Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20190607102710.23800-1-enric.balletbo@collabora.com>
 <decdbdf5285d76b4dab5b8f337023631a96ffc15.camel@collabora.com> <CAHX4x84G-f=HabyWCqAGOEBZdBgobW0BTB0iUbZcXYxBh3XcaQ@mail.gmail.com>
In-Reply-To: <CAHX4x84G-f=HabyWCqAGOEBZdBgobW0BTB0iUbZcXYxBh3XcaQ@mail.gmail.com>
From:   Nick Crews <ncrews@chromium.org>
Date:   Fri, 7 Jun 2019 13:45:01 -0600
Message-ID: <CAHX4x86uGBi8Tfq-YeTt+jW+o6Q=oOkJbzxreU_TUc9g9XWk9Q@mail.gmail.com>
Subject: Re: [PATCH v2] platform/chrome: cros_ec_lpc: Choose Microchip EC at runtime
To:     Ezequiel Garcia <ezequiel@collabora.com>,
        Stefan Reinauer <reinauer@google.com>
Cc:     Enric Balletbo i Serra <enric.balletbo@collabora.com>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        Collabora Kernel ML <kernel@collabora.com>,
        Guenter Roeck <groeck@chromium.org>,
        Benson Leung <bleung@chromium.org>,
        Dmitry Torokhov <dtor@chromium.org>,
        Arnd Bergmann <arnd@arndb.de>,
        Thomas Gleixner <tglx@linutronix.de>,
        Duncan Laurie <dlaurie@google.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Wei Yongjun <weiyongjun1@huawei.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Actually adding Stefan Reinauer this time...

On Fri, Jun 7, 2019 at 1:26 PM Nick Crews <ncrews@chromium.org> wrote:
>
> Hi!
>
> On Fri, Jun 7, 2019 at 12:03 PM Ezequiel Garcia <ezequiel@collabora.com> wrote:
> >
> > On Fri, 2019-06-07 at 12:27 +0200, Enric Balletbo i Serra wrote:
> > > On many boards, communication between the kernel and the Embedded
> > > Controller happens over an LPC bus. In these cases, the kernel config
> > > CONFIG_CROS_EC_LPC is enabled. Some of these LPC boards contain a
> > > Microchip Embedded Controller (MEC) that is different from the regular
> > > EC. On these devices, the same LPC bus is used, but the protocol is
> > > a little different. In these cases, the CONFIG_CROS_EC_LPC_MEC kernel
> > > config is enabled. Currently, the kernel decides at compile-time whether
> > > or not to use the MEC variant, and, when that kernel option is selected
> > > it breaks the other boards. We would like a kind of runtime detection to
> > > avoid this.
> > >
> > > This patch adds that detection mechanism by probing the protocol at
> > > runtime, first we assume that a MEC variant is connected, and if the
> > > protocol fails it fallbacks to the regular EC. This adds a bit of
> > > overload because we try to read twice on those LPC boards that doesn't
> > > contain a MEC variant, but is a better solution than having to select the
> > > EC variant at compile-time.
> > >
> > > While here also fix the alignment in Kconfig file for this config option
> > > replacing the spaces by tabs.
> > >
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > > ---
> > > Hi,
> > >
> > > This is the second attempt to solve the issue to be able to select at
> > > runtime the CrOS MEC variant. My first thought was check for a device
> > > ID,
> > > the MEC1322 has a register that contains the device ID, however I am not
> > > sure if we can read that register from the host without modifying the
> > > firmware. Also, I am not sure if the MEC1322 is the only device used
> > > that supports that LPC protocol variant, so I ended with a more easy
> > > solution, check if the protocol fails or not. Some background on this
> > > issue can be found [1] and [2]
> > >
> > > The patch has been tested on:
> > >  - Acer Chromebook R11 (Cyan - MEC variant)
> > >  - Pixel Chromebook 2015 (Samus - non-MEC variant)
> > >  - Dell Chromebook 11 (Wolf - non-MEC variant)
> > >  - Toshiba Chromebook (Leon - non-MEC variant)
> > >
> > > Nick, could you test the patch for Wilco?
