Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750801AbVKTICX (ORCPT ); Sun, 20 Nov 2005 03:02:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751163AbVKTICX (ORCPT ); Sun, 20 Nov 2005 03:02:23 -0500 Received: from mail13.syd.optusnet.com.au ([211.29.132.194]:24739 "EHLO mail13.syd.optusnet.com.au") by vger.kernel.org with ESMTP id S1750801AbVKTICW (ORCPT ); Sun, 20 Nov 2005 03:02:22 -0500 From: Con Kolivas To: linux kernel mailing list Subject: Re: [PATCH] i386 no idle hz - aka dynticks v051118-1 Date: Sun, 20 Nov 2005 19:02:12 +1100 User-Agent: KMail/1.8.3 Cc: ck@vds.kolivas.org References: <200511182322.11222.kernel@kolivas.org> In-Reply-To: <200511182322.11222.kernel@kolivas.org> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2093907.apOxxJK5Wd"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200511201902.14697.kernel@kolivas.org> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 44633 Lines: 1456 --nextPart2093907.apOxxJK5Wd Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Fri, 18 Nov 2005 23:22, Con Kolivas wrote: > So far this version seems to boot and run fine, but there are at least 2 > places in the kernel that need to be made aware of the fact they're runni= ng > dynticks; the ondemand scaling governor and the bus mastering code (as > pointed out by Tytso). Both don't realise the few ticks that have passed > are quite some distance apart and overestimate the load grossly. They are > not harmful, but lead to increase in power usage instead of a decrease. I > have yet to investigate that code portion to see what needs to be done After 2 days of uptime this patch did not show any instability nor time los= s. The only other issue that showed up was that per-process load is also calculated incorrectly so I need to address that as well. > The current patch is a series of 3 patches and a rollup and the split-out > patches are all available here: > http://ck.kolivas.org/patches/dyn-ticks/ And inlined again here again (unchanged) instead of attached. Cheers, Con =2D-- Index: linux-2.6.15-rc1-dt/arch/i386/Kconfig =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/Kconfig +++ linux-2.6.15-rc1-dt/arch/i386/Kconfig @@ -173,6 +173,22 @@ config HPET_EMULATE_RTC depends on HPET_TIMER && RTC=3Dy default y =20 +config NO_IDLE_HZ + bool "Dynamic Tick Timer - Skip timer ticks during idle" + depends on EXPERIMENTAL + select X86_PM_TIMER + help + This option enables support for skipping timer ticks when the + processor is idle. During system load, timer is continuous. + This option saves power, as it allows the system to stay in + idle mode longer. Currently the only supported timer is ACPI PM + timer. TSC and HPET timers are not supported. + + Note that you can disable dynamic tick timer either by + passing dyntick=3Ddisable command line option, or via sysfs: + + # echo 0 > /sys/devices/system/dyn_tick/dyn_tick0/enable + config SMP bool "Symmetric multi-processing support" ---help--- Index: linux-2.6.15-rc1-dt/arch/i386/defconfig =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/defconfig +++ linux-2.6.15-rc1-dt/arch/i386/defconfig @@ -91,6 +91,7 @@ CONFIG_X86_INTEL_USERCOPY=3Dy CONFIG_X86_USE_PPRO_CHECKSUM=3Dy # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set +# CONFIG_NO_IDLE_HZ is not set CONFIG_SMP=3Dy CONFIG_NR_CPUS=3D8 CONFIG_SCHED_SMT=3Dy Index: linux-2.6.15-rc1-dt/arch/i386/kernel/Makefile =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/Makefile +++ linux-2.6.15-rc1-dt/arch/i386/kernel/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_MODULES) +=3D module.o obj-y +=3D sysenter.o vsyscall.o obj-$(CONFIG_ACPI_SRAT) +=3D srat.o obj-$(CONFIG_HPET_TIMER) +=3D time_hpet.o +obj-$(CONFIG_NO_IDLE_HZ) +=3D dyn-tick.o obj-$(CONFIG_EFI) +=3D efi.o efi_stub.o obj-$(CONFIG_EARLY_PRINTK) +=3D early_printk.o =20 Index: linux-2.6.15-rc1-dt/arch/i386/kernel/apic.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/apic.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/apic.c @@ -26,6 +26,7 @@ #include #include #include +#include =20 #include #include @@ -932,6 +933,9 @@ void (*wait_timer_tick)(void) __devinitd =20 #define APIC_DIVISOR 16 =20 +static u32 apic_timer_val; +#define APIC_TIMER_VAL ((apic_timer_val) / (HZ)) + static void __setup_APIC_LVTT(unsigned int clocks) { unsigned int lvtt_value, tmp_value, ver; @@ -950,7 +954,9 @@ static void __setup_APIC_LVTT(unsigned i & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | APIC_TDR_DIV_16); =20 =2D apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); + apic_timer_val =3D clocks * HZ / APIC_DIVISOR; + + apic_write_around(APIC_TMICT, APIC_TIMER_VAL); } =20 static void __devinit