Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Tue, 28 May 2019 16:13:52 +0100
From:   Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To:     Stanimir Varbanov <svarbanov@mm-sol.com>
Cc:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/3] PCI: qcom: Use clk_bulk API for 2.4.0 controllers
Message-ID: <20190528151330.GA28649@redmoon>
References: <20190502001955.10575-1-bjorn.andersson@linaro.org>
 <20190502001955.10575-2-bjorn.andersson@linaro.org>
 <fcfcd3b4-99d2-7b10-e82d-b92e6bf37a33@mm-sol.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <fcfcd3b4-99d2-7b10-e82d-b92e6bf37a33@mm-sol.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, May 16, 2019 at 12:14:04PM +0300, Stanimir Varbanov wrote:
> Hi Bjorn,
> 
> On 5/2/19 3:19 AM, Bjorn Andersson wrote:
> > Before introducing the QCS404 platform, which uses the same PCIe
> > controller as IPQ4019, migrate this to use the bulk clock API, in order
> > to make the error paths slighly cleaner.
> > 
> > Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
> > Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > 
> > Changes since v2:
> > - Defined QCOM_PCIE_2_4_0_MAX_CLOCKS
> > 
> >  drivers/pci/controller/dwc/pcie-qcom.c | 49 ++++++++------------------
> >  1 file changed, 14 insertions(+), 35 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 0ed235d560e3..d740cbe0e56d 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -112,10 +112,10 @@ struct qcom_pcie_resources_2_3_2 {
> >  	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
> >  };
> >  
> > +#define QCOM_PCIE_2_4_0_MAX_CLOCKS	3
> >  struct qcom_pcie_resources_2_4_0 {
> > -	struct clk *aux_clk;
> > -	struct clk *master_clk;
> > -	struct clk *slave_clk;
> > +	struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS];
> > +	int num_clks;
> >  	struct reset_control *axi_m_reset;
> >  	struct reset_control *axi_s_reset;
> >  	struct reset_control *pipe_reset;
> > @@ -638,18 +638,17 @@ static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
> >  	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
> >  	struct dw_pcie *pci = pcie->pci;
> >  	struct device *dev = pci->dev;
> > +	int ret;
> >  
> > -	res->aux_clk = devm_clk_get(dev, "aux");
> > -	if (IS_ERR(res->aux_clk))
> > -		return PTR_ERR(res->aux_clk);
> > +	res->clks[0].id = "aux";
> > +	res->clks[1].id = "master_bus";
> > +	res->clks[2].id = "slave_bus";
> >  
> > -	res->master_clk = devm_clk_get(dev, "master_bus");
> > -	if (IS_ERR(res->master_clk))
> > -		return PTR_ERR(res->master_clk);
> > +	res->num_clks = 3;
> 
> Use the new fresh define QCOM_PCIE_2_4_0_MAX_CLOCKS?
> 
> >  
> > -	res->slave_clk = devm_clk_get(dev, "slave_bus");
> > -	if (IS_ERR(res->slave_clk))
> > -		return PTR_ERR(res->slave_clk);
> > +	ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
> > +	if (ret < 0)
> > +		return ret;
> >  
> >  	res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m");
> >  	if (IS_ERR(res->axi_m_reset))
> > @@ -719,9 +718,7 @@ static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
> >  	reset_control_assert(res->axi_m_sticky_reset);
> >  	reset_control_assert(res->pwr_reset);
> >  	reset_control_assert(res->ahb_reset);
> > -	clk_disable_unprepare(res->aux_clk);
> > -	clk_disable_unprepare(res->master_clk);
> > -	clk_disable_unprepare(res->slave_clk);
> > +	clk_bulk_disable_unprepare(res->num_clks, res->clks);
> >  }
> >  
> >  static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
> > @@ -850,23 +847,9 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
> >  
> >  	usleep_range(10000, 12000);
> >  
> > -	ret = clk_prepare_enable(res->aux_clk);
> > -	if (ret) {
> > -		dev_err(dev, "cannot prepare/enable iface clock\n");
> > +	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
> > +	if (ret)
> >  		goto err_clk_aux;
> 
> Maybe you have to change the name of the label too?
> 
> > -	}
> > -
> > -	ret = clk_prepare_enable(res->master_clk);
> > -	if (ret) {
> > -		dev_err(dev, "cannot prepare/enable core clock\n");
> > -		goto err_clk_axi_m;
> > -	}
> > -
> > -	ret = clk_prepare_enable(res->slave_clk);
> > -	if (ret) {
> > -		dev_err(dev, "cannot prepare/enable phy clock\n");
> > -		goto err_clk_axi_s;
> > -	}
> >  
> >  	/* enable PCIe clocks and resets */
> >  	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
> > @@ -891,10 +874,6 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
> >  
> >  	return 0;
> >  
> > -err_clk_axi_s:
> > -	clk_disable_unprepare(res->master_clk);
> > -err_clk_axi_m:
> > -	clk_disable_unprepare(res->aux_clk);
> >  err_clk_aux:
> >  	reset_control_assert(res->ahb_reset);
> >  err_rst_ahb:

Hi Bjorn, Stanimir,

can I merge the series as-is or we need a v4 for the requested
updates ? Please let me know.

Thanks,
Lorenzo