Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH 0/7] ARM: dts: Broadcom: Fix W=1 DTC warnings
To:     Florian Fainelli <f.fainelli@gmail.com>,
        linux-arm-kernel@lists.infradead.org
Cc:     Mark Rutland <mark.rutland@arm.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Scott Branden <sbranden@broadcom.com>,
        Ray Jui <rjui@broadcom.com>,
        =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= <zajec5@gmail.com>,
        open list <linux-kernel@vger.kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        "maintainer:BROADCOM IPROC ARM ARCHITECTURE" 
        <bcm-kernel-feedback-list@broadcom.com>,
        Gregory Fong <gregory.0xf0@gmail.com>,
        Hauke Mehrtens <hauke@hauke-m.de>,
        Brian Norris <computersforpeace@gmail.com>
References: <20190528230134.27007-1-f.fainelli@gmail.com>
From:   Stefan Wahren <wahrenst@gmx.net>
Message-ID: <070047b5-a101-e7b3-9ef3-7afc765921d9@gmx.net>
Date:   Thu, 30 May 2019 12:12:42 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
 Thunderbird/60.7.0
MIME-Version: 1.0
In-Reply-To: <20190528230134.27007-1-f.fainelli@gmail.com>
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Florian,

Am 29.05.19 um 01:01 schrieb Florian Fainelli:
> Hi all,
>
> This patch series attempts to fix the most obvious W=3D1 DTC warnings fo=
r
> Broadcom SoCs DTS files. Stefan, if you could do the same for all
> bcm283* that would be fantastic.

we tried to fix as much as possible in the past. So there are only those
left, which i don't know how to fix it properly (and without breaking
things):

arch/arm/boot/dts/bcm283x.dtsi:54.6-651.4: Warning
(unit_address_vs_reg): /soc: node has a reg or ranges property, but no
unit name

This from the SoC specific dtsi files which add values for the ranges /
dma-ranges.

soc {
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 ranges =3D <0x7e000000 0x20000000 0x=
02000000>;
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 dma-ranges =3D <0x40000000 0x0000000=
0 0x20000000>;
};

arch/arm/boot/dts/bcm283x.dtsi:648.12-650.5: Warning (simple_bus_reg):
/soc/gpu: missing or empty reg/ranges property

This comes from the following simple bus child node:

vc4: gpu {
=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 compatible =3D "b=
rcm,bcm2835-vc4";
};

This issue should also exists in bcm-cygnus.dtsi. From the hardware side
the GPU is part of the SoC, but maybe we should move this node out of
the SoC simple bus?

Stefan