Received: by 2002:a25:ab43:0:0:0:0:0 with SMTP id u61csp2518237ybi; Sun, 9 Jun 2019 13:53:04 -0700 (PDT) X-Google-Smtp-Source: APXvYqzENNXE//pNU1FjLFS88U6EcQsErpH9ecJzfVsAz2RgAiZns8E1FfwO8qo+6h0PgflRMya6 X-Received: by 2002:a17:90a:db42:: with SMTP id u2mr8562836pjx.48.1560113584037; Sun, 09 Jun 2019 13:53:04 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1560113584; cv=none; d=google.com; s=arc-20160816; b=ejok4JoW2hUyKlFcXPnjgyPSfJQe9T0rPVi5UTL6xp9WCWFySsqJtW7rLXmZuyvo4G UzzUb1kJCmYZ0YnNFDYJqerfhO3ktKh1o8s31dwSGGNbR6ccl9dUQMX9nhIiTo3HVbYj TDwEO56Yqrf3Y8Fq+AVCyS5opkySvSHpecdOIT+Bk0zS9LmVlbdRcQsSkA2XcS7QDIM+ QoQuXXZzEkNV8nMjNB5tp7dIaa4h+AVrsPxB/sqGcbtUEnQ3yJVBQ8Yb2mTeyhJdmYz1 GkCyk+hlVP6G0yGDpNTa67XRsI3et1WYL9YVCoSQe94l64hS3WJ3Hr2TqSvHD1nX2B5t s4fA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:user-agent:in-reply-to :content-disposition:mime-version:references:message-id:subject:cc :to:from:date:dkim-signature; bh=w52N7/nsPP7oW+J/fbnpUm66oT1x4YGWaSLG9imrnow=; b=WbukmZ12hr57h/xi76GojsrEMPcU8DtofAsI2RueBdg8Nt4BV61bfK2CHuuHJLFsDB 94QxL+0S6o0xRak/JehA0u6Ogn9F7zvS/bF4VPqtSavvcYPjt1AYiOP8qbYnjhkSSuWE m3yxBJBjKbTDwi7H/cOmXJ/yZ7XE7iTB8sXhaEBPjKtgltPzNdHZmFFR2xJ+mqdyFCnI se+U1L76axB5lRyV6iRdU+s9xXEdxYHgr4KEd1Fwzaxu9hCBXjT6uNahc1u3VWK6Hgma n9qSCNiziLiUzFT3tImB4+KwKHKYOFwgIVXtxeWQKj3xyaTTg8RIQkaVjim+fH6KDAb1 xfjw== ARC-Authentication-Results: i=1; mx.google.com; dkim=fail header.i=@gmail.com header.s=20161025 header.b=QwmDB5tb; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id 194si1407404pga.203.2019.06.09.13.52.45; Sun, 09 Jun 2019 13:53:04 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=fail header.i=@gmail.com header.s=20161025 header.b=QwmDB5tb; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729829AbfFIUvZ (ORCPT + 99 others); Sun, 9 Jun 2019 16:51:25 -0400 Received: from mail-pl1-f196.google.com ([209.85.214.196]:37305 "EHLO mail-pl1-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725933AbfFIUvZ (ORCPT ); Sun, 9 Jun 2019 16:51:25 -0400 Received: by mail-pl1-f196.google.com with SMTP id bh12so2794133plb.4; Sun, 09 Jun 2019 13:51:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=sender:date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to:user-agent; bh=w52N7/nsPP7oW+J/fbnpUm66oT1x4YGWaSLG9imrnow=; b=QwmDB5tbuNTwAidQZwOVbvvM1kdepmJ9UvcOm3VNsEFOs0/4YnFs1HJwAdWZ64Ukkc gtwtCVV4DGMN4vvU93c8jBjvgDZAHkx9hvqrEP+ZpFXTIKT/ju7XxlEFFk5Z/Gx8KJ2s UbhP1+HY8Z9juZ+sqXksM52FpJZ3al+B3vj6bPpEd9xQoEOp9DhnSB6C5xput7KiCT9U I3CyrXsRcLwbsECbkeks7vh7I98XzDUOJBGzt/RTsf+4UUi3lLcUSD35A8s3BpkyhM0b K7t3yMr0xEP2anFWtNDqMsOUcpcbqXRkw41u48J0LjKzQ62+dVmM3hIjqtsdeHBFHP01 zV6A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:date:from:to:cc:subject:message-id :references:mime-version:content-disposition:in-reply-to:user-agent; bh=w52N7/nsPP7oW+J/fbnpUm66oT1x4YGWaSLG9imrnow=; b=XSm7isCOSxXHZo5Rna3cdw+WXiT7hzoWw2P5HTcKnJcXOU8I81/aiNka4bmmjO+Uqp IcUXKPxkvm1sroUUlIZp722fqaSbN1wRmqk3FbMtv//t7sf/58kuEVJ3z6WsJybjnZ1N hBaOz+IALCMwfXAkGoplNNn/XytKPdhww1HF/UeSGTCWhS3Oy8dKQ5aB6jHrsyJwk8IL xSyP9bIgQKg8S8o/RlRcEGA0TkRzN7seG5Zc/WvL/XZKwJWgFegNzSWNPwxgB5OxlLUH gJVebhTa1wfVPK+Gh505cryKAncXqgCpN+ziJ1itHXmk7pImay/9ohn5loqXPQ5tirX6 e1Ng== X-Gm-Message-State: APjAAAUFnJuDhtR/sQBYDmFImJU99/ahxAA94po5g/Az2N6jai7IjDez r1HOE/6vpaOyJJDsiZvXYds= X-Received: by 2002:a17:902:7897:: with SMTP id q23mr66457479pll.21.1560113482377; Sun, 09 Jun 2019 13:51:22 -0700 (PDT) Received: from localhost ([2600:1700:e321:62f0:329c:23ff:fee3:9d7c]) by smtp.gmail.com with ESMTPSA id y22sm10845940pfo.39.2019.06.09.13.51.21 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 09 Jun 2019 13:51:21 -0700 (PDT) Date: Sun, 9 Jun 2019 13:51:20 -0700 From: Guenter Roeck To: Mauro Carvalho Chehab Cc: Linux Doc Mailing List , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Wim Van Sebroeck , Jerry Hoemann , linux-watchdog@vger.kernel.org Subject: Re: [PATCH v3 30/33] docs: watchdog: convert docs to ReST and rename to *.rst Message-ID: <20190609205120.GA13442@roeck-us.net> References: <8c4657f2999cb81df52d73bdcb6a5fe02bd5677d.1560045490.git.mchehab+samsung@kernel.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <8c4657f2999cb81df52d73bdcb6a5fe02bd5677d.1560045490.git.mchehab+samsung@kernel.org> User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sat, Jun 08, 2019 at 11:27:20PM -0300, Mauro Carvalho Chehab wrote: > Convert those documents and prepare them to be part of the kernel > API book, as most of the stuff there are related to the > Kernel interfaces. > > Still, in the future, it would make sense to split the docs, > as some of the stuff is clearly focused on sysadmin tasks. > > The conversion is actually: > - add blank lines and identation in order to identify paragraphs; > - fix tables markups; > - add some lists markups; > - mark literal blocks; > - adjust title markups. > > At its new index.rst, let's add a :orphan: while this is not linked to > the main index.rst file, in order to avoid build warnings. > > Cc: Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet > Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Guenter Roeck > --- > .../admin-guide/kernel-parameters.txt | 2 +- > Documentation/kernel-per-CPU-kthreads.txt | 2 +- > ....txt => convert_drivers_to_kernel_api.rst} | 109 +-- > .../watchdog/{hpwdt.txt => hpwdt.rst} | 25 +- > Documentation/watchdog/index.rst | 25 + > .../watchdog/{mlx-wdt.txt => mlx-wdt.rst} | 24 +- > .../{pcwd-watchdog.txt => pcwd-watchdog.rst} | 13 +- > .../{watchdog-api.txt => watchdog-api.rst} | 76 +- > ...kernel-api.txt => watchdog-kernel-api.rst} | 91 ++- > ...parameters.txt => watchdog-parameters.rst} | 672 +++++++++++++----- > .../{watchdog-pm.txt => watchdog-pm.rst} | 3 + > Documentation/watchdog/{wdt.txt => wdt.rst} | 31 +- > MAINTAINERS | 2 +- > drivers/watchdog/Kconfig | 6 +- > drivers/watchdog/smsc37b787_wdt.c | 2 +- > 15 files changed, 767 insertions(+), 316 deletions(-) > rename Documentation/watchdog/{convert_drivers_to_kernel_api.txt => convert_drivers_to_kernel_api.rst} (75%) > rename Documentation/watchdog/{hpwdt.txt => hpwdt.rst} (79%) > create mode 100644 Documentation/watchdog/index.rst > rename Documentation/watchdog/{mlx-wdt.txt => mlx-wdt.rst} (78%) > rename Documentation/watchdog/{pcwd-watchdog.txt => pcwd-watchdog.rst} (89%) > rename Documentation/watchdog/{watchdog-api.txt => watchdog-api.rst} (80%) > rename Documentation/watchdog/{watchdog-kernel-api.txt => watchdog-kernel-api.rst} (90%) > rename Documentation/watchdog/{watchdog-parameters.txt => watchdog-parameters.rst} (42%) > rename Documentation/watchdog/{watchdog-pm.txt => watchdog-pm.rst} (92%) > rename Documentation/watchdog/{wdt.txt => wdt.rst} (68%) > > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt > index 0092a453f7dc..3d072ca532bb 100644 > --- a/Documentation/admin-guide/kernel-parameters.txt > +++ b/Documentation/admin-guide/kernel-parameters.txt > @@ -5182,7 +5182,7 @@ > Default: 3 = cyan. > > watchdog timers [HW,WDT] For information on watchdog timers, > - see Documentation/watchdog/watchdog-parameters.txt > + see Documentation/watchdog/watchdog-parameters.rst > or other driver-specific files in the > Documentation/watchdog/ directory. > > diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt > index 23b0c8b20cd1..5623b9916411 100644 > --- a/Documentation/kernel-per-CPU-kthreads.txt > +++ b/Documentation/kernel-per-CPU-kthreads.txt > @@ -348,7 +348,7 @@ To reduce its OS jitter, do at least one of the following: > 2. Boot with "nosoftlockup=0", which will also prevent these kthreads > from being created. Other related watchdog and softlockup boot > parameters may be found in Documentation/admin-guide/kernel-parameters.rst > - and Documentation/watchdog/watchdog-parameters.txt. > + and Documentation/watchdog/watchdog-parameters.rst. > 3. Echo a zero to /proc/sys/kernel/watchdog to disable the > watchdog timer. > 4. Echo a large number of /proc/sys/kernel/watchdog_thresh in > diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.txt b/Documentation/watchdog/convert_drivers_to_kernel_api.rst > similarity index 75% > rename from Documentation/watchdog/convert_drivers_to_kernel_api.txt > rename to Documentation/watchdog/convert_drivers_to_kernel_api.rst > index 9fffb2958d13..dd934cc08e40 100644 > --- a/Documentation/watchdog/convert_drivers_to_kernel_api.txt > +++ b/Documentation/watchdog/convert_drivers_to_kernel_api.rst > @@ -1,6 +1,8 @@ > +========================================================= > Converting old watchdog drivers to the watchdog framework > +========================================================= > + > by Wolfram Sang > -========================================================= > > Before the watchdog framework came into the kernel, every driver had to > implement the API on its own. Now, as the framework factored out the common > @@ -69,16 +71,16 @@ Here is a overview of the functions and probably needed actions: > -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error > is directly given to the user. > > -Example conversion: > +Example conversion:: > > --static const struct file_operations s3c2410wdt_fops = { > -- .owner = THIS_MODULE, > -- .llseek = no_llseek, > -- .write = s3c2410wdt_write, > -- .unlocked_ioctl = s3c2410wdt_ioctl, > -- .open = s3c2410wdt_open, > -- .release = s3c2410wdt_release, > --}; > + -static const struct file_operations s3c2410wdt_fops = { > + - .owner = THIS_MODULE, > + - .llseek = no_llseek, > + - .write = s3c2410wdt_write, > + - .unlocked_ioctl = s3c2410wdt_ioctl, > + - .open = s3c2410wdt_open, > + - .release = s3c2410wdt_release, > + -}; > > Check the functions for device-specific stuff and keep it for later > refactoring. The rest can go. > @@ -89,24 +91,24 @@ Remove the miscdevice > > Since the file_operations are gone now, you can also remove the 'struct > miscdevice'. The framework will create it on watchdog_dev_register() called by > -watchdog_register_device(). > +watchdog_register_device():: > > --static struct miscdevice s3c2410wdt_miscdev = { > -- .minor = WATCHDOG_MINOR, > -- .name = "watchdog", > -- .fops = &s3c2410wdt_fops, > --}; > + -static struct miscdevice s3c2410wdt_miscdev = { > + - .minor = WATCHDOG_MINOR, > + - .name = "watchdog", > + - .fops = &s3c2410wdt_fops, > + -}; > > > Remove obsolete includes and defines > ------------------------------------ > > Because of the simplifications, a few defines are probably unused now. Remove > -them. Includes can be removed, too. For example: > +them. Includes can be removed, too. For example:: > > -- #include > -- #include (if MODULE_ALIAS_MISCDEV is not used) > -- #include (if no custom IOCTLs are used) > + - #include > + - #include (if MODULE_ALIAS_MISCDEV is not used) > + - #include (if no custom IOCTLs are used) > > > Add the watchdog operations > @@ -121,30 +123,30 @@ change the function header. Other changes are most likely not needed, because > here simply happens the direct hardware access. If you have device-specific > code left from the above steps, it should be refactored into these callbacks. > > -Here is a simple example: > +Here is a simple example:: > > -+static struct watchdog_ops s3c2410wdt_ops = { > -+ .owner = THIS_MODULE, > -+ .start = s3c2410wdt_start, > -+ .stop = s3c2410wdt_stop, > -+ .ping = s3c2410wdt_keepalive, > -+ .set_timeout = s3c2410wdt_set_heartbeat, > -+}; > + +static struct watchdog_ops s3c2410wdt_ops = { > + + .owner = THIS_MODULE, > + + .start = s3c2410wdt_start, > + + .stop = s3c2410wdt_stop, > + + .ping = s3c2410wdt_keepalive, > + + .set_timeout = s3c2410wdt_set_heartbeat, > + +}; > > -A typical function-header change looks like: > +A typical function-header change looks like:: > > --static void s3c2410wdt_keepalive(void) > -+static int s3c2410wdt_keepalive(struct watchdog_device *wdd) > - { > -... > -+ > -+ return 0; > - } > + -static void s3c2410wdt_keepalive(void) > + +static int s3c2410wdt_keepalive(struct watchdog_device *wdd) > + { > + ... > + + > + + return 0; > + } > > -... > + ... > > -- s3c2410wdt_keepalive(); > -+ s3c2410wdt_keepalive(&s3c2410_wdd); > + - s3c2410wdt_keepalive(); > + + s3c2410wdt_keepalive(&s3c2410_wdd); > > > Add the watchdog device > @@ -159,12 +161,12 @@ static variables. Those have to be converted to use the members in > watchdog_device. Note that the timeout values are unsigned int. Some drivers > use signed int, so this has to be converted, too. > > -Here is a simple example for a watchdog device: > +Here is a simple example for a watchdog device:: > > -+static struct watchdog_device s3c2410_wdd = { > -+ .info = &s3c2410_wdt_ident, > -+ .ops = &s3c2410wdt_ops, > -+}; > + +static struct watchdog_device s3c2410_wdd = { > + + .info = &s3c2410_wdt_ident, > + + .ops = &s3c2410wdt_ops, > + +}; > > > Handle the 'nowayout' feature > @@ -173,12 +175,12 @@ Handle the 'nowayout' feature > A few drivers use nowayout statically, i.e. there is no module parameter for it > and only CONFIG_WATCHDOG_NOWAYOUT determines if the feature is going to be > used. This needs to be converted by initializing the status variable of the > -watchdog_device like this: > +watchdog_device like this:: > > .status = WATCHDOG_NOWAYOUT_INIT_STATUS, > > Most drivers, however, also allow runtime configuration of nowayout, usually > -by adding a module parameter. The conversion for this would be something like: > +by adding a module parameter. The conversion for this would be something like:: > > watchdog_set_nowayout(&s3c2410_wdd, nowayout); > > @@ -191,15 +193,15 @@ Register the watchdog device > > Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev). > Make sure the return value gets checked and the error message, if present, > -still fits. Also convert the unregister case. > +still fits. Also convert the unregister case:: > > -- ret = misc_register(&s3c2410wdt_miscdev); > -+ ret = watchdog_register_device(&s3c2410_wdd); > + - ret = misc_register(&s3c2410wdt_miscdev); > + + ret = watchdog_register_device(&s3c2410_wdd); > > -... > + ... > > -- misc_deregister(&s3c2410wdt_miscdev); > -+ watchdog_unregister_device(&s3c2410_wdd); > + - misc_deregister(&s3c2410wdt_miscdev); > + + watchdog_unregister_device(&s3c2410_wdd); > > > Update the Kconfig-entry > @@ -207,7 +209,7 @@ Update the Kconfig-entry > > The entry for the driver now needs to select WATCHDOG_CORE: > > -+ select WATCHDOG_CORE > + + select WATCHDOG_CORE > > > Create a patch and send it to upstream > @@ -215,4 +217,3 @@ Create a patch and send it to upstream > > Make sure you understood Documentation/process/submitting-patches.rst and send your patch to > linux-watchdog@vger.kernel.org. We are looking forward to it :) > - > diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.rst > similarity index 79% > rename from Documentation/watchdog/hpwdt.txt > rename to Documentation/watchdog/hpwdt.rst > index aaa9e4b4bdcd..94a96371113e 100644 > --- a/Documentation/watchdog/hpwdt.txt > +++ b/Documentation/watchdog/hpwdt.rst > @@ -1,7 +1,12 @@ > +=========================== > +HPE iLO NMI Watchdog Driver > +=========================== > + > +for iLO based ProLiant Servers > +============================== > + > Last reviewed: 08/20/2018 > > - HPE iLO NMI Watchdog Driver > - for iLO based ProLiant Servers > > The HPE iLO NMI Watchdog driver is a kernel module that provides basic > watchdog functionality and handler for the iLO "Generate NMI to System" > @@ -20,23 +25,26 @@ Last reviewed: 08/20/2018 > > The hpwdt driver also has the following module parameters: > > - soft_margin - allows the user to set the watchdog timer value. > + ============ ================================================================ > + soft_margin allows the user to set the watchdog timer value. > Default value is 30 seconds. > - timeout - an alias of soft_margin. > - pretimeout - allows the user to set the watchdog pretimeout value. > + timeout an alias of soft_margin. > + pretimeout allows the user to set the watchdog pretimeout value. > This is the number of seconds before timeout when an > NMI is delivered to the system. Setting the value to > zero disables the pretimeout NMI. > Default value is 9 seconds. > - nowayout - basic watchdog parameter that does not allow the timer to > + nowayout basic watchdog parameter that does not allow the timer to > be restarted or an impending ASR to be escaped. > Default value is set when compiling the kernel. If it is set > to "Y", then there is no way of disabling the watchdog once > it has been started. > + ============ ================================================================ > > - NOTE: More information about watchdog drivers in general, including the ioctl > + NOTE: > + More information about watchdog drivers in general, including the ioctl > interface to /dev/watchdog can be found in > - Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt. > + Documentation/watchdog/watchdog-api.rst and Documentation/IPMI.txt. > > Due to limitations in the iLO hardware, the NMI pretimeout if enabled, > can only be set to 9 seconds. Attempts to set pretimeout to other > @@ -63,4 +71,3 @@ Last reviewed: 08/20/2018 > > The HPE iLO NMI Watchdog Driver and documentation were originally developed > by Tom Mingarelli. > - > diff --git a/Documentation/watchdog/index.rst b/Documentation/watchdog/index.rst > new file mode 100644 > index 000000000000..33a0de631e84 > --- /dev/null > +++ b/Documentation/watchdog/index.rst > @@ -0,0 +1,25 @@ > +:orphan: > + > +====================== > +Linux Watchdog Support > +====================== > + > +.. toctree:: > + :maxdepth: 1 > + > + hpwdt > + mlx-wdt > + pcwd-watchdog > + watchdog-api > + watchdog-kernel-api > + watchdog-parameters > + watchdog-pm > + wdt > + convert_drivers_to_kernel_api > + > +.. only:: subproject and html > + > + Indices > + ======= > + > + * :ref:`genindex` > diff --git a/Documentation/watchdog/mlx-wdt.txt b/Documentation/watchdog/mlx-wdt.rst > similarity index 78% > rename from Documentation/watchdog/mlx-wdt.txt > rename to Documentation/watchdog/mlx-wdt.rst > index 66eeb78505c3..bf5bafac47f0 100644 > --- a/Documentation/watchdog/mlx-wdt.txt > +++ b/Documentation/watchdog/mlx-wdt.rst > @@ -1,5 +1,9 @@ > - Mellanox watchdog drivers > - for x86 based system switches > +========================= > +Mellanox watchdog drivers > +========================= > + > +for x86 based system switches > +============================= > > This driver provides watchdog functionality for various Mellanox > Ethernet and Infiniband switch systems. > @@ -9,16 +13,16 @@ Mellanox watchdog device is implemented in a programmable logic device. > There are 2 types of HW watchdog implementations. > > Type 1: > -Actual HW timeout can be defined as a power of 2 msec. > -e.g. timeout 20 sec will be rounded up to 32768 msec. > -The maximum timeout period is 32 sec (32768 msec.), > -Get time-left isn't supported > + Actual HW timeout can be defined as a power of 2 msec. > + e.g. timeout 20 sec will be rounded up to 32768 msec. > + The maximum timeout period is 32 sec (32768 msec.), > + Get time-left isn't supported > > Type 2: > -Actual HW timeout is defined in sec. and it's the same as > -a user-defined timeout. > -Maximum timeout is 255 sec. > -Get time-left is supported. > + Actual HW timeout is defined in sec. and it's the same as > + a user-defined timeout. > + Maximum timeout is 255 sec. > + Get time-left is supported. > > Type 1 HW watchdog implementation exist in old systems and > all new systems have type 2 HW watchdog. > diff --git a/Documentation/watchdog/pcwd-watchdog.txt b/Documentation/watchdog/pcwd-watchdog.rst > similarity index 89% > rename from Documentation/watchdog/pcwd-watchdog.txt > rename to Documentation/watchdog/pcwd-watchdog.rst > index b8e60a441a43..405e2a370082 100644 > --- a/Documentation/watchdog/pcwd-watchdog.txt > +++ b/Documentation/watchdog/pcwd-watchdog.rst > @@ -1,8 +1,13 @@ > +=================================== > +Berkshire Products PC Watchdog Card > +=================================== > + > Last reviewed: 10/05/2007 > > - Berkshire Products PC Watchdog Card > - Support for ISA Cards Revision A and C > - Documentation and Driver by Ken Hollis > +Support for ISA Cards Revision A and C > +======================================= > + > +Documentation and Driver by Ken Hollis > > The PC Watchdog is a card that offers the same type of functionality that > the WDT card does, only it doesn't require an IRQ to run. Furthermore, > @@ -33,6 +38,7 @@ Last reviewed: 10/05/2007 > WDIOC_GETSUPPORT > This returns the support of the card itself. This > returns in structure "PCWDS" which returns: > + > options = WDIOS_TEMPPANIC > (This card supports temperature) > firmware_version = xxxx > @@ -63,4 +69,3 @@ Last reviewed: 10/05/2007 > > -- Ken Hollis > (kenji@bitgate.com) > - > diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.rst > similarity index 80% > rename from Documentation/watchdog/watchdog-api.txt > rename to Documentation/watchdog/watchdog-api.rst > index 0e62ba33b7fb..c6c1e9fa9f73 100644 > --- a/Documentation/watchdog/watchdog-api.txt > +++ b/Documentation/watchdog/watchdog-api.rst > @@ -1,7 +1,10 @@ > +============================= > +The Linux Watchdog driver API > +============================= > + > Last reviewed: 10/05/2007 > > > -The Linux Watchdog driver API. > > Copyright 2002 Christer Weingel > > @@ -10,7 +13,8 @@ driver which is (c) Copyright 2000 Jakob Oestergaard > > This document describes the state of the Linux 2.4.18 kernel. > > -Introduction: > +Introduction > +============ > > A Watchdog Timer (WDT) is a hardware circuit that can reset the > computer system in case of a software fault. You probably knew that > @@ -30,7 +34,8 @@ drivers implement different, and sometimes incompatible, parts of it. > This file is an attempt to document the existing usage and allow > future driver writers to use it as a reference. > > -The simplest API: > +The simplest API > +================ > > All drivers support the basic mode of operation, where the watchdog > activates as soon as /dev/watchdog is opened and will reboot unless > @@ -54,7 +59,8 @@ after the timeout has passed. Watchdog devices also usually support > the nowayout module parameter so that this option can be controlled at > runtime. > > -Magic Close feature: > +Magic Close feature > +=================== > > If a driver supports "Magic Close", the driver will not disable the > watchdog unless a specific magic character 'V' has been sent to > @@ -64,7 +70,8 @@ will assume that the daemon (and userspace in general) died, and will > stop pinging the watchdog without disabling it first. This will then > cause a reboot if the watchdog is not re-opened in sufficient time. > > -The ioctl API: > +The ioctl API > +============= > > All conforming drivers also support an ioctl API. > > @@ -73,7 +80,7 @@ Pinging the watchdog using an ioctl: > All drivers that have an ioctl interface support at least one ioctl, > KEEPALIVE. This ioctl does exactly the same thing as a write to the > watchdog device, so the main loop in the above program could be > -replaced with: > +replaced with:: > > while (1) { > ioctl(fd, WDIOC_KEEPALIVE, 0); > @@ -82,14 +89,15 @@ replaced with: > > the argument to the ioctl is ignored. > > -Setting and getting the timeout: > +Setting and getting the timeout > +=============================== > > For some drivers it is possible to modify the watchdog timeout on the > fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT > flag set in their option field. The argument is an integer > representing the timeout in seconds. The driver returns the real > timeout used in the same variable, and this timeout might differ from > -the requested one due to limitation of the hardware. > +the requested one due to limitation of the hardware:: > > int timeout = 45; > ioctl(fd, WDIOC_SETTIMEOUT, &timeout); > @@ -99,18 +107,19 @@ This example might actually print "The timeout was set to 60 seconds" > if the device has a granularity of minutes for its timeout. > > Starting with the Linux 2.4.18 kernel, it is possible to query the > -current timeout using the GETTIMEOUT ioctl. > +current timeout using the GETTIMEOUT ioctl:: > > ioctl(fd, WDIOC_GETTIMEOUT, &timeout); > printf("The timeout was is %d seconds\n", timeout); > > -Pretimeouts: > +Pretimeouts > +=========== > > Some watchdog timers can be set to have a trigger go off before the > actual time they will reset the system. This can be done with an NMI, > interrupt, or other mechanism. This allows Linux to record useful > information (like panic information and kernel coredumps) before it > -resets. > +resets:: > > pretimeout = 10; > ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout); > @@ -121,89 +130,113 @@ the pretimeout. So, for instance, if you set the timeout to 60 seconds > and the pretimeout to 10 seconds, the pretimeout