> > >
> > > Best regards,
> > >  Enric
> > >
> > > [1] https://bugs.chromium.org/p/chromium/issues/detail?id=932626
> > > [2] https://chromium-review.googlesource.com/c/chromiumos/overlays/chromiumos-overlay/+/1474254
> > >
> > > Changes in v2:
> > > - Remove global bool to indicate the kind of variant as suggested by Ezequiel.
> > > - Create an internal operations struct to allow different variants.
> > >
> > >  drivers/platform/chrome/Kconfig           | 29 +++------
> > >  drivers/platform/chrome/Makefile          |  3 +-
> > >  drivers/platform/chrome/cros_ec_lpc.c     | 76 ++++++++++++++++-------
> > >  drivers/platform/chrome/cros_ec_lpc_reg.c | 39 +++---------
> > >  drivers/platform/chrome/cros_ec_lpc_reg.h | 26 ++++++++
> > >  drivers/platform/chrome/wilco_ec/Kconfig  |  2 +-
> > >  6 files changed, 98 insertions(+), 77 deletions(-)
> > >
> > > diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> > > index 2826f7136f65..453e69733842 100644
> > > --- a/drivers/platform/chrome/Kconfig
> > > +++ b/drivers/platform/chrome/Kconfig
> > > @@ -83,28 +83,17 @@ config CROS_EC_SPI
> > >         'pre-amble' bytes before the response actually starts.
> > >
> > >  config CROS_EC_LPC
> > > -        tristate "ChromeOS Embedded Controller (LPC)"
> > > -        depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> > > -        help
> > > -          If you say Y here, you get support for talking to the ChromeOS EC
> > > -          over an LPC bus. This uses a simple byte-level protocol with a
> > > -          checksum. This is used for userspace access only. The kernel
> > > -          typically has its own communication methods.
> > > -
> > > -          To compile this driver as a module, choose M here: the
> > > -          module will be called cros_ec_lpc.
> > > -
> > > -config CROS_EC_LPC_MEC
> > > -     bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
> > > -     depends on CROS_EC_LPC
> > > -     default n
> > > +     tristate "ChromeOS Embedded Controller (LPC)"
> > > +     depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> > >       help
> > > -       If you say Y here, a variant LPC protocol for the Microchip EC
> > > -       will be used. Note that this variant is not backward compatible
> > > -       with non-Microchip ECs.
> > > +       If you say Y here, you get support for talking to the ChromeOS EC
> > > +       over an LPC bus, including the LPC Microchip EC (MEC) variant.
> > > +       This uses a simple byte-level protocol with a checksum. This is
> > > +       used for userspace access only. The kernel typically has its own
> > > +       communication methods.
> > >
> > > -       If you have a ChromeOS Embedded Controller Microchip EC variant
> > > -       choose Y here.
> > > +       To compile this driver as a module, choose M here: the
> > > +       module will be called cros_ec_lpcs.
> > >
> > >  config CROS_EC_PROTO
> > >          bool
> > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> > > index 1b2f1dcfcd5c..d6416411888f 100644
> > > --- a/drivers/platform/chrome/Makefile
> > > +++ b/drivers/platform/chrome/Makefile
> > > @@ -9,8 +9,7 @@ obj-$(CONFIG_CHROMEOS_TBMC)           += chromeos_tbmc.o
> > >  obj-$(CONFIG_CROS_EC_I2C)            += cros_ec_i2c.o
> > >  obj-$(CONFIG_CROS_EC_RPMSG)          += cros_ec_rpmsg.o
> > >  obj-$(CONFIG_CROS_EC_SPI)            += cros_ec_spi.o
> > > -cros_ec_lpcs-objs                    := cros_ec_lpc.o cros_ec_lpc_reg.o
> > > -cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC)       += cros_ec_lpc_mec.o
> > > +cros_ec_lpcs-objs                    := cros_ec_lpc.o cros_ec_lpc_reg.o cros_ec_lpc_mec.o
> > >  obj-$(CONFIG_CROS_EC_LPC)            += cros_ec_lpcs.o
> > >  obj-$(CONFIG_CROS_EC_PROTO)          += cros_ec_proto.o cros_ec_trace.o
> > >  obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o
> > > diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
> > > index c9c240fbe7c6..91cb4dd34764 100644
> > > --- a/drivers/platform/chrome/cros_ec_lpc.c
> > > +++ b/drivers/platform/chrome/cros_ec_lpc.c
> > > @@ -28,6 +28,22 @@
> > >  #define DRV_NAME "cros_ec_lpcs"
> > >  #define ACPI_DRV_NAME "GOOG0004"
> > >
> > > +/**
> > > + * struct lpc_ops - LPC driver methods
> > > + *
> > > + * @read: Read bytes from a given LPC-mapped address.