setup_APIC_timer(unsigned int clocks) @@ -969,6 +975,17 @@ static void __devinit setup_APIC_timer(u local_irq_restore(flags); } =20 +/* Used by NO_IDLE_HZ to skip ticks on idle CPUs */ +void reprogram_apic_timer(unsigned long count) +{ + unsigned long flags; + + count =3D count * apic_timer_val / HZ; + local_irq_save(flags); + apic_write_around(APIC_TMICT, count); + local_irq_restore(flags); +} + /* * In this function we calibrate APIC bus clocks to the external * timer. Unfortunately we cannot use jiffies and the timer irq @@ -1064,6 +1081,9 @@ void __init setup_boot_APIC_clock(void) */ setup_APIC_timer(calibration_result); =20 + setup_dyn_tick_use_apic(calibration_result); + set_dyn_tick_max_skip((0xFFFFFFFF / calibration_result) * APIC_DIVISOR); + local_irq_restore(flags); } =20 @@ -1202,6 +1222,9 @@ fastcall void smp_apic_timer_interrupt(s * interrupt lock, which is the WrongThing (tm) to do. */ irq_enter(); + + dyn_tick_interrupt(LOCAL_TIMER_VECTOR, regs); + smp_local_timer_interrupt(regs); irq_exit(); } @@ -1214,6 +1237,9 @@ fastcall void smp_spurious_interrupt(str unsigned long v; =20 irq_enter(); + + dyn_tick_interrupt(SPURIOUS_APIC_VECTOR, regs); + /* * Check if this really is a spurious interrupt and ACK it * if it is a vectored one. Just in case... @@ -1238,6 +1264,9 @@ fastcall void smp_error_interrupt(struct unsigned long v, v1; =20 irq_enter(); + + dyn_tick_interrupt(ERROR_APIC_VECTOR, regs); + /* First tickle the hardware, only then report what went on. -- REW */ v =3D apic_read(APIC_ESR); apic_write(APIC_ESR, 0); Index: linux-2.6.15-rc1-dt/arch/i386/kernel/dyn-tick.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- /dev/null +++ linux-2.6.15-rc1-dt/arch/i386/kernel/dyn-tick.c @@ -0,0 +1,154 @@ +/* + * linux/arch/i386/kernel/dyn-tick.c + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgen and + * Tuukka Tikkanen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline void reprogram_timer(unsigned long skip) +{ + if (cpu_has_local_apic()) + reprogram_apic_timer(skip); + else + reprogram_pit_timer(skip); +} + +static void arch_reprogram(unsigned long jif_next) +{ + unsigned long skip =3D jif_next - jiffies; + + reprogram_timer(skip); + /* Fixme: Disable NMI Watchdog */ +} + +static void arch_all_cpus_idle(int how_long) +{ + if (cpu_has_local_apic()) + disable_pit_timer(); +} + +static inline int arch_enable(void) +{ + return 0; +} + +static inline int arch_disable(void) +{ + return 0; +} + +static struct dyn_tick_timer arch_dyn_tick =3D { + .arch_reprogram =3D &arch_reprogram, + .arch_all_cpus_idle =3D &arch_all_cpus_idle, + .arch_enable =3D &arch_enable, + .arch_disable =3D &arch_disable, + .min_skip =3D DYN_TICK_MIN_SKIP, +}; + +struct dyn_tick_timer *dyn_tick =3D &arch_dyn_tick; +spinlock_t *dyn_tick_lock =3D &arch_dyn_tick.lock; + +int __init dyn_tick_arch_init(void) +{ + if (!cpu_has_local_apic()) + set_dyn_tick_max_skip(0xffff / LATCH); /* PIT timer length */ + + printk(KERN_INFO "dyn-tick: Maximum ticks to skip limited to %i\n", + arch_dyn_tick.max_skip); + + return 0; +} + +static int __init dyn_tick_init(void) +{ + arch_dyn_tick.arch_init =3D dyn_tick_arch_init; + dyn_tick_register(&arch_dyn_tick); + + return 0; +} + +arch_initcall(dyn_tick_init); + +/* Functions that need blank prototypes for !CONFIG_NO_IDLE_HZ below here = */ +void setup_dyn_tick_use_apic(unsigned int calibration_result) +{ + if (calibration_result) + arch_dyn_tick.state |=3D DYN_TICK_APICABLE; + else { + arch_dyn_tick.state &=3D ~DYN_TICK_APICABLE; + printk(KERN_INFO "dyn-tick: Cannot use local APIC\n"); + } +} + +void dyn_tick_interrupt(int irq, struct pt_regs *regs) +{ + int all_were_sleeping =3D 0; + int cpu =3D smp_processor_id(); + + if (!cpu_isset(cpu, nohz_cpu_mask)) + return; + + spin_lock(dyn_tick_lock); + + if (cpus_equal(nohz_cpu_mask, cpu_online_map)) + all_were_sleeping =3D 1; + cpu_clear(cpu, nohz_cpu_mask); + + if (all_were_sleeping) { + /* Recover jiffies */ + if (irq) { + int lost; + + lost =3D cur_timer->mark_offset(); + if (lost) + do_timer(regs); + } + if (cpu_has_local_apic()) + enable_pit_timer(); + } + + spin_unlock(dyn_tick_lock); + + reprogram_timer(1); + + conditional_run_local_timers(); + + /* Fixme: Enable NMI watchdog */ +} + + +void dyn_tick_time_init(struct timer_opts *cur_timer) +{ + spin_lock_init(dyn_tick_lock); + + if (strncmp(cur_timer->name, "pmtmr", 3) =3D=3D 0) { + arch_dyn_tick.state |=3D DYN_TICK_SUITABLE; + printk(KERN_INFO "dyn-tick: Found suitable timer: %s\n", + cur_timer->name); + } else + printk(KERN_ERR "dyn-tick: Cannot use timer %s\n", + cur_timer->name); +} + +void idle_reprogram_timer(void) +{ + local_irq_disable(); + if (!need_resched()) + timer_dyn_reprogram(); + local_irq_enable(); +} Index: linux-2.6.15-rc1-dt/arch/i386/kernel/io_apic.