Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Fri, 17 May 2019 11:50:56 +0800
From:   Wu Hao <hao.wu@intel.com>
To:     Alan Tull <atull@kernel.org>
Cc:     Scott Wood <swood@redhat.com>, Moritz Fischer <mdf@kernel.org>,
        linux-fpga@vger.kernel.org,
        linux-kernel <linux-kernel@vger.kernel.org>,
        linux-api@vger.kernel.org, Ananda Ravuri <ananda.ravuri@intel.com>,
        Xu Yilun <yilun.xu@intel.com>
Subject: Re: [PATCH v2 04/18] fpga: dfl: fme: support 512bit data width PR
Message-ID: <20190517035056.GB20569@hao-dev>
References: <1556528151-17221-1-git-send-email-hao.wu@intel.com>
 <1556528151-17221-5-git-send-email-hao.wu@intel.com>
 <CANk1AXSuacSP79gtxiOUdf3pKgq0-eWXoeoQdTYX4QV4=NedDA@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CANk1AXSuacSP79gtxiOUdf3pKgq0-eWXoeoQdTYX4QV4=NedDA@mail.gmail.com>
User-Agent: Mutt/1.5.24 (2015-08-30)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, May 16, 2019 at 12:35:27PM -0500, Alan Tull wrote:
> On Mon, Apr 29, 2019 at 4:12 AM Wu Hao <hao.wu@intel.com> wrote:
> 
> It looks like this addressed the review comments.  Adding my Ack.  Is
> there anything else on this patch?

Nothing else, just addressed the review comments. : )

Thanks for the review and ack.

Hao

> 
> Alan
> 
> >
> > In early partial reconfiguration private feature, it only
> > supports 32bit data width when writing data to hardware for
> > PR. 512bit data width PR support is an important optimization
> > for some specific solutions (e.g. XEON with FPGA integrated),
> > it allows driver to use AVX512 instruction to improve the
> > performance of partial reconfiguration. e.g. programming one
> > 100MB bitstream image via this 512bit data width PR hardware
> > only takes ~300ms, but 32bit revision requires ~3s per test
> > result.
> >
> > Please note now this optimization is only done on revision 2
> > of this PR private feature which is only used in integrated
> > solution that AVX512 is always supported. This revision 2
> > hardware doesn't support 32bit PR.
> >
> > Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com>
> > Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> > Signed-off-by: Wu Hao <hao.wu@intel.com>
> 
> Acked-by: Alan Tull <atull@kernel.org>
> 
> 
> > ---
> > v2: check AVX512 support using cpu_feature_enabled()
> >     fix other comments from Scott Wood <swood@redhat.com>
> > ---
> >  drivers/fpga/dfl-fme-main.c |   3 ++
> >  drivers/fpga/dfl-fme-mgr.c  | 113 +++++++++++++++++++++++++++++++++++++-------
> >  drivers/fpga/dfl-fme-pr.c   |  43 +++++++++++------
> >  drivers/fpga/dfl-fme.h      |   2 +
> >  drivers/fpga/dfl.h          |   5 ++
> >  5 files changed, 135 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> > index 086ad24..076d74f 100644
> > --- a/drivers/fpga/dfl-fme-main.c
> > +++ b/drivers/fpga/dfl-fme-main.c
> > @@ -21,6 +21,8 @@
> >  #include "dfl.h"
> >  #include "dfl-fme.h"
> >
> > +#define DRV_VERSION    "0.8"
> > +
> >  static ssize_t ports_num_show(struct device *dev,
> >                               struct device_attribute *attr, char *buf)
> >  {
> > @@ -277,3 +279,4 @@ static int fme_remove(struct platform_device *pdev)