> > > + * @write: Write bytes to a given LPC-mapped address.
> > > + */
> > > +struct lpc_ops {
> > > +     u8      (*read)(unsigned int offset, unsigned int length, u8 *dest);
> > > +     u8      (*write)(unsigned int offset, unsigned int length, u8 *msg);
> > > +};
> > > +
> > > +static struct lpc_ops cros_ec_lpc_ops = {
> > > +     .read   = cros_ec_lpc_mec_read_bytes,
> > > +     .write  = cros_ec_lpc_mec_write_bytes,
> > > +};
> > > +
> >
> > While this is better than a global boolean, it's still not
> > per-device.
> >
> > I guess it's not an issue given you typically (always?)
> > have one cros-ec device per platform.
> >
> > However, I'm still wondering if it's not better to make it
> > per-device (as the bus is per-device?).
>
> Enric and I were discussing this. Up to this point, there has only been
> one EC device per platform, and I think this is a reasonable
> expectation to maintain. I'm adding Stefan Reinauer, the Chrome OS
> EC lead, for their thoughts. Stefan, we are discussing whether or not we
> need to support multiple communication protocols at the same time,
> for instance if a device had multiple ECs, each with a different protocol.
>
> If we really wanted to support multiple ECs, there would be some other
> work to do besides this one fix, since the memory addresses that
> we write to are hardcoded into the drivers. In order to support
> multiple devices,
> not only would we need to make the xfer algorithms per-device, but would
> also need to make the memory addresses per-device. I would love
> some feedback on this, but my initial thought would be to add a
> "void *xfer_protocol_data" field to struct cros_ec_device, alongside
> the two existing
> int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg);
> int (*pkt_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg);
> fields. Then, each different protocol (lpc, i2c, spi, rpmsg, ishtp;
> some of these
> are only in the Chromium tree as of now) would be able to use this
> field as needed,
> for example to store the I2C address or the is_MEC flag for each device.
>
> Thanks,
> Nick
>
> >
> > >  /* True if ACPI device is present */
> > >  static bool cros_ec_lpc_acpi_device_found;
> > >
> > > @@ -38,7 +54,7 @@ static int ec_response_timed_out(void)
> > >
> > >       usleep_range(200, 300);
> > >       do {
> > > -             if (!(cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_CMD, 1, &data) &
> > > +             if (!(cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_CMD, 1, &data) &
> > >                   EC_LPC_STATUS_BUSY_MASK))
> > >                       return 0;
> > >               usleep_range(100, 200);
> > > @@ -58,11 +74,11 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
> > >       ret = cros_ec_prepare_tx(ec, msg);
> > >
> > >       /* Write buffer */
> > > -     cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
> > > +     cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
> > >
> > >       /* Here we go */
> > >       sum = EC_COMMAND_PROTOCOL_3;
> > > -     cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > > +     cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > >
> > >       if (ec_response_timed_out()) {
> > >               dev_warn(ec->dev, "EC responsed timed out\n");
> > > @@ -71,15 +87,15 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
> > >       }
> > >
> > >       /* Check result */
> > > -     msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > > +     msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > >       ret = cros_ec_check_result(ec, msg);
> > >       if (ret)
> > >               goto done;
> > >
> > >       /* Read back response */
> > >       dout = (u8 *)&response;
> > > -     sum = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
> > > -                                  dout);
> > > +     sum = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
> > > +                                dout);
> > >
> > >       msg->result = response.result;
> > >
> > > @@ -92,9 +108,9 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
> > >       }
> > >
> > >       /* Read response and process checksum */
> > > -     sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET +
> > > -                                   sizeof(response), response.data_len,
> > > -                                   msg->data);
> > > +     sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET +
> > > +                                 sizeof(response), response.data_len,
> > > +                                 msg->data);
> > >
> > >       if (sum) {
> > >               dev_err(ec->dev,
> > > @@ -134,17 +150,17 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