will go off in 50 > seconds. Setting a pretimeout to zero disables it. > > -There is also a get function for getting the pretimeout: > +There is also a get function for getting the pretimeout:: > > ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout); > printf("The pretimeout was is %d seconds\n", timeout); > > Not all watchdog drivers will support a pretimeout. > > -Get the number of seconds before reboot: > +Get the number of seconds before reboot > +======================================= > > Some watchdog drivers have the ability to report the remaining time > before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl > -that returns the number of seconds before reboot. > +that returns the number of seconds before reboot:: > > ioctl(fd, WDIOC_GETTIMELEFT, &timeleft); > printf("The timeout was is %d seconds\n", timeleft); > > -Environmental monitoring: > +Environmental monitoring > +======================== > > All watchdog drivers are required return more information about the system, > some do temperature, fan and power level monitoring, some can tell you > the reason for the last reboot of the system. The GETSUPPORT ioctl is > -available to ask what the device can do: > +available to ask what the device can do:: > > struct watchdog_info ident; > ioctl(fd, WDIOC_GETSUPPORT, &ident); > > the fields returned in the ident struct are: > > + ================ ============================================= > identity a string identifying the watchdog driver > firmware_version the firmware version of the card if available > options a flags describing what the device supports > + ================ ============================================= > > the options field can have the following bits set, and describes what > kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can > return. [FIXME -- Is this correct?] > > + ================ ========================= > WDIOF_OVERHEAT Reset due to CPU overheat > + ================ ========================= > > The machine was last rebooted by the watchdog because the thermal limit was > -exceeded > +exceeded: > > + ============== ========== > WDIOF_FANFAULT Fan failed > + ============== ========== > > A system fan monitored by the watchdog card has failed > > + ============= ================ > WDIOF_EXTERN1 External relay 1 > + ============= ================ > > External monitoring relay/source 1 was triggered. Controllers intended for > real world applications include external monitoring pins that will trigger > a reset. > > + ============= ================ > WDIOF_EXTERN2 External relay 2 > + ============= ================ > > External monitoring relay/source 2 was triggered > > + ================ ===================== > WDIOF_POWERUNDER Power bad/power fault > + ================ ===================== > > The machine is showing an undervoltage status > > + =============== ============================= > WDIOF_CARDRESET Card previously reset the CPU > + =============== ============================= > > The last reboot was caused by the watchdog card > > + ================ ===================== > WDIOF_POWEROVER Power over voltage > + ================ ===================== > > The machine is showing an overvoltage status. Note that if one level is > under and one over both bits will be set - this may seem odd but makes > sense. > > + =================== ===================== > WDIOF_KEEPALIVEPING Keep alive ping reply > + =================== ===================== > > The watchdog saw a keepalive ping since it was last queried. > > + ================ ======================= > WDIOF_SETTIMEOUT Can set/get the timeout > + ================ ======================= > > The watchdog can do pretimeouts. > > + ================ ================================ > WDIOF_PRETIMEOUT Pretimeout (in seconds), get/set > + ================ ================================ > > > For those drivers that return any bits set in the option field, the > GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current > -status, and the status at the last reboot, respectively. > +status, and the status at the last reboot, respectively:: > > int flags; > ioctl(fd, WDIOC_GETSTATUS, &flags); > @@ -216,22 +249,23 @@ Note that not all devices support these two calls, and some only > support the GETBOOTSTATUS call. > > Some drivers can measure the temperature using the GETTEMP ioctl. The > -returned value is the temperature in degrees fahrenheit. > +returned value is the temperature in degrees fahrenheit:: > > int temperature; > ioctl(fd, WDIOC_GETTEMP, &temperature); > > Finally the SETOPTIONS ioctl can be used to control some aspects of > -the cards operation. > +the cards operation:: > > int options = 0; > ioctl(fd, WDIOC_SETOPTIONS, &options); > > The following options are available: > > + ================= ================================ > WDIOS_DISABLECARD Turn off the watchdog timer > WDIOS_ENABLECARD Turn on the watchdog timer > WDIOS_TEMPPANIC Kernel panic on temperature trip > + ================= ================================ > > [FIXME -- better explanations] > - > diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.rst > similarity index 90% > rename from Documentation/watchdog/watchdog-kernel-api.txt > rename to Documentation/watchdog/watchdog-kernel-api.rst > index 3a91ef5af044..864edbe932c1 100644 > --- a/Documentation/watchdog/watchdog-kernel-api.txt > +++ b/Documentation/watchdog/watchdog-kernel-api.rst > @@ -1,5 +1,7 @@ > -The Linux WatchDog Timer Driver Core kernel API. > =============================================== > +The Linux WatchDog Timer Driver Core kernel API > +=============================================== > + > Last reviewed: 12-Feb-2013 > > Wim Van Sebroeck > @@ -9,7 +11,7 @@ Introduction > This document does not describe what a WatchDog Timer (WDT) Driver or Device is. > It also does not describe the API which can be used by user space to communicate > with a WatchDog Timer. If you want to know this then please read the following > -file: Documentation/watchdog/watchdog-api.txt . > +file: Documentation/watchdog/watchdog-api.rst . > > So what does this document describe? It describes the API that can be used by > WatchDog Timer Drivers that want to use the WatchDog Timer Driver Core > @@ -23,10 +25,10 @@ The API > Each watchdog timer driver that wants to use the WatchDog Timer Driver Core > must #include (you would have to do this anyway when > writing a watchdog device driver). This include file contains following > -register/unregister routines: > +register/unregister routines:: > > -extern int watchdog_register_device(struct watchdog_device *); > -extern void watchdog_unregister_device(struct watchdog_device *); > + extern int watchdog_register_device(struct watchdog_device *); > + extern void watchdog_unregister_device(struct watchdog_device *); > > The watchdog_register_device routine registers a watchdog timer device. > The parameter of this routine is a pointer to a watchdog_device structure. > @@ -40,9 +42,9 @@ The watchdog subsystem includes an registration deferral mechanism, > which allows you to register an watchdog as early as you wish during > the boot process. > > -The watchdog device structure looks like this: > +The watchdog device structure looks like this:: > > -struct watchdog_device { > + struct watchdog_device { > int id; > struct device *parent; > const struct attribute_group **groups; > @@ -62,9 +64,10 @@ struct watchdog_device { > struct watchdog_core_data *wd_data; > unsigned long status; > struct list_head deferred; > -}; > + }; > > It contains following fields: > + > * id: set by watchdog_register_device, id 0 is special. It has both a > /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old > /dev/watchdog miscdev. The id is set automatically when calling > @@ -114,9 +117,9 @@ It contains following fields: > * deferred: entry in wtd_deferred_reg_list which is used to > register early initialized watchdogs. > > -The list of watchdog operations is defined as: > +The list of watchdog operations is defined as:: > > -struct watchdog_ops { > + struct watchdog_ops { > struct module *owner; > /* mandatory operations */ > int (*start)(struct watchdog_device *); > @@ -129,7 +132,7 @@ struct watchdog_ops { > unsigned int (*get_timeleft)(struct