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/io_apic.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/io_apic.c @@ -32,6 +32,7 @@ #include #include #include +#include =20 #include #include @@ -1190,15 +1191,19 @@ static inline void ioapic_register_intr( if ((trigger =3D=3D IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || trigger =3D=3D IOAPIC_LEVEL) irq_desc[vector].handler =3D &ioapic_level_type; =2D else + else if (vector) irq_desc[vector].handler =3D &ioapic_edge_type; + else + irq_desc[vector].handler =3D IOAPIC_EDGE_TYPE_IRQ0; set_intr_gate(vector, interrupt[vector]); } else { if ((trigger =3D=3D IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || trigger =3D=3D IOAPIC_LEVEL) irq_desc[irq].handler =3D &ioapic_level_type; =2D else + else if (irq) irq_desc[irq].handler =3D &ioapic_edge_type; + else + irq_desc[irq].handler =3D IOAPIC_EDGE_TYPE_IRQ0; set_intr_gate(vector, interrupt[irq]); } } @@ -1311,7 +1316,7 @@ static void __init setup_ExtINT_IRQ0_pin * The timer IRQ doesn't have to know that behind the * scene we have a 8259A-master in AEOI mode ... */ =2D irq_desc[0].handler =3D &ioapic_edge_type; + irq_desc[0].handler =3D IOAPIC_EDGE_TYPE_IRQ0; =20 /* * Add it to the IO-APIC irq-routing table: @@ -2088,6 +2093,20 @@ static struct hw_interrupt_type ioapic_l #endif }; =20 +/* Needed to disable PIT interrupts when all CPUs sleep */ +struct hw_interrupt_type ioapic_edge_type_irq0 =3D { + .typename =3D "IO-APIC-edge-irq0", + .startup =3D startup_edge_ioapic, + .shutdown =3D shutdown_edge_ioapic, + .enable =3D unmask_IO_APIC_irq, + .disable =3D mask_IO_APIC_irq, + .ack =3D ack_edge_ioapic, + .end =3D end_edge_ioapic, +#ifdef CONFIG_SMP + .set_affinity =3D set_ioapic_affinity, +#endif +}; + static inline void init_IO_APIC_traps(void) { int irq; Index: linux-2.6.15-rc1-dt/arch/i386/kernel/irq.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/irq.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/irq.c @@ -18,6 +18,7 @@ #include #include #include +#include =20 DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_maxaligned_in_smp; EXPORT_PER_CPU_SYMBOL(irq_stat); @@ -76,6 +77,8 @@ fastcall unsigned int do_IRQ(struct pt_r } #endif =20 + dyn_tick_interrupt(irq, regs); + #ifdef CONFIG_4KSTACKS =20 curctx =3D (union irq_ctx *) current_thread_info(); Index: linux-2.6.15-rc1-dt/arch/i386/kernel/process.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/process.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/process.c @@ -39,6 +39,7 @@ #include #include #include +#include =20 #include #include @@ -193,6 +194,8 @@ void cpu_idle(void) if (cpu_is_offline(cpu)) play_dead(); =20 + idle_reprogram_timer(); + __get_cpu_var(irq_stat).idle_timestamp =3D jiffies; idle(); } Index: linux-2.6.15-rc1-dt/arch/i386/kernel/smp.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/smp.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/smp.c @@ -20,6 +20,7 @@ #include #include #include +#include =20 #include #include @@ -313,6 +314,8 @@ fastcall void smp_invalidate_interrupt(s { unsigned long cpu; =20 + dyn_tick_interrupt(INVALIDATE_TLB_VECTOR, regs); + cpu =3D get_cpu(); =20 if (!cpu_isset(cpu, flush_cpumask)) @@ -600,6 +603,8 @@ void smp_send_stop(void) fastcall void smp_reschedule_interrupt(struct pt_regs *regs) { ack_APIC_irq(); + + dyn_tick_interrupt(RESCHEDULE_VECTOR, regs); } =20 fastcall void smp_call_function_interrupt(struct pt_regs *regs) @@ -609,6 +614,9 @@ fastcall void smp_call_function_interrup int wait =3D call_data->wait; =20 ack_APIC_irq(); + + dyn_tick_interrupt(CALL_FUNCTION_VECTOR, regs); + /* * Notify initiating CPU that I've grabbed the data and am * about to execute the function Index: linux-2.6.15-rc1-dt/arch/i386/kernel/time.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/time.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/time.c @@ -46,6 +46,7 @@ #include #include #include +#include =20 #include #include @@ -245,7 +246,7 @@ EXPORT_SYMBOL(profile_pc); * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ =2Dstatic inline void do_timer_interrupt(int irq, struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs, int l= ost) { #ifdef CONFIG_X86_IO_APIC if (timer_ack) { @@ -263,7 +264,8 @@ static inline void do_timer_interrupt(in } #endif =20 =2D do_timer_interrupt_hook(regs); + if (!dyn_tick_enabled() || lost) + do_timer_interrupt_hook(regs); =20 =20 if (MCA_bus) { @@ -288,6 +290,8 @@ static inline void do_timer_interrupt(in */ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { + int lost; + /* * Here we