> >  MODULE_AUTHOR("Intel Corporation");
> >  MODULE_LICENSE("GPL v2");
> >  MODULE_ALIAS("platform:dfl-fme");
> > +MODULE_VERSION(DRV_VERSION);
> > diff --git a/drivers/fpga/dfl-fme-mgr.c b/drivers/fpga/dfl-fme-mgr.c
> > index b3f7eee..d1a4ba5 100644
> > --- a/drivers/fpga/dfl-fme-mgr.c
> > +++ b/drivers/fpga/dfl-fme-mgr.c
> > @@ -22,14 +22,18 @@
> >  #include <linux/io-64-nonatomic-lo-hi.h>
> >  #include <linux/fpga/fpga-mgr.h>
> >
> > +#include "dfl.h"
> >  #include "dfl-fme-pr.h"
> >
> > +#define DRV_VERSION    "0.8"
> > +
> >  /* FME Partial Reconfiguration Sub Feature Register Set */
> >  #define FME_PR_DFH             0x0
> >  #define FME_PR_CTRL            0x8
> >  #define FME_PR_STS             0x10
> >  #define FME_PR_DATA            0x18
> >  #define FME_PR_ERR             0x20
> > +#define FME_PR_512_DATA                0x40 /* Data Register for 512bit datawidth PR */
> >  #define FME_PR_INTFC_ID_L      0xA8
> >  #define FME_PR_INTFC_ID_H      0xB0
> >
> > @@ -67,8 +71,43 @@
> >  #define PR_WAIT_TIMEOUT   8000000
> >  #define PR_HOST_STATUS_IDLE    0
> >
> > +#if defined(CONFIG_X86) && defined(CONFIG_AS_AVX512)
> > +
> > +#include <linux/cpufeature.h>
> > +#include <asm/fpu/api.h>
> > +
> > +static inline int is_cpu_avx512_enabled(void)
> > +{
> > +       return cpu_feature_enabled(X86_FEATURE_AVX512F);
> > +}
> > +
> > +static inline void copy512(const void *src, void __iomem *dst)
> > +{
> > +       kernel_fpu_begin();
> > +
> > +       asm volatile("vmovdqu64 (%0), %%zmm0;"
> > +                    "vmovntdq %%zmm0, (%1);"
> > +                    :
> > +                    : "r"(src), "r"(dst)
> > +                    : "memory");
> > +
> > +       kernel_fpu_end();
> > +}
> > +#else
> > +static inline int is_cpu_avx512_enabled(void)
> > +{
> > +       return 0;
> > +}
> > +
> > +static inline void copy512(const void *src, void __iomem *dst)
> > +{
> > +       WARN_ON_ONCE(1);
> > +}
> > +#endif
> > +
> >  struct fme_mgr_priv {
> >         void __iomem *ioaddr;
> > +       unsigned int pr_datawidth;
> >         u64 pr_error;
> >  };
> >
> > @@ -169,7 +208,7 @@ static int fme_mgr_write(struct fpga_manager *mgr,
> >         struct fme_mgr_priv *priv = mgr->priv;
> >         void __iomem *fme_pr = priv->ioaddr;
> >         u64 pr_ctrl, pr_status, pr_data;
> > -       int delay = 0, pr_credit, i = 0;
> > +       int ret = 0, delay = 0, pr_credit;
> >
> >         dev_dbg(dev, "start request\n");
> >
> > @@ -181,9 +220,9 @@ static int fme_mgr_write(struct fpga_manager *mgr,
> >
> >         /*
> >          * driver can push data to PR hardware using PR_DATA register once HW
> > -        * has enough pr_credit (> 1), pr_credit reduces one for every 32bit
> > -        * pr data write to PR_DATA register. If pr_credit <= 1, driver needs
> > -        * to wait for enough pr_credit from hardware by polling.
> > +        * has enough pr_credit (> 1), pr_credit reduces one for every pr data
> > +        * width write to PR_DATA register. If pr_credit <= 1, driver needs to
> > +        * wait for enough pr_credit from hardware by polling.