> > >       sum = msg->command + args.flags + args.command_version + args.data_size;
> > >
> > >       /* Copy data and update checksum */
> > > -     sum += cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
> > > -                                    msg->data);
> > > +     sum += cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
> > > +                                  msg->data);
> > >
> > >       /* Finalize checksum and write args */
> > >       args.checksum = sum;
> > > -     cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
> > > -                             (u8 *)&args);
> > > +     cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
> > > +                           (u8 *)&args);
> > >
> > >       /* Here we go */
> > >       sum = msg->command;
> > > -     cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > > +     cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > >
> > >       if (ec_response_timed_out()) {
> > >               dev_warn(ec->dev, "EC responsed timed out\n");
> > > @@ -153,14 +169,13 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
> > >       }
> > >
> > >       /* Check result */
> > > -     msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > > +     msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > >       ret = cros_ec_check_result(ec, msg);
> > >       if (ret)
> > >               goto done;
> > >
> > >       /* Read back args */
> > > -     cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
> > > -                            (u8 *)&args);
> > > +     cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_ARGS, sizeof(args), (u8 *)&args);
> > >
> > >       if (args.data_size > msg->insize) {
> > >               dev_err(ec->dev,
> > > @@ -174,8 +189,8 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
> > >       sum = msg->command + args.flags + args.command_version + args.data_size;
> > >
> > >       /* Read response and update checksum */
> > > -     sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PARAM, args.data_size,
> > > -                                   msg->data);
> > > +     sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PARAM, args.data_size,
> > > +                                 msg->data);
> > >
> > >       /* Verify checksum */
> > >       if (args.checksum != sum) {
> > > @@ -205,13 +220,13 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,
> > >
> > >       /* fixed length */
> > >       if (bytes) {
> > > -             cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
> > > +             cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
> > >               return bytes;
> > >       }
> > >
> > >       /* string */
> > >       for (; i < EC_MEMMAP_SIZE; i++, s++) {
> > > -             cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + i, 1, s);
> > > +             cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + i, 1, s);
> > >               cnt++;
> > >               if (!*s)
> > >                       break;
> > > @@ -248,10 +263,23 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
> > >               return -EBUSY;
> > >       }
> > >
> > > -     cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
> > > +     /*
> > > +      * Read the mapped ID twice, the first one is assuming the
> > > +      * EC is a Microchip Embedded Controller (MEC) variant, if the
> > > +      * protocol fails, fallback to the non MEC variant and try to
> > > +      * read again the ID.
> > > +      */
> > > +     cros_ec_lpc_mec_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
> > >       if (buf[0] != 'E' || buf[1] != 'C') {
> > > -             dev_err(dev, "EC ID not detected\n");
> > > -             return -ENODEV;
> > > +             cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2,
> > > +                                    buf);
> > > +             if (buf[0] != 'E' || buf[1] != 'C') {
> > > +                     dev_err(dev, "EC ID not detected\n");
> > > +                     return -ENODEV;
> > > +             }
> > > +             /* Re-assign read/write operations for the non MEC variant */
> > > +             cros_ec_lpc_ops.read = cros_ec_lpc_read_bytes;
> > > +             cros_ec_lpc_ops.write = cros_ec_lpc_write_bytes;
> > >       }
> > >
> > >       if (!devm_request_region(dev, EC_HOST_CMD_REGION0,
> > > diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
> > > index 0f5cd0ac8b49..389d3329616f 100644
> > > --- a/drivers/platform/chrome/cros_ec_lpc_reg.c
> > > +++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
> > > @@ -9,7 +9,7 @@
> > >
> > >  #include "cros_ec_lpc_mec.h"
> > >
> > > -static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > +u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > >  {