are in the timer irq handler. We just have irqs locally * disabled but we don't know if the timer_bh is running on the other @@ -297,9 +301,9 @@ irqreturn_t timer_interrupt(int irq, voi */ write_seqlock(&xtime_lock); =20 =2D cur_timer->mark_offset(); =2D=20 =2D do_timer_interrupt(irq, regs); + lost =3D cur_timer->mark_offset(); + + do_timer_interrupt(irq, regs, lost); =20 write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -425,7 +429,7 @@ static struct sysdev_class timer_sysclas =20 =20 /* XXX this driverfs stuff should probably go elsewhere later -john */ =2Dstatic struct sys_device device_timer =3D { +struct sys_device device_timer =3D { .id =3D 0, .cls =3D &timer_sysclass, }; @@ -481,5 +485,7 @@ void __init time_init(void) cur_timer =3D select_timer(); printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); =20 + dyn_tick_time_init(cur_timer); + time_init_hook(); } Index: linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_pit.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/timers/timer_pit.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_pit.c @@ -31,9 +31,10 @@ static int __init init_pit(char* overrid return 0; } =20 =2Dstatic void mark_offset_pit(void) +static int mark_offset_pit(void) { /* nothing needed */ + return 1; } =20 static unsigned long long monotonic_clock_pit(void) @@ -147,6 +148,38 @@ static unsigned long get_offset_pit(void return count; } =20 +void disable_pit_timer(void) +{ + irq_desc[0].handler->disable(0); +} + +void enable_pit_timer(void) +{ + irq_desc[0].handler->enable(0); +} + +/* + * Reprograms the next timer interrupt + * PIT timer reprogramming code taken from APM code. + * Note that PIT timer is a 16-bit timer, which allows max + * skip of only few seconds. + */ +void reprogram_pit_timer(unsigned long jiffies_to_skip) +{ + int skip; + extern spinlock_t i8253_lock; + unsigned long flags; + + skip =3D jiffies_to_skip * LATCH; + if (skip > 0xffff) + skip =3D 0xffff; + + spin_lock_irqsave(&i8253_lock, flags); + outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(skip & 0xff, PIT_CH0); /* LSB */ + outb(skip >> 8, PIT_CH0); /* MSB */ + spin_unlock_irqrestore(&i8253_lock, flags); +} =20 /* tsc timer_opts struct */ struct timer_opts timer_pit =3D { Index: linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_pm.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/timers/timer_pm.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_pm.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -28,7 +29,7 @@ #define PMTMR_TICKS_PER_SEC 3579545 #define PMTMR_EXPECTED_RATE \ ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10)) =2D +#define PMTMR_TICKS_PER_JIFFY (PMTMR_EXPECTED_RATE / (CALIBRATE_LATCH/LATC= H)) =20 /* The I/O port the PMTMR resides at. * The location is detected during setup_arch(), @@ -127,7 +128,13 @@ pm_good: if (verify_pmtmr_rate() !=3D 0) return -ENODEV; =20 + printk("Using %u PM timer ticks per jiffy \n", PMTMR_TICKS_PER_JIFFY); + + offset_tick =3D read_pmtmr(); + setup_pit_timer(); + init_cpu_khz(); + set_dyn_tick_max_skip(((0xFFFFFF / 1000000) * 286 * HZ) >> 10); return 0; } =20 @@ -148,10 +155,9 @@ static inline u32 cyc2us(u32 cycles) * this gets called during each timer interrupt * - Called while holding the writer xtime_lock */ =2Dstatic void mark_offset_pmtmr(void) +static int mark_offset_pmtmr(void) { u32 lost, delta, last_offset; =2D static int first_run =3D 1; last_offset =3D offset_tick; =20 write_seqlock(&monotonic_lock); @@ -161,29 +167,20 @@ static void mark_offset_pmtmr(void) /* calculate tick interval */ delta =3D (offset_tick - last_offset) & ACPI_PM_MASK; =20 =2D /* convert to usecs */ =2D delta =3D cyc2us(delta); =2D /* update the monotonic base value */ =2D monotonic_base +=3D delta * NSEC_PER_USEC; + monotonic_base +=3D cyc2us(delta) * NSEC_PER_USEC; write_sequnlock(&monotonic_lock); =20 /* convert to ticks */ delta +=3D offset_delay; =2D lost =3D delta / (USEC_PER_SEC / HZ); =2D offset_delay =3D delta % (USEC_PER_SEC / HZ); =2D + lost =3D delta / PMTMR_TICKS_PER_JIFFY; + offset_delay =3D delta % PMTMR_TICKS_PER_JIFFY; =20 /* compensate for lost ticks */ if (lost >=3D 2) jiffies_64 +=3D lost - 1; =20 =2D /* don't calculate delay for first run, =2D or if we've got less then a tick */ =2D if (first_run || (lost < 1)) { =2D first_run =3D 0; =2D offset_delay =3D 0; =2D } + return lost; } =20 static int pmtmr_resume(void) @@ -192,6 +189,7 @@ static int pmtmr_resume(void) /* Assume this is the last mark offset time */ offset_tick =3D read_pmtmr(); write_sequnlock(&monotonic_lock); + offset_delay =3D 0; return 0; } =20 @@ -243,7 +241,7 @@ static unsigned long get_offset_pmtmr(vo now =3D read_pmtmr(); delta =3D (now - offset)&ACPI_PM_MASK; =20 =2D return (unsigned long) offset_delay + cyc2us(delta); + return (unsigned long) cyc2us(delta + offset_delay); } =20 =20 Index: linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_tsc.