> >          */
> >         pr_status = readq(fme_pr + FME_PR_STS);
> >         pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> > @@ -192,7 +231,8 @@ static int fme_mgr_write(struct fpga_manager *mgr,
> >                 while (pr_credit <= 1) {
> >                         if (delay++ > PR_WAIT_TIMEOUT) {
> >                                 dev_err(dev, "PR_CREDIT timeout\n");
> > -                               return -ETIMEDOUT;
> > +                               ret = -ETIMEDOUT;
> > +                               goto done;
> >                         }
> >                         udelay(1);
> >
> > @@ -200,21 +240,27 @@ static int fme_mgr_write(struct fpga_manager *mgr,
> >                         pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> >                 }
> >
> > -               if (count < 4) {
> > -                       dev_err(dev, "Invalid PR bitstream size\n");
> > -                       return -EINVAL;
> > +               WARN_ON(count < priv->pr_datawidth);
> > +
> > +               switch (priv->pr_datawidth) {
> > +               case 4:
> > +                       pr_data = FIELD_PREP(FME_PR_DATA_PR_DATA_RAW,
> > +                                            *(u32 *)buf);
> > +                       writeq(pr_data, fme_pr + FME_PR_DATA);
> > +                       break;
> > +               case 64:
> > +                       copy512(buf, fme_pr + FME_PR_512_DATA);
> > +                       break;
> > +               default:
> > +                       WARN_ON_ONCE(1);
> >                 }
> > -
> > -               pr_data = 0;
> > -               pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW,
> > -                                     *(((u32 *)buf) + i));
> > -               writeq(pr_data, fme_pr + FME_PR_DATA);
> > -               count -= 4;
> > +               buf += priv->pr_datawidth;
> > +               count -= priv->pr_datawidth;
> >                 pr_credit--;
> > -               i++;
> >         }
> >
> > -       return 0;
> > +done:
> > +       return ret;
> >  }
> >
> >  static int fme_mgr_write_complete(struct fpga_manager *mgr,
> > @@ -279,6 +325,36 @@ static void fme_mgr_get_compat_id(void __iomem *fme_pr,
> >         id->id_h = readq(fme_pr + FME_PR_INTFC_ID_H);
> >  }
> >
> > +static u8 fme_mgr_get_pr_datawidth(struct device *dev, void __iomem *fme_pr)
> > +{
> > +       u8 revision = dfl_feature_revision(fme_pr);
> > +
> > +       if (revision < 2) {
> > +               /*
> > +                * revision 0 and 1 only support 32bit data width partial
> > +                * reconfiguration, so pr_datawidth is 4 (Byte).
> > +                */
> > +               return 4;
> > +       } else if (revision == 2) {
> > +               /*
> > +                * revision 2 hardware has optimization to support 512bit data
> > +                * width partial reconfiguration with AVX512 instructions. So
> > +                * pr_datawidth is 64 (Byte). As revision 2 hardware is only
> > +                * used in integrated solution, CPU supports AVX512 instructions
> > +                * for sure, but it still needs to check here as AVX512 could be
> > +                * disabled in kernel (e.g. using clearcpuid boot option).
> > +                */
> > +               if (is_cpu_avx512_enabled())
> > +                       return 64;
> > +
> > +               dev_err(dev, "revision 2: AVX512 is disabled\n");
> > +               return 0;
> > +       }
> > +
> > +       dev_err(dev, "revision %d is not supported yet\n", revision);
> > +       return 0;
> > +}
> > +
> >  static int fme_mgr_probe(struct platform_device *pdev)
> >  {
> >         struct dfl_fme_mgr_pdata *pdata = dev_get_platdata(&pdev->dev);
> > @@ -302,6 +378,10 @@ static int fme_mgr_probe(struct platform_device *pdev)
> >                         return PTR_ERR(priv->ioaddr);
> >         }
> >
> > +       priv->pr_datawidth = fme_mgr_get_pr_datawidth(dev, priv->ioaddr);
> > +       if (!priv->pr_datawidth)
> > +               return -ENODEV;
> > +
> >         compat_id = devm_kzalloc(dev, sizeof(*compat_id), GFP_KERNEL);
> >         if (!compat_id)
> >                 return -ENOMEM;
> > @@ -342,3 +422,4 @@ static int fme_mgr_remove(struct platform_device *pdev)
> >  MODULE_AUTHOR("Intel Corporation");
> >  MODULE_LICENSE("GPL v2");
> >  MODULE_ALIAS("platform:dfl-fme-mgr");
> > +MODULE_VERSION(DRV_VERSION);
> > diff --git a/drivers/fpga/dfl-fme-pr.c b/drivers/fpga/dfl-fme-pr.c
> > index 3c71dc3..cd94ba8 100644
> > --- a/drivers/fpga/dfl-fme-pr.c
> > +++ b/drivers/fpga/dfl-fme-pr.c
> > @@ -83,7 +83,7 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
> >         if (copy_from_user(&port_pr, argp, minsz))
> >                 return -EFAULT;
> >
> > -       if (port_pr.argsz < minsz || port_pr.flags)
> > +       if (port_pr.argsz < minsz || port_pr.flags || !port_pr.buffer_size)
> >                 return -EINVAL;
> >
> >         /* get fme header region */
> > @@ -101,15 +101,25 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
> >                        port_pr.buffer_size))
> >                 return -EFAULT;
> >
> > +       mutex_lock(&pdata->lock);
> > +       fme = dfl_fpga_pdata_get_private(pdata);
> > +       /* fme device has been unregistered. */
> > +       if (!fme) {
> > +               ret = -EINVAL;
> > +               goto unlock_exit;
> > +       }
> > +
> >         /*
> >          * align PR buffer per PR bandwidth, as HW ignores the extra padding
> >          * data automatically.
