Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Neil Armstrong <narmstrong@baylibre.com>
To:     a.hajda@samsung.com, Laurent.pinchart@ideasonboard.com
Cc:     jonas@kwiboo.se, hverkuil@xs4all.nl,
        Neil Armstrong <narmstrong@baylibre.com>,
        dri-devel@lists.freedesktop.org, jernej.skrabec@siol.net,
        heiko@sntech.de, maxime.ripard@bootlin.com, hjc@rock-chips.com,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 0/5] drm/meson: Add support for HDMI2.0 YUV420 4k60
Date:   Mon, 20 May 2019 15:37:48 +0200
Message-Id: <20190520133753.23871-1-narmstrong@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The Synopsys DW-HDMI CSC does not support downsampling to YUV420, so
the encoder must downsamle before, feeding the controller with a YUV420
pixel stream.

The encoder must declare the new bus format enc encoding the bridge, in
order to take it in account.

To solve this, a new format_set() bridge op is added, permitting setting
a new input bus format and encoding to the bridge chain.

This solves YUV420 setup, but also solved setting 10bit, 12bit or 16bit
input bus format in order to support HDMI >8bit depths.

The DW-HDMI controller is updated to dynamically select a coherent output
bus format depending on the input bus format and on the internal CSC
supported modes.

The DW-HDMI is also updated to support the connector display_info bus_formats
entry to permit forcing a specific output bus format to force, for example,
an YUV444 output format instead of the default RGB output bus format.

Only the meson DRM dw_hdmi glue allows ycbcr420 modes, so no breakage
is expected here.

The remaining patches adds support for 4:2:0 output and clock setup for
the meson DW-HDMI glue, and how YUV444 output can be forced.

Changes since rfc:
* Fixed small logic error in drm_bridge_format_set()
* rebased on v5.2-rc1

Neil Armstrong (5):
  drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a
  drm/bridge: add encoder support to specify bridge input format
  drm/bridge: dw-hdmi: Add support for dynamic output format setup
  drm/meson: Add YUV420 output support
  drm/meson: Output in YUV444 if sink supports it

 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 127 ++++++++++++++++++++--
 drivers/gpu/drm/drm_bridge.c              |  35 ++++++
 drivers/gpu/drm/meson/meson_dw_hdmi.c     | 111 ++++++++++++++++---
 drivers/gpu/drm/meson/meson_vclk.c        |  93 ++++++++++++----
 drivers/gpu/drm/meson/meson_vclk.h        |   7 +-
 drivers/gpu/drm/meson/meson_venc.c        |   6 +-
 drivers/gpu/drm/meson/meson_venc.h        |  11 ++
 drivers/gpu/drm/meson/meson_venc_cvbs.c   |   3 +-
 include/drm/bridge/dw_hdmi.h              |   1 +
 include/drm/drm_bridge.h                  |  19 ++++
 10 files changed, 358 insertions(+), 55 deletions(-)

-- 
2.21.0