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/timers/timer_tsc.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_tsc.c @@ -14,6 +14,7 @@ #include #include #include +#include =20 #include #include @@ -32,8 +33,6 @@ static unsigned long hpet_last; static struct timer_opts timer_tsc; #endif =20 =2Dstatic inline void cpufreq_delayed_get(void); =2D int tsc_disable __devinitdata =3D 0; =20 static int use_tsc; @@ -171,10 +170,19 @@ static void delay_tsc(unsigned long loop } while ((now-bclock) < loops); } =20 +/* update the monotonic base value */ +static inline void update_monotonic_base(unsigned long long last_offset) +{ + unsigned long long this_offset; + + this_offset =3D ((unsigned long long)last_tsc_high << 32) | last_tsc_low; + monotonic_base +=3D cycles_2_ns(this_offset - last_offset); +} + #ifdef CONFIG_HPET_TIMER =2Dstatic void mark_offset_tsc_hpet(void) +static int mark_offset_tsc_hpet(void) { =2D unsigned long long this_offset, last_offset; + unsigned long long last_offset; unsigned long offset, temp, hpet_current; =20 write_seqlock(&monotonic_lock); @@ -202,9 +210,7 @@ static void mark_offset_tsc_hpet(void) } hpet_last =3D hpet_current; =20 =2D /* update the monotonic base value */ =2D this_offset =3D ((unsigned long long)last_tsc_high<<32)|last_tsc_low; =2D monotonic_base +=3D cycles_2_ns(this_offset - last_offset); + update_monotonic_base(last_offset); write_sequnlock(&monotonic_lock); =20 /* calculate delay_at_last_interrupt */ @@ -218,6 +224,8 @@ static void mark_offset_tsc_hpet(void) delay_at_last_interrupt =3D hpet_current - offset; ASM_MUL64_REG(temp, delay_at_last_interrupt, hpet_usec_quotient, delay_at_last_interrupt); + + return 1; } #endif =20 @@ -242,7 +250,7 @@ static void handle_cpufreq_delayed_get(v * to verify the CPU frequency the timing core thinks the CPU is running * at is still correct. */ =2Dstatic inline void cpufreq_delayed_get(void)=20 +void cpufreq_delayed_get(void) { if (cpufreq_init && !cpufreq_delayed_issched) { cpufreq_delayed_issched =3D 1; @@ -321,7 +329,7 @@ static int __init cpufreq_tsc(void) core_initcall(cpufreq_tsc); =20 #else /* CONFIG_CPU_FREQ */ =2Dstatic inline void cpufreq_delayed_get(void) { return; } +void cpufreq_delayed_get(void) { return; } #endif=20 =20 int recalibrate_cpu_khz(void) @@ -344,15 +352,15 @@ int recalibrate_cpu_khz(void) } EXPORT_SYMBOL(recalibrate_cpu_khz); =20 =2Dstatic void mark_offset_tsc(void) +static int mark_offset_tsc(void) { unsigned long lost,delay; unsigned long delta =3D last_tsc_low; int count; int countmp; static int count1 =3D 0; =2D unsigned long long this_offset, last_offset; =2D static int lost_count =3D 0; + unsigned long long last_offset; + int lost_count =3D 0; =20 write_seqlock(&monotonic_lock); last_offset =3D ((unsigned long long)last_tsc_high<<32)|last_tsc_low; @@ -422,26 +430,11 @@ static void mark_offset_tsc(void) if (lost >=3D 2) { jiffies_64 +=3D lost-1; =20 =2D /* sanity check to ensure we're not always losing ticks */ =2D if (lost_count++ > 100) { =2D printk(KERN_WARNING "Losing too many ticks!\n"); =2D printk(KERN_WARNING "TSC cannot be used as a timesource. \n"); =2D printk(KERN_WARNING "Possible reasons for this are:\n"); =2D printk(KERN_WARNING " You're running with Speedstep,\n"); =2D printk(KERN_WARNING " You don't have DMA enabled for your hard disk = (see hdparm),\n"); =2D printk(KERN_WARNING " Incorrect TSC synchronization on an SMP system= (see dmesg).\n"); =2D printk(KERN_WARNING "Falling back to a sane timesource now.\n"); =2D =2D clock_fallback(); =2D } =2D /* ... but give the TSC a fair chance */ =2D if (lost_count > 25) =2D cpufreq_delayed_get(); + tsc_sanity_check(&lost_count); } else lost_count =3D 0; =2D /* update the monotonic base value */ =2D this_offset =3D ((unsigned long long)last_tsc_high<<32)|last_tsc_low; =2D monotonic_base +=3D cycles_2_ns(this_offset - last_offset); + + update_monotonic_base(last_offset); write_sequnlock(&monotonic_lock); =20 /* calculate delay_at_last_interrupt */ @@ -452,8 +445,12 @@ static void mark_offset_tsc(void) * between tsc and pit reads (as noted when * usec delta is > 90% # of usecs/tick) */ =2D if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ)) + if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ)) { jiffies_64++; + lost++; + } + + return 1; } =20 static int __init init_tsc(char* override) @@ -542,6 +539,8 @@ static int __init init_tsc(char* overrid cpu_khz / 1000, cpu_khz % 1000); } set_cyc2ns_scale(cpu_khz); + set_dyn_tick_max_skip((0xFFFFFFFF / + (cpu_khz * 1000)) * HZ); return 0; } } Index: linux-2.6.15-rc1-dt/drivers/acpi/Kconfig =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/drivers/acpi/Kconfig +++ linux-2.6.15-rc1-dt/drivers/acpi/Kconfig @@ -302,6 +302,8 @@ config X86_PM_TIMER voltage scaling, unlike the commonly used Time Stamp Counter (TSC) timing source. =20 + This timer is selected by dyntick (NO_IDLE_HZ). + So, if you see messages like 'Losing too many ticks!' in the kernel logs, and/or you are using this on a notebook which does not yet have an HPET, you should say "Y" here. Index: linux-2.6.15-rc1-dt/include/asm-i386/apic.h =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/include/asm-i386/apic.h +++ linux-2.6.15-rc1-dt/include/asm-i386/apic.h @@ -121,6 +121,7 @@ extern void nmi_watchdog_tick (struct pt extern int APIC_init_uniprocessor (void); extern void disable_APIC_timer(void); extern void enable_APIC_timer(void); +extern void reprogram_apic_timer(unsigned long count); =20 extern void enable_NMI_through_LVT0 (void * dummy); =20 @@ -134,6 +135,7 @@ extern int disable_timer_pin_1; =20 #else /* !CONFIG_X86_LOCAL_APIC */ static inline void lapic_shutdown(void) { } +static inline void reprogram_apic_timer(unsigned long count) { } =20 #endif /* !CONFIG_X86_LOCAL_APIC */ =20 Index: linux-2.6.15-rc1-dt/include/asm-i386/dyn-tick.h =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- /dev/null +++ linux-2.6.15-rc1-dt/include/asm-i386/dyn-tick.h @@ -0,0 +1,96 @@ +/* + * linux/include/asm-i386/dyn-tick.h + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgen and + * Tuukka Tikkanen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_I386_DYN_TICK_H_ +#define _ASM_I386_DYN_TICK_H_ + +#include +#include + +extern void cpufreq_delayed_get(void); + +#ifdef CONFIG_NO_IDLE_HZ +extern void setup_dyn_tick_use_apic(unsigned int calibration_result); +extern void dyn_tick_interrupt(int irq, struct pt_regs *regs); +extern void dyn_tick_time_init(struct timer_opts *cur_timer); + +/* + * Needs to be different to the arch independant values specified in + * include/linux/dyn-tick.h to share the dyn_tick_timer.state struct + * member. + */ +#define DYN_TICK_APICABLE (1 << 3) + +#if (defined(CONFIG_SMP) || defined(CONFIG_X86_UP_APIC)) +static inline int cpu_has_local_apic(void) +{ + return (dyn_tick->state & DYN_TICK_APICABLE); +} + +#else /* (defined(CONFIG_SMP) || defined(CONFIG_X86_UP_APIC)) */ +static inline int cpu_has_local_apic(void) +{ + return 0; +} +#endif /* (defined(CONFIG_SMP) || defined(CONFIG_X86_UP_APIC)) */ + +#define IOAPIC_EDGE_TYPE_IRQ0 (&(ioapic_edge_type_irq0)) + +extern struct hw_interrupt_type ioapic_edge_type_irq0; + +extern void idle_reprogram_timer(void); + +static inline void tsc_sanity_check(int *lost_count) +{ +} + +#else /* CONFIG_NO_IDLE_HZ */ + +#define IOAPIC_EDGE_TYPE_IRQ0 (&(ioapic_edge_type)) + +static inline void setup_dyn_tick_use_apic(unsigned int calibration_result) +{ +} + +static inline void dyn_tick_interrupt(int irq, struct pt_regs *regs) +{ +} + +static inline void dyn_tick_time_init(struct timer_opts *cur_timer) +{ +} + +static inline void idle_reprogram_timer(void) +{ +} + +static inline void tsc_sanity_check(int *lost_count) +{ + /* sanity check to ensure we're not always losing ticks */ + if ((*lost_count)++ > 100) { + printk(KERN_WARNING "Losing too many ticks!\n"); + printk(KERN_WARNING "TSC cannot be used as a timesource. \n"); + printk(KERN_WARNING "Possible reasons for this are:\n"); + printk(KERN_WARNING " You're running with Speedstep,\n"); + printk(KERN_WARNING " You don't have DMA enabled for your hard disk (se= e hdparm),\n"); + printk(KERN_WARNING " Incorrect TSC synchronization on an SMP system (s= ee dmesg).\n"); + printk(KERN_WARNING "Falling back to a sane timesource now.\n"); + + clock_fallback(); + } + /* ... but give the TSC a fair chance */ + if (*lost_count > 25) + cpufreq_delayed_get(); +} +#endif /* CONFIG_NO_IDLE_HZ */ + +#endif /* _ASM_I386_DYN_TICK_H_ */ Index: linux-2.6.15-rc1-dt/include/asm-i386/timer.h =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/include/asm-i386/timer.h +++ linux-2.6.15-rc1-dt/include/asm-i386/timer.h @@ -19,7 +19,7 @@ */ struct timer_opts { char* name; =2D void (*mark_offset)(void); + int (*mark_offset)(void); unsigned long (*get_offset)(void); unsigned long long (*monotonic_clock)(void); void (*delay)(unsigned long); @@ -38,6 +38,9 @@ struct init_timer_opts { extern struct timer_opts* __init select_timer(void); extern void clock_fallback(void); void setup_pit_timer(void); +extern void disable_pit_timer(void); +extern