> > >       int i;
> > >       int sum = 0;
> > > @@ -23,7 +23,7 @@ static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > >       return sum;
> > >  }
> > >
> > > -static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > +u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > >  {
> > >       int i;
> > >       int sum = 0;
> > > @@ -37,9 +37,8 @@ static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > >       return sum;
> > >  }
> > >
> > > -#ifdef CONFIG_CROS_EC_LPC_MEC
> > > -
> > > -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > +u8 cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length,
> > > +                           u8 *dest)
> > >  {
> > >       int in_range = cros_ec_lpc_mec_in_range(offset, length);
> > >
> > > @@ -50,10 +49,12 @@ u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > >               cros_ec_lpc_io_bytes_mec(MEC_IO_READ,
> > >                                        offset - EC_HOST_CMD_REGION0,
> > >                                        length, dest) :
> > > -             lpc_read_bytes(offset, length, dest);
> > > +             cros_ec_lpc_read_bytes(offset, length, dest);
> > > +
> > >  }
> > >
> > > -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > +u8 cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length,
> > > +                            u8 *msg)
> > >  {
> > >       int in_range = cros_ec_lpc_mec_in_range(offset, length);
> > >
> > > @@ -64,7 +65,7 @@ u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > >               cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE,
> > >                                        offset - EC_HOST_CMD_REGION0,
> > >                                        length, msg) :
> > > -             lpc_write_bytes(offset, length, msg);
> > > +             cros_ec_lpc_write_bytes(offset, length, msg);
> > >  }
> > >
> > >  void cros_ec_lpc_reg_init(void)
> > > @@ -77,25 +78,3 @@ void cros_ec_lpc_reg_destroy(void)
> > >  {
> > >       cros_ec_lpc_mec_destroy();
> > >  }
> > > -
> > > -#else /* CONFIG_CROS_EC_LPC_MEC */
> > > -
> > > -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > -{
> > > -     return lpc_read_bytes(offset, length, dest);
> > > -}
> > > -
> > > -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > -{
> > > -     return lpc_write_bytes(offset, length, msg);
> > > -}
> > > -
> > > -void cros_ec_lpc_reg_init(void)
> > > -{
> > > -}
> > > -
> > > -void cros_ec_lpc_reg_destroy(void)
> > > -{
> > > -}
> > > -
> > > -#endif /* CONFIG_CROS_EC_LPC_MEC */
> > > diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.h b/drivers/platform/chrome/cros_ec_lpc_reg.h
> > > index 416fd2572182..e8d53fb8a2bc 100644
> > > --- a/drivers/platform/chrome/cros_ec_lpc_reg.h
> > > +++ b/drivers/platform/chrome/cros_ec_lpc_reg.h
> > > @@ -28,6 +28,32 @@ u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest);
> > >   */
> > >  u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg);
> > >
> > > +/**
> > > + * cros_ec_lpc_mec_read_bytes() - Read bytes from a given LPC-mapped address.
> > > + * @offset: Base read address
> > > + * @length: Number of bytes to read
> > > + * @dest: Destination buffer
> > > + *
> > > + * This function is for the MEC (Microchip Embedded Controller) variant.
> > > + *
> > > + * Return: 8-bit checksum of all bytes read.
> > > + */
> > > +u8 cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length,
> > > +                           u8 *dest);
> > > +
> > > +/**
> > > + * cros_ec_lpc_mec_write_bytes - Write bytes to a given LPC-mapped address.
> > > + * @offset: Base write address
> > > + * @length: Number of bytes to write
> > > + * @msg: Write data buffer
> > > + *
> > > + * This function is for the MEC (Microchip Embedded Controller) variant.
> > > + *
> > > + * Return: 8-bit checksum of all bytes written.
> > > + */
> > > +u8 cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length,
> > > +                            u8 *msg);
> > > +
> > >  /**
> > >   * cros_ec_lpc_reg_init
> > >   *
> > > diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
> > > index fd29cbfd3d5d..c63ff2508409 100644
> > > --- a/drivers/platform/chrome/wilco_ec/Kconfig
> > > +++ b/drivers/platform/chrome/wilco_ec/Kconfig
> > > @@ -1,7 +1,7 @@
> > >  # SPDX-License-Identifier: GPL-2.0-only
> > >  config WILCO_EC
> > >       tristate "ChromeOS Wilco Embedded Controller"
> > > -     depends on ACPI && X86 && CROS_EC_LPC && CROS_EC_LPC_MEC
> > > +     depends on ACPI && X86 && CROS_EC_LPC
> > >       help
> > >         If you say Y here, you get support for talking to the ChromeOS
> > >         Wilco EC over an eSPI bus. This uses a simple byte-level protocol
> > > --
> > > 2.20.1
> > >
> > >
> >
> >