstrong@baylibre.com>
Cc:     baylibre-upstreaming@groups.io,
        Neil Armstrong <narmstrong@baylibre.com>,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] arm64: dts: meson-g12a: Add IR nodes
In-Reply-To: <20190412100518.24470-2-narmstrong@baylibre.com>
References: <20190412100518.24470-1-narmstrong@baylibre.com> <20190412100518.24470-2-narmstrong@baylibre.com>
Date:   Wed, 08 May 2019 16:05:44 -0700
Message-ID: <7h1s18im2f.fsf@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Neil Armstrong <narmstrong@baylibre.com> writes:

> Amlogic G12A SoCs uses the exact same IR decoder as previous
> families, add the IR node and the pintctrl setting.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> index 734c5ee60efa..9cb76d325bb7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> @@ -559,6 +559,13 @@
>  						mux {
>  							groups = "pwm_ao_d_e";
>  							function = "pwm_ao_d";
> +						};
> +					};

nit: you had applied this based on top of the PWM series, but didn't
mention that in the cover letter.

Kevin

> +					remote_input_ao_pins: remote-input-ao {
> +						mux {
> +							groups = "remote_ao_input";
> +							function = "remote_ao_input";
>  							bias-disable;
>  						};
>  					};
> @@ -623,6 +630,13 @@
>  				status = "disabled";
>  			};
>  
> +			ir: ir@8000 {
> +				compatible = "amlogic,meson-gxbb-ir";
> +				reg = <0x0 0x8000 0x0 0x20>;
> +				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +			};
> +
>  			saradc: adc@9000 {
>  				compatible = "amlogic,meson-g12a-saradc",
>  					     "amlogic,meson-saradc";
> -- 
> 2.21.0