void enable_pit_timer(void); +extern void reprogram_pit_timer(unsigned long jiffies_to_skip); =20 /* Modifiers for buggy PIT handling */ =20 Index: linux-2.6.15-rc1-dt/include/linux/dyn-tick.h =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- /dev/null +++ linux-2.6.15-rc1-dt/include/linux/dyn-tick.h @@ -0,0 +1,64 @@ +/* + * linux/include/linux/dyn-tick.h + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgen and + * Tuukka Tikkanen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DYN_TICK_TIMER_H +#define _DYN_TICK_TIMER_H + +#include +#include + +#define DYN_TICK_SKIPPING (1 << 2) +#define DYN_TICK_ENABLED (1 << 1) +#define DYN_TICK_SUITABLE (1 << 0) + +#define DYN_TICK_MIN_SKIP 2 + +struct dyn_tick_timer { + spinlock_t lock; + + int (*arch_init) (void); /* dyn_tick init */ + int (*arch_enable)(void); /* Enables dynamic tick */ + int (*arch_disable)(void); /* Disables dynamic tick */ + void (*arch_reprogram)(unsigned long); /* Reprograms the timer */ + int (*arch_handler)(int, void *, struct pt_regs *); + void (*arch_all_cpus_idle) (int); + + unsigned short state; /* Current state */ + unsigned int min_skip; /* Max number of ticks to skip */ + unsigned int max_skip; /* Max number of ticks to skip */ +}; + +extern struct dyn_tick_timer *dyn_tick; +extern spinlock_t *dyn_tick_lock; + +extern void dyn_tick_register(struct dyn_tick_timer *new_timer); + +#ifdef CONFIG_NO_IDLE_HZ +extern int dyn_tick_enabled(void); +extern void timer_dyn_reprogram(void); +extern void set_dyn_tick_max_skip(unsigned int max_skip); + +#else /* CONFIG_NO_IDLE_HZ */ +static inline int dyn_tick_enabled(void) +{ + return 0; +} + +static inline void set_dyn_tick_max_skip(unsigned int max_skip) +{ +} +#endif /* CONFIG_NO_IDLE_HZ */ + +/* Pick up arch specific header */ +#include + +#endif /* _DYN_TICK_TIMER_H */ Index: linux-2.6.15-rc1-dt/include/linux/timer.h =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/include/linux/timer.h +++ linux-2.6.15-rc1-dt/include/linux/timer.h @@ -97,5 +97,6 @@ static inline void add_timer(struct time extern void init_timers(void); extern void run_local_timers(void); extern void it_real_fn(unsigned long); +extern void conditional_run_local_timers(void); =20 #endif Index: linux-2.6.15-rc1-dt/kernel/dyn-tick.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- /dev/null +++ linux-2.6.15-rc1-dt/kernel/dyn-tick.c @@ -0,0 +1,190 @@ +/* + * linux/kernel/dyn-tick.c + * + * Beginnings of generic dynamic tick timer support + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgen and + * Tuukka Tikkanen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DYN_TICK_VERSION "051118-1" + +int dyn_tick_enabled(void) +{ + return (dyn_tick->state & DYN_TICK_ENABLED); +} + +static inline int dyn_tick_suitable(void) +{ + return (dyn_tick->state & DYN_TICK_SUITABLE); +} + +/* + * Arch independent code needed to reprogram next timer interrupt. + * Gets called, with IRQs disabled, from cpu_idle() before entering idle l= oop. + */ +void timer_dyn_reprogram(void) +{ + int cpu =3D smp_processor_id(); + unsigned int delta; + + if (!dyn_tick_enabled()) + return; + + if (rcu_pending(cpu) || local_softirq_pending()) + return; + + /* Check if we can start skipping ticks */ + write_seqlock(&xtime_lock); + + delta =3D next_timer_interrupt() - jiffies; + if (delta > dyn_tick->max_skip) + delta =3D dyn_tick->max_skip; + + if (delta > dyn_tick->min_skip) { + int idle_time =3D 0; + + spin_lock(dyn_tick_lock); + + dyn_tick->arch_reprogram(jiffies + delta); + + cpu_set(cpu, nohz_cpu_mask); + if (cpus_equal(nohz_cpu_mask, cpu_online_map)) + /* Fixme: idle_time needs to be computed */ + dyn_tick->arch_all_cpus_idle(idle_time); + + spin_unlock(dyn_tick_lock); + } + + write_sequnlock(&xtime_lock); +} + +void set_dyn_tick_max_skip(unsigned int max_skip) +{ + if (!dyn_tick->max_skip || max_skip < dyn_tick->max_skip) + dyn_tick->max_skip =3D max_skip; +} + +void __init dyn_tick_register(struct dyn_tick_timer *arch_timer) +{ + dyn_tick =3D arch_timer; + printk(KERN_INFO "dyn-tick: Registering dynamic tick timer v%s\n", + DYN_TICK_VERSION); +} + +/* Default to enabled */ +static int __initdata dyntick_autoenable =3D 1; + +/* + * Command line options. + * + * dyntick=3D[enable|disable] + */ +static int __init dyntick_setup(char *options) +{ + if (!options) + return 0; + + if (!strncmp(options, "enable", 5)) + dyntick_autoenable =3D 1; + if (!strncmp(options, "disable", 6)) + dyntick_autoenable =3D 0; + + return 0; +} + +__setup("dyntick=3D", dyntick_setup); + +/* + * Sysfs interface. + * + * Usually situated at: + * /sys/devices/system/timer/timer0/dyn_tick + */ +extern struct sys_device