Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 5 Jun 2019 14:46:22 -0700
From:   Guenter Roeck <linux@roeck-us.net>
To:     laurentiu.tudor@nxp.com
Cc:     hch@lst.de, stern@rowland.harvard.edu, gregkh@linuxfoundation.org,
        linux-usb@vger.kernel.org, marex@denx.de, leoyang.li@nxp.com,
        linux-kernel@vger.kernel.org, robin.murphy@arm.com,
        noring@nocrew.org, JuergenUrban@gmx.de
Subject: Re: [PATCH v7 3/5] usb: host: ohci-sm501: init genalloc for local
 memory
Message-ID: <20190605214622.GA22254@roeck-us.net>
References: <20190529102843.13174-1-laurentiu.tudor@nxp.com>
 <20190529102843.13174-4-laurentiu.tudor@nxp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20190529102843.13174-4-laurentiu.tudor@nxp.com>
User-Agent: Mutt/1.5.24 (2015-08-30)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, May 29, 2019 at 01:28:41PM +0300, laurentiu.tudor@nxp.com wrote:
> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> 
> In preparation for dropping the existing "coherent" dma mem declaration
> APIs, replace the current dma_declare_coherent_memory() based mechanism
> with the creation of a genalloc pool that will be used in the OHCI
> subsystem as replacement for the DMA APIs.
> 
> For context, see thread here: https://lkml.org/lkml/2019/4/22/357
> 
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>

This patch results in usb access failures when trying to boot from the
sm501-usb controller on sh4 with qemu.

usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 08 7c 00 00 f0 00
print_req_error: I/O error, dev sda, sector 2172 flags 80700
usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 01 da 00 00 f0 00
print_req_error: I/O error, dev sda, sector 474 flags 84700
usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 02 da 00 00 f0 00
print_req_error: I/O error, dev sda, sector 730 flags 84700
usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 0b 50 00 00 f0 00
print_req_error: I/O error, dev sda, sector 2896 flags 84700

Qemu command line is:

The qemu command line is:

qemu-system-sh4 -M r2d \
        -kernel ./arch/sh/boot/zImage \
	-snapshot \
	-usb -device usb-storage,drive=d0 \
	-drive file=rootfs.ext2,if=none,id=d0,format=raw \
	-append 'panic=-1 slub_debug=FZPUA root=/dev/sda rootwait console=ttySC1,115200 earlycon=scif,mmio16,0xffe80000 noiotrap' \
	-serial null -serial stdio \
	-net nic,model=rtl8139 -net user -nographic -monitor null

Reverting this patch as well as "USB: drop HCD_LOCAL_MEM flag" fixes the
problem. Reverting "USB: drop HCD_LOCAL_MEM flag" alone does not help.

Guenter