watchdog_device *); > int (*restart)(struct watchdog_device *); > long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); > -}; > + }; > > It is important that you first define the module owner of the watchdog timer > driver's operations. This module owner will be used to lock the module when > @@ -138,6 +141,7 @@ module and /dev/watchdog is still open). > > Some operations are mandatory and some are optional. The mandatory operations > are: > + > * start: this is a pointer to the routine that starts the watchdog timer > device. > The routine needs a pointer to the watchdog timer device structure as a > @@ -146,51 +150,64 @@ are: > Not all watchdog timer hardware supports the same functionality. That's why > all other routines/operations are optional. They only need to be provided if > they are supported. These optional routines/operations are: > + > * stop: with this routine the watchdog timer device is being stopped. > + > The routine needs a pointer to the watchdog timer device structure as a > parameter. It returns zero on success or a negative errno code for failure. > Some watchdog timer hardware can only be started and not be stopped. A > driver supporting such hardware does not have to implement the stop routine. > + > If a driver has no stop function, the watchdog core will set WDOG_HW_RUNNING > and start calling the driver's keepalive pings function after the watchdog > device is closed. > + > If a watchdog driver does not implement the stop function, it must set > max_hw_heartbeat_ms. > * ping: this is the routine that sends a keepalive ping to the watchdog timer > hardware. > + > The routine needs a pointer to the watchdog timer device structure as a > parameter. It returns zero on success or a negative errno code for failure. > + > Most hardware that does not support this as a separate function uses the > start function to restart the watchdog timer hardware. And that's also what > the watchdog timer driver core does: to send a keepalive ping to the watchdog > timer hardware it will either use the ping operation (when available) or the > start operation (when the ping operation is not available). > + > (Note: the WDIOC_KEEPALIVE ioctl call will only be active when the > WDIOF_KEEPALIVEPING bit has been set in the option field on the watchdog's > info structure). > * status: this routine checks the status of the watchdog timer device. The > status of the device is reported with watchdog WDIOF_* status flags/bits. > + > WDIOF_MAGICCLOSE and WDIOF_KEEPALIVEPING are reported by the watchdog core; > it is not necessary to report those bits from the driver. Also, if no status > function is provided by the driver, the watchdog core reports the status bits > provided in the bootstatus variable of struct watchdog_device. > + > * set_timeout: this routine checks and changes the timeout of the watchdog > timer device. It returns 0 on success, -EINVAL for "parameter out of range" > and -EIO for "could not write value to the watchdog". On success this > routine should set the timeout value of the watchdog_device to the > achieved timeout value (which may be different from the requested one > because the watchdog does not necessarily have a 1 second resolution). > + > Drivers implementing max_hw_heartbeat_ms set the hardware watchdog heartbeat > to the minimum of timeout and max_hw_heartbeat_ms. Those drivers set the > timeout value of the watchdog_device either to the requested timeout value > (if it is larger than max_hw_heartbeat_ms), or to the achieved timeout value. > (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the > watchdog's info structure). > + > If the watchdog driver does not have to perform any action but setting the > watchdog_device.timeout, this callback can be omitted. > + > If set_timeout is not provided but, WDIOF_SETTIMEOUT is set, the watchdog > infrastructure updates the timeout value of the watchdog_device internally > to the requested value. > + > If the pretimeout feature is used (WDIOF_PRETIMEOUT), then set_timeout must > also take care of checking if pretimeout is still valid and set up the timer > accordingly. This can't be done in the core without races, so it is the > @@ -201,13 +218,16 @@ they are supported. These optional routines/operations are: > seconds before the actual timeout would happen. It returns 0 on success, > -EINVAL for "parameter out of range" and -EIO for "could not write value to > the watchdog". A value of 0 disables pretimeout notification. > + > (Note: the WDIOF_PRETIMEOUT needs to be set in the options field of the > watchdog's info structure). > + > If the watchdog driver does not have to perform any action but setting the > watchdog_device.pretimeout, this callback can be omitted. That means if > set_pretimeout is not provided but WDIOF_PRETIMEOUT is set, the watchdog > infrastructure updates the pretimeout value of the watchdog_device internally > to the requested value. > + > * get_timeleft: this routines returns the time that's left before a reset. > * restart: this routine restarts the machine. It returns 0 on success or a > negative errno code for failure. > @@ -218,6 +238,7 @@ they are supported. These optional routines/operations are: > > The status bits should (preferably) be set with the set_bit and clear_bit alike > bit-operations. The status bits that are defined are: > + > * WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device > is active or not from user perspective. User space is expected to send > heartbeat requests to the driver while this flag is set. > @@ -235,22 +256,30 @@ bit-operations. The status bits that are defined are: > > To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog > timer device) you can either: > + > * set it statically in your watchdog_device struct with > + > .status = WATCHDOG_NOWAYOUT_INIT_STATUS, > + > (this will set the value the same as CONFIG_WATCHDOG_NOWAYOUT) or > - * use the following helper function: > - static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout) > + * use the following helper function:: > + > + static inline void watchdog_set_nowayout(struct watchdog_device *wdd, > + int nowayout) > + > +Note: > + The WatchDog Timer Driver Core supports the magic close feature and > + the nowayout feature. To use the magic close feature you must set the > + WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure. > > -Note: The WatchDog Timer Driver Core supports the magic close feature and > -the nowayout feature. To use the magic close feature you must set the > -WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure. > The nowayout feature will overrule the magic close feature. > > To get or set driver specific data the following two helper functions should be > -used: > +used:: > > -static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data) > -static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) > + static inline void watchdog_set_drvdata(struct watchdog_device *wdd, > + void *data) > + static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) > > The watchdog_set_drvdata function allows you to add driver specific data. The > arguments of this function are the watchdog device where you want to add the > @@ -260,10 +289,11 @@ The watchdog_get_drvdata function allows you to retrieve driver specific data. > The argument of this function is the watchdog device where you want to retrieve > data from. The function returns the pointer to the driver specific data. > > -To initialize the timeout field, the following function can be used: > +To initialize the timeout field, the following function can be used:: > > -extern int watchdog_init_timeout(struct watchdog_device *wdd, > - unsigned int timeout_parm, struct device *dev); > + extern int watchdog_init_timeout(struct watchdog_device *wdd, > + unsigned int timeout_parm, > + struct device *dev); > > The watchdog_init_timeout function allows you to initialize the timeout field > using the module timeout parameter or by retrieving the timeout-sec property from > @@ -272,30 +302,33 @@ to set the default timeout value as timeout value in the watchdog_device and > then use this function to set the user "preferred" timeout value. > This routine returns zero on success and a negative errno code for