> >          */
> > -       length = ALIGN(port_pr.buffer_size, 4);
> > +       length = ALIGN(port_pr.buffer_size, fme->pr_datawidth);
> >
> >         buf = vmalloc(length);
> > -       if (!buf)
> > -               return -ENOMEM;
> > +       if (!buf) {
> > +               ret = -ENOMEM;
> > +               goto unlock_exit;
> > +       }
> >
> >         if (copy_from_user(buf,
> >                            (void __user *)(unsigned long)port_pr.buffer_address,
> > @@ -127,18 +137,10 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
> >
> >         info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
> >
> > -       mutex_lock(&pdata->lock);
> > -       fme = dfl_fpga_pdata_get_private(pdata);
> > -       /* fme device has been unregistered. */
> > -       if (!fme) {
> > -               ret = -EINVAL;
> > -               goto unlock_exit;
> > -       }
> > -
> >         region = dfl_fme_region_find(fme, port_pr.port_id);
> >         if (!region) {
> >                 ret = -EINVAL;
> > -               goto unlock_exit;
> > +               goto free_exit;
> >         }
> >
> >         fpga_image_info_free(region->info);
> > @@ -159,10 +161,10 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
> >                 fpga_bridges_put(&region->bridge_list);
> >
> >         put_device(&region->dev);
> > -unlock_exit:
> > -       mutex_unlock(&pdata->lock);
> >  free_exit:
> >         vfree(buf);
> > +unlock_exit:
> > +       mutex_unlock(&pdata->lock);
> >         return ret;
> >  }
> >
> > @@ -388,6 +390,17 @@ static int pr_mgmt_init(struct platform_device *pdev,
> >         mutex_lock(&pdata->lock);
> >         priv = dfl_fpga_pdata_get_private(pdata);
> >
> > +       /*
> > +        * Initialize PR data width.
> > +        * Only revision 2 supports 512bit datawidth for better performance,
> > +        * other revisions use default 32bit datawidth. This is used for
> > +        * buffer alignment.
> > +        */
> > +       if (dfl_feature_revision(feature->ioaddr) == 2)
> > +               priv->pr_datawidth = 64;
> > +       else
> > +               priv->pr_datawidth = 4;
> > +
> >         /* Initialize the region and bridge sub device list */
> >         INIT_LIST_HEAD(&priv->region_list);
> >         INIT_LIST_HEAD(&priv->bridge_list);
> > diff --git a/drivers/fpga/dfl-fme.h b/drivers/fpga/dfl-fme.h
> > index 5394a21..de20755 100644
> > --- a/drivers/fpga/dfl-fme.h
> > +++ b/drivers/fpga/dfl-fme.h
> > @@ -21,12 +21,14 @@
> >  /**
> >   * struct dfl_fme - dfl fme private data
> >   *
> > + * @pr_datawidth: data width for partial reconfiguration.
> >   * @mgr: FME's FPGA manager platform device.
> >   * @region_list: linked list of FME's FPGA regions.
> >   * @bridge_list: linked list of FME's FPGA bridges.
> >   * @pdata: fme platform device's pdata.
> >   */
> >  struct dfl_fme {
> > +       int pr_datawidth;
> >         struct platform_device *mgr;
> >         struct list_head region_list;
> >         struct list_head bridge_list;
> > diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
> > index a8b869e..8851c6c 100644
> > --- a/drivers/fpga/dfl.h
> > +++ b/drivers/fpga/dfl.h
> > @@ -331,6 +331,11 @@ static inline bool dfl_feature_is_port(void __iomem *base)
> >                 (FIELD_GET(DFH_ID, v) == DFH_ID_FIU_PORT);
> >  }
> >
> > +static inline u8 dfl_feature_revision(void __iomem *base)
> > +{
> > +       return (u8)FIELD_GET(DFH_REVISION, readq(base + DFH));
> > +}
> > +
> >  /**
> >   * struct dfl_fpga_enum_info - DFL FPGA enumeration information
> >   *
> > --
> > 1.8.3.1
> >