device_timer; + +static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%i\n", dyn_tick_enabled()); +} + +static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned long flags; + unsigned int enable =3D simple_strtoul(buf, NULL, 2); + int ret =3D -ENODEV; + + write_seqlock_irqsave(&xtime_lock, flags); + if (enable) { + ret =3D dyn_tick->arch_enable(); + if (ret =3D=3D 0) + dyn_tick->state |=3D DYN_TICK_ENABLED; + } else { + ret =3D dyn_tick->arch_disable(); + if (ret =3D=3D 0) + dyn_tick->state &=3D ~DYN_TICK_ENABLED; + } + write_sequnlock_irqrestore(&xtime_lock, flags); + + return count; +} + +static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick= ); + +static int __init init_dyn_tick_sysfs(void) +{ + int ret =3D sysdev_create_file(&device_timer, &attr_dyn_tick); + + return ret; +} + +device_initcall(init_dyn_tick_sysfs); + +/* + * Init functions + * + * We need to initialize dynamic tick after calibrate delay + */ +static int __init dyn_tick_late_init(void) +{ + int ret =3D 0; + + if (dyn_tick =3D=3D NULL || dyn_tick->arch_init =3D=3D NULL || + !dyn_tick_suitable()) { + printk(KERN_ERR "dyn-tick: No suitable timer found\n"); + return -ENODEV; + } + + if ((ret =3D dyn_tick->arch_init())) { + printk(KERN_ERR "dyn-tick: Init failed\n"); + return -ENODEV; + } + + if (!ret && dyntick_autoenable) { + dyn_tick->state |=3D DYN_TICK_ENABLED; + printk(KERN_INFO "dyn-tick: Timer using dynamic tick\n"); + } else + printk(KERN_INFO "dyn-tick: Timer not enabled during boot\n"); + + return ret; +} + +late_initcall(dyn_tick_late_init); Index: linux-2.6.15-rc1-dt/kernel/timer.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/kernel/timer.c +++ linux-2.6.15-rc1-dt/kernel/timer.c @@ -869,6 +869,13 @@ void run_local_timers(void) raise_softirq(TIMER_SOFTIRQ); } =20 +void conditional_run_local_timers(void) +{ + tvec_base_t *base =3D &__get_cpu_var(tvec_bases); + + if (base->timer_jiffies !=3D jiffies) + run_local_timers(); +} /* * Called by the timer interrupt. xtime_lock must already be taken * by the timer IRQ! Index: linux-2.6.15-rc1-dt/kernel/Makefile =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/kernel/Makefile +++ linux-2.6.15-rc1-dt/kernel/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_GENERIC_HARDIRQS) +=3D irq/ obj-$(CONFIG_CRASH_DUMP) +=3D crash_dump.o obj-$(CONFIG_SECCOMP) +=3D seccomp.o obj-$(CONFIG_RCU_TORTURE_TEST) +=3D rcutorture.o +obj-$(CONFIG_NO_IDLE_HZ) +=3D dyn-tick.o =20 ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) # According to Alan Modra , the -fno-omit-frame-poi= nter is Index: linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_cyclone.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/timers/timer_cyclone.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_cyclone.c @@ -45,7 +45,7 @@ static seqlock_t monotonic_lock =3D SEQLOC } while (high !=3D cyclone_timer[1]); =20 =20 =2Dstatic void mark_offset_cyclone(void) +static int mark_offset_cyclone(void) { unsigned long lost, delay; unsigned long delta =3D last_cyclone_low; @@ -101,6 +101,8 @@ static void mark_offset_cyclone(void) */ if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ)) jiffies_64++; + + return 1; } =20 static unsigned long get_offset_cyclone(void) Index: linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_hpet.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/timers/timer_hpet.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_hpet.c @@ -101,7 +101,7 @@ static unsigned long get_offset_hpet(voi return edx; } =20 =2Dstatic void mark_offset_hpet(void) +static int mark_offset_hpet(void) { unsigned long long this_offset, last_offset; unsigned long offset; @@ -124,6 +124,8 @@ static void mark_offset_hpet(void) this_offset =3D ((unsigned long long)last_tsc_high<<32)|last_tsc_low; monotonic_base +=3D cycles_2_ns(this_offset - last_offset); write_sequnlock(&monotonic_lock); + + return 1; } =20 static void delay_hpet(unsigned long loops) Index: linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_none.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =2D-- linux-2.6.15-rc1-dt.orig/arch/i386/kernel/timers/timer_none.c +++ linux-2.6.15-rc1-dt/arch/i386/kernel/timers/timer_none.c @@ -1,9 +1,10 @@ #include #include =20 =2Dstatic void mark_offset_none(void) +static int mark_offset_none(void) { /* nothing needed */ + return 1; } =20 static unsigned long get_offset_none(void) --nextPart2093907.apOxxJK5Wd Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQBDgC2GZUg7+tp6mRURAgoKAKCQOWm0qz8LDNjKQGBTauq5fQ/RUQCeKDBM oY+lYR34ykYq9e5Jd53pMmc= =0Uh1 -----END PGP SIGNATURE----- --nextPart2093907.apOxxJK5Wd-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/