failure. > > -To disable the watchdog on reboot, the user must call the following helper: > +To disable the watchdog on reboot, the user must call the following helper:: > > -static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd); > + static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd); > > To disable the watchdog when unregistering the watchdog, the user must call > the following helper. Note that this will only stop the watchdog if the > nowayout flag is not set. > > -static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd); > +:: > + > + static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd); > > To change the priority of the restart handler the following helper should be > -used: > +used:: > > -void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority); > + void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority); > > User should follow the following guidelines for setting the priority: > + > * 0: should be called in last resort, has limited restart capabilities > * 128: default restart handler, use if no other handler is expected to be > available, and/or if restart is sufficient to restart the entire system > * 255: highest priority, will preempt all other restart handlers > > -To raise a pretimeout notification, the following function should be used: > +To raise a pretimeout notification, the following function should be used:: > > -void watchdog_notify_pretimeout(struct watchdog_device *wdd) > + void watchdog_notify_pretimeout(struct watchdog_device *wdd) > > The function can be called in the interrupt context. If watchdog pretimeout > governor framework (kbuild CONFIG_WATCHDOG_PRETIMEOUT_GOV symbol) is enabled, > diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.rst > similarity index 42% > rename from Documentation/watchdog/watchdog-parameters.txt > rename to Documentation/watchdog/watchdog-parameters.rst > index 0b88e333f9e1..b121caae7798 100644 > --- a/Documentation/watchdog/watchdog-parameters.txt > +++ b/Documentation/watchdog/watchdog-parameters.rst > @@ -1,410 +1,736 @@ > +========================== > +WatchDog Module Parameters > +========================== > + > This file provides information on the module parameters of many of > the Linux watchdog drivers. Watchdog driver parameter specs should > be listed here unless the driver has its own driver-specific information > file. > > - > See Documentation/admin-guide/kernel-parameters.rst for information on > providing kernel parameters for builtin drivers versus loadable > modules. > > - > ------------------------------------------------- > + > acquirewdt: > -wdt_stop: Acquire WDT 'stop' io port (default 0x43) > -wdt_start: Acquire WDT 'start' io port (default 0x443) > -nowayout: Watchdog cannot be stopped once started > + wdt_stop: > + Acquire WDT 'stop' io port (default 0x43) > + wdt_start: > + Acquire WDT 'start' io port (default 0x443) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > advantechwdt: > -wdt_stop: Advantech WDT 'stop' io port (default 0x443) > -wdt_start: Advantech WDT 'start' io port (default 0x443) > -timeout: Watchdog timeout in seconds. 1<= timeout <=63, default=60. > -nowayout: Watchdog cannot be stopped once started > + wdt_stop: > + Advantech WDT 'stop' io port (default 0x443) > + wdt_start: > + Advantech WDT 'start' io port (default 0x443) > + timeout: > + Watchdog timeout in seconds. 1<= timeout <=63, default=60. > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > alim1535_wdt: > -timeout: Watchdog timeout in seconds. (0 < timeout < 18000, default=60 > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. (0 < timeout < 18000, default=60 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > alim7101_wdt: > -timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30 > -use_gpio: Use the gpio watchdog (required by old cobalt boards). > + timeout: > + Watchdog timeout in seconds. (1<=timeout<=3600, default=30 > + use_gpio: > + Use the gpio watchdog (required by old cobalt boards). > default=0/off/no > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > ar7_wdt: > -margin: Watchdog margin in seconds (default=60) > -nowayout: Disable watchdog shutdown on close > + margin: > + Watchdog margin in seconds (default=60) > + nowayout: > + Disable watchdog shutdown on close > (default=kernel config parameter) > + > ------------------------------------------------- > + > armada_37xx_wdt: > -timeout: Watchdog timeout in seconds. (default=120) > -nowayout: Disable watchdog shutdown on close > + timeout: > + Watchdog timeout in seconds. (default=120) > + nowayout: > + Disable watchdog shutdown on close > (default=kernel config parameter) > + > ------------------------------------------------- > + > at91rm9200_wdt: > -wdt_time: Watchdog time in seconds. (default=5) > -nowayout: Watchdog cannot be stopped once started > + wdt_time: > + Watchdog time in seconds. (default=5) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > at91sam9_wdt: > -heartbeat: Watchdog heartbeats in seconds. (default = 15) > -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Watchdog heartbeats in seconds. (default = 15) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > bcm47xx_wdt: > -wdt_time: Watchdog time in seconds. (default=30) > -nowayout: Watchdog cannot be stopped once started > + wdt_time: > + Watchdog time in seconds. (default=30) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > coh901327_wdt: > -margin: Watchdog margin in seconds (default 60s) > + margin: > + Watchdog margin in seconds (default 60s) > + > ------------------------------------------------- > + > cpu5wdt: > -port: base address of watchdog card, default is 0x91 > -verbose: be verbose, default is 0 (no) > -ticks: count down ticks, default is 10000 > + port: > + base address of watchdog card, default is 0x91 > + verbose: > + be verbose, default is 0 (no) > + ticks: > + count down ticks, default is 10000 > + > ------------------------------------------------- > + > cpwd: > -wd0_timeout: Default watchdog0 timeout in 1/10secs > -wd1_timeout: Default watchdog1 timeout in 1/10secs > -wd2_timeout: Default watchdog2 timeout in 1/10secs > + wd0_timeout: > + Default watchdog0 timeout in 1/10secs > + wd1_timeout: > + Default watchdog1 timeout in 1/10secs > + wd2_timeout: > + Default watchdog2 timeout in 1/10secs > + > ------------------------------------------------- > + > da9052wdt: > -timeout: Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > davinci_wdt: > -heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60 > + heartbeat: > + Watchdog heartbeat period in seconds from 1 to 600, default 60 > + > ------------------------------------------------- > + > ebc-c384_wdt: > -timeout: Watchdog timeout in seconds. (1<=timeout<=15300, default=60) > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. (1<=timeout<=15300, default=60) > + nowayout: > + Watchdog cannot be stopped once started > + > ------------------------------------------------- > + > ep93xx_wdt: > -nowayout: Watchdog cannot be stopped once started > -timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD) > + nowayout: > + Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD) > + > ------------------------------------------------- > + > eurotechwdt: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > -io: Eurotech WDT io port (default=0x3f0) > -irq: Eurotech WDT irq (default=10) > -ev: Eurotech WDT event type (default is `int') > + io: > + Eurotech WDT io port (default=0x3f0) > + irq: > + Eurotech WDT irq (default=10) > + ev: > + Eurotech WDT event type (default is `int`) > + > ------------------------------------------------- > + > gef_wdt: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > geodewdt: > -timeout: Watchdog timeout in seconds. 1<= timeout <=131, default=60. > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. 1<= timeout <=131, default=60. > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > i6300esb: > -heartbeat: Watchdog heartbeat in seconds. (1 -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Watchdog heartbeat in seconds. (1 + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > iTCO_wdt: > -heartbeat: Watchdog heartbeat in seconds. > + heartbeat: > + Watchdog heartbeat in seconds. > (2 -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > iTCO_vendor_support: > -vendorsupport: iTCO vendor specific support mode, default=0 (none), > + vendorsupport: > + iTCO vendor specific support mode, default=0 (none), > 1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS > + > ------------------------------------------------- > + > ib700wdt: > -timeout: Watchdog timeout in seconds. 0<= timeout <=30, default=30. > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. 0<= timeout <=30, default=30. > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > ibmasr: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > imx2_wdt: > -timeout: Watchdog timeout in seconds (default 60 s) > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds (default 60 s) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > indydog: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > iop_wdt: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > it8712f_wdt: > -margin: Watchdog margin in seconds (default 60) > -nowayout: Disable watchdog shutdown on close > + margin: > + Watchdog margin in seconds (default 60) > + nowayout: > + Disable watchdog shutdown on close > (default=kernel config parameter) > + > ------------------------------------------------- > + > it87_wdt: > -nogameport: Forbid the activation of game port, default=0 > -nocir: Forbid the use of CIR (workaround for some buggy setups); set to 1 if > + nogameport: > + Forbid the activation of game port, default=0 > + nocir: > + Forbid the use of CIR (workaround for some buggy setups); set to 1 if > system resets despite watchdog daemon running, default=0 > -exclusive: Watchdog exclusive device open, default=1 > -timeout: Watchdog timeout in seconds, default=60 > -testmode: Watchdog test mode (1 = no reboot), default=0 > -nowayout: Watchdog cannot be stopped once started > + exclusive: > + Watchdog exclusive device open, default=1 > + timeout: > + Watchdog timeout in seconds, default=60 > + testmode: > + Watchdog test mode (1 = no reboot), default=0 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > ixp4xx_wdt: > -heartbeat: Watchdog heartbeat in seconds (default 60s) > -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Watchdog heartbeat in seconds (default 60s) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > ks8695_wdt: > -wdt_time: Watchdog time in seconds. (default=5) > -nowayout: Watchdog cannot be stopped once started > + wdt_time: > + Watchdog time in seconds. (default=5) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > machzwd: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > -action: after watchdog resets, generate: > + action: > + after watchdog resets, generate: > 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI > + > ------------------------------------------------- > + > max63xx_wdt: > -heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 60 > -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Watchdog heartbeat period in seconds from 1 to 60, default 60 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > -nodelay: Force selection of a timeout setting without initial delay > + nodelay: > + Force selection of a timeout setting without initial delay > (max6373/74 only, default=0) > + > ------------------------------------------------- > + > mixcomwd: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > mpc8xxx_wdt: > -timeout: Watchdog timeout in ticks. (0 -reset: Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in ticks. (0 + reset: > + Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > mv64x60_wdt: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > ni903x_wdt: > -timeout: Initial watchdog timeout in seconds (0 -nowayout: Watchdog cannot be stopped once started > + timeout: > + Initial watchdog timeout in seconds (0 + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > nic7018_wdt: > -timeout: Initial watchdog timeout in seconds (0 -nowayout: Watchdog cannot be stopped once started > + timeout: > + Initial watchdog timeout in seconds (0 + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > nuc900_wdt: > -heartbeat: Watchdog heartbeats in seconds. > + heartbeat: > + Watchdog heartbeats in seconds. > (default = 15) > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > omap_wdt: > -timer_margin: initial watchdog timeout (in seconds) > -early_enable: Watchdog is started on module insertion (default=0 > -nowayout: Watchdog cannot be stopped once started > + timer_margin: > + initial watchdog timeout (in seconds) > + early_enable: > + Watchdog is started on module insertion (default=0 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > orion_wdt: > -heartbeat: Initial watchdog heartbeat in seconds > -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Initial watchdog heartbeat in seconds > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > pc87413_wdt: > -io: pc87413 WDT I/O port (default: io). > -timeout: Watchdog timeout in minutes (default=timeout). > -nowayout: Watchdog cannot be stopped once started > + io: > + pc87413 WDT I/O port (default: io). > + timeout: > + Watchdog timeout in minutes (default=timeout). > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > pika_wdt: > -heartbeat: Watchdog heartbeats in seconds. (default = 15) > -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Watchdog heartbeats in seconds. (default = 15) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > pnx4008_wdt: > -heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 19 > -nowayout: Set to 1 to keep watchdog running after device release > + heartbeat: > + Watchdog heartbeat period in seconds from 1 to 60, default 19 > + nowayout: > + Set to 1 to keep watchdog running after device release > + > ------------------------------------------------- > + > pnx833x_wdt: > -timeout: Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds) > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > -start_enabled: Watchdog is started on module insertion (default=1) > + start_enabled: > + Watchdog is started on module insertion (default=1) > + > ------------------------------------------------- > + > rc32434_wdt: > -timeout: Watchdog timeout value, in seconds (default=20) > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout value, in seconds (default=20) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > riowd: > -riowd_timeout: Watchdog timeout in minutes (default=1) > + riowd_timeout: > + Watchdog timeout in minutes (default=1) > + > ------------------------------------------------- > + > s3c2410_wdt: > -tmr_margin: Watchdog tmr_margin in seconds. (default=15) > -tmr_atboot: Watchdog is started at boot time if set to 1, default=0 > -nowayout: Watchdog cannot be stopped once started > + tmr_margin: > + Watchdog tmr_margin in seconds. (default=15) > + tmr_atboot: > + Watchdog is started at boot time if set to 1, default=0 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > -soft_noboot: Watchdog action, set to 1 to ignore reboots, 0 to reboot > -debug: Watchdog debug, set to >1 for debug, (default 0) > + soft_noboot: > + Watchdog action, set to 1 to ignore reboots, 0 to reboot > + debug: > + Watchdog debug, set to >1 for debug, (default 0) > + > ------------------------------------------------- > + > sa1100_wdt: > -margin: Watchdog margin in seconds (default 60s) > + margin: > + Watchdog margin in seconds (default 60s) > + > ------------------------------------------------- > + > sb_wdog: > -timeout: Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs) > + timeout: > + Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs) > + > ------------------------------------------------- > + > sbc60xxwdt: > -wdt_stop: SBC60xx WDT 'stop' io port (default 0x45) > -wdt_start: SBC60xx WDT 'start' io port (default 0x443) > -timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30) > -nowayout: Watchdog cannot be stopped once started > + wdt_stop: > + SBC60xx WDT 'stop' io port (default 0x45) > + wdt_start: > + SBC60xx WDT 'start' io port (default 0x443) > + timeout: > + Watchdog timeout in seconds. (1<=timeout<=3600, default=30) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > sbc7240_wdt: > -timeout: Watchdog timeout in seconds. (1<=timeout<=255, default=30) > -nowayout: Disable watchdog when closing device file > + timeout: > + Watchdog timeout in seconds. (1<=timeout<=255, default=30) > + nowayout: > + Disable watchdog when closing device file > + > ------------------------------------------------- > + > sbc8360: > -timeout: Index into timeout table (0-63) (default=27 (60s)) > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Index into timeout table (0-63) (default=27 (60s)) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > sbc_epx_c3: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > sbc_fitpc2_wdt: > -margin: Watchdog margin in seconds (default 60s) > -nowayout: Watchdog cannot be stopped once started > + margin: > + Watchdog margin in seconds (default 60s) > + nowayout: > + Watchdog cannot be stopped once started > + > ------------------------------------------------- > + > sbsa_gwdt: > -timeout: Watchdog timeout in seconds. (default 10s) > -action: Watchdog action at the first stage timeout, > + timeout: > + Watchdog timeout in seconds. (default 10s) > + action: > + Watchdog action at the first stage timeout, > set to 0 to ignore, 1 to panic. (default=0) > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > sc1200wdt: > -isapnp: When set to 0 driver ISA PnP support will be disabled (default=1) > -io: io port > -timeout: range is 0-255 minutes, default is 1 > -nowayout: Watchdog cannot be stopped once started > + isapnp: > + When set to 0 driver ISA PnP support will be disabled (default=1) > + io: > + io port > + timeout: > + range is 0-255 minutes, default is 1 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > sc520_wdt: > -timeout: Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30) > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > sch311x_wdt: > -force_id: Override the detected device ID > -therm_trip: Should a ThermTrip trigger the reset generator > -timeout: Watchdog timeout in seconds. 1<= timeout <=15300, default=60 > -nowayout: Watchdog cannot be stopped once started > + force_id: > + Override the detected device ID > + therm_trip: > + Should a ThermTrip trigger the reset generator > + timeout: > + Watchdog timeout in seconds. 1<= timeout <=15300, default=60 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > scx200_wdt: > -margin: Watchdog margin in seconds > -nowayout: Disable watchdog shutdown on close > + margin: > + Watchdog margin in seconds > + nowayout: > + Disable watchdog shutdown on close > + > ------------------------------------------------- > + > shwdt: > -clock_division_ratio: Clock division ratio. Valid ranges are from 0x5 (1.31ms) > + clock_division_ratio: > + Clock division ratio. Valid ranges are from 0x5 (1.31ms) > to 0x7 (5.25ms). (default=7) > -heartbeat: Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 > -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > smsc37b787_wdt: > -timeout: range is 1-255 units, default is 60 > -nowayout: Watchdog cannot be stopped once started > + timeout: > + range is 1-255 units, default is 60 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > softdog: > -soft_margin: Watchdog soft_margin in seconds. > + soft_margin: > + Watchdog soft_margin in seconds. > (0 < soft_margin < 65536, default=60) > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > -soft_noboot: Softdog action, set to 1 to ignore reboots, 0 to reboot > + soft_noboot: > + Softdog action, set to 1 to ignore reboots, 0 to reboot > (default=0) > + > ------------------------------------------------- > + > stmp3xxx_wdt: > -heartbeat: Watchdog heartbeat period in seconds from 1 to 4194304, default 19 > + heartbeat: > + Watchdog heartbeat period in seconds from 1 to 4194304, default 19 > + > ------------------------------------------------- > + > tegra_wdt: > -heartbeat: Watchdog heartbeats in seconds. (default = 120) > -nowayout: Watchdog cannot be stopped once started > + heartbeat: > + Watchdog heartbeats in seconds. (default = 120) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > ts72xx_wdt: > -timeout: Watchdog timeout in seconds. (1 <= timeout <= 8, default=8) > -nowayout: Disable watchdog shutdown on close > + timeout: > + Watchdog timeout in seconds. (1 <= timeout <= 8, default=8) > + nowayout: > + Disable watchdog shutdown on close > + > ------------------------------------------------- > + > twl4030_wdt: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > txx9wdt: > -timeout: Watchdog timeout in seconds. (0 -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. (0 + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > uniphier_wdt: > -timeout: Watchdog timeout in power of two seconds. > + timeout: > + Watchdog timeout in power of two seconds. > (1 <= timeout <= 128, default=64) > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > w83627hf_wdt: > -wdt_io: w83627hf/thf WDT io port (default 0x2E) > -timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. > -nowayout: Watchdog cannot be stopped once started > + wdt_io: > + w83627hf/thf WDT io port (default 0x2E) > + timeout: > + Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > w83877f_wdt: > -timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30) > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. (1<=timeout<=3600, default=30) > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > w83977f_wdt: > -timeout: Watchdog timeout in seconds (15..7635), default=45) > -testmode: Watchdog testmode (1 = no reboot), default=0 > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds (15..7635), default=45) > + testmode: > + Watchdog testmode (1 = no reboot), default=0 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > wafer5823wdt: > -timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > wdt285: > -soft_margin: Watchdog timeout in seconds (default=60) > + soft_margin: > + Watchdog timeout in seconds (default=60) > + > ------------------------------------------------- > + > wdt977: > -timeout: Watchdog timeout in seconds (60..15300, default=60) > -testmode: Watchdog testmode (1 = no reboot), default=0 > -nowayout: Watchdog cannot be stopped once started > + timeout: > + Watchdog timeout in seconds (60..15300, default=60) > + testmode: > + Watchdog testmode (1 = no reboot), default=0 > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > wm831x_wdt: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > wm8350_wdt: > -nowayout: Watchdog cannot be stopped once started > + nowayout: > + Watchdog cannot be stopped once started > (default=kernel config parameter) > + > ------------------------------------------------- > + > sun4v_wdt: > -timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000) > -nowayout: Watchdog cannot be stopped once started > -------------------------------------------------- > + timeout_ms: > + Watchdog timeout in milliseconds 1..180000, default=60000) > + nowayout: > + Watchdog cannot be stopped once started > diff --git a/Documentation/watchdog/watchdog-pm.txt b/Documentation/watchdog/watchdog-pm.rst > similarity index 92% > rename from Documentation/watchdog/watchdog-pm.txt > rename to Documentation/watchdog/watchdog-pm.rst > index 7a4dd46e0d24..646e1f28f31f 100644 > --- a/Documentation/watchdog/watchdog-pm.txt > +++ b/Documentation/watchdog/watchdog-pm.rst > @@ -1,5 +1,7 @@ > +=============================================== > The Linux WatchDog Timer Power Management Guide > =============================================== > + > Last reviewed: 17-Dec-2018 > > Wolfram Sang > @@ -16,4 +18,5 @@ On resume, a watchdog timer shall be reset to its selected value to give > userspace enough time to resume. [1] [2] > > [1] https://patchwork.kernel.org/patch/10252209/ > + > [2] https://patchwork.kernel.org/patch/10711625/ > diff --git a/Documentation/watchdog/wdt.txt b/Documentation/watchdog/wdt.rst > similarity index 68% > rename from Documentation/watchdog/wdt.txt > rename to Documentation/watchdog/wdt.rst > index ed2f0b860869..d97b0361535b 100644 > --- a/Documentation/watchdog/wdt.txt > +++ b/Documentation/watchdog/wdt.rst > @@ -1,11 +1,14 @@ > +============================================================ > +WDT Watchdog Timer Interfaces For The Linux Operating System > +============================================================ > + > Last Reviewed: 10/05/2007 > > - WDT Watchdog Timer Interfaces For The Linux Operating System > - Alan Cox > +Alan Cox > > - ICS WDT501-P > - ICS WDT501-P (no fