Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Mark Brown <broonie@kernel.org>
To:     Axel Lin <axel.lin@ingics.com>
Cc:     Eric Jeong <eric.jeong.opensource@diasemi.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
        Support Opensource <support.opensource@diasemi.com>
Subject: Applied "regulator: slg51000: Constify slg51000_regl_ops and slg51000_switch_ops" to the regulator tree
In-Reply-To: <20190524100247.7267-1-axel.lin@ingics.com>
Message-Id: <20190524121246.E219E440049@finisterre.sirena.org.uk>
Date:   Fri, 24 May 2019 13:12:46 +0100 (BST)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The patch

   regulator: slg51000: Constify slg51000_regl_ops and slg51000_switch_ops

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 0a33d4feea748399c9341ff054c5f29c98393d35 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Fri, 24 May 2019 18:02:46 +0800
Subject: [PATCH] regulator: slg51000: Constify slg51000_regl_ops and
 slg51000_switch_ops

These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/slg51000-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c
index 12e21d43030b..a06a18f220e0 100644
--- a/drivers/regulator/slg51000-regulator.c
+++ b/drivers/regulator/slg51000-regulator.c
@@ -183,7 +183,7 @@ static const struct regmap_config slg51000_regmap_config = {
 	.volatile_table = &slg51000_volatile_table,
 };
 
-static struct regulator_ops slg51000_regl_ops = {
+static const struct regulator_ops slg51000_regl_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -193,7 +193,7 @@ static struct regulator_ops slg51000_regl_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 };
 
-static struct regulator_ops slg51000_switch_ops = {
+static const struct regulator_ops slg51000_switch_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
-- 
2.20.1