Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Neil Armstrong <narmstrong@baylibre.com>
To:     khilman@baylibre.com
Cc:     Neil Armstrong <narmstrong@baylibre.com>,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        christianshewitt@gmail.com
Subject: [PATCH 05/10] arm64: dts: meson-gxbb-vega-s95: fix regulators
Date:   Mon, 27 May 2019 15:21:55 +0200
Message-Id: <20190527132200.17377-6-narmstrong@baylibre.com>
In-Reply-To: <20190527132200.17377-1-narmstrong@baylibre.com>
References: <20190527132200.17377-1-narmstrong@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Align the regulator names with other GXBB SoCS for upcoming
SARADC support and SDIO/SDCard fixes.
Also fix how regulators are passed to MMC controllers & USB.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 34 ++++++++++++-------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 623bcb6594b1..760730d4e87b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -28,10 +28,10 @@
 		};
 	};
 
-	usb_vbus: regulator-usb0-vbus {
+	usb_pwr: regulator-usb-pwrs {
 		compatible = "regulator-fixed";
 
-		regulator-name = "USB0_VBUS";
+		regulator-name = "USB_PWR";
 
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -40,18 +40,25 @@
 		enable-active-high;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
@@ -133,8 +140,8 @@
 
 	mmc-pwrseq = <&sdio_pwrseq>;
 
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_1v8>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
 
 	brcmf: wifi@1 {
 		reg = <1>;
@@ -156,7 +163,8 @@
 
 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
-	vmmc-supply = <&vcc_3v3>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
 };
 
 /* eMMC */
@@ -176,7 +184,7 @@
 
 	mmc-pwrseq = <&emmc_pwrseq>;
 	vmmc-supply = <&vcc_3v3>;
-	vmmcq-sumpply = <&vcc_1v8>;
+	vqmmc-supply = <&vddio_boot>;
 };
 
 &uart_AO {
@@ -187,7 +195,7 @@
 
 &usb0_phy {
 	status = "okay";
-	phy-supply = <&usb_vbus>;
+	phy-supply = <&usb_pwr>;
 };
 
 &usb1_phy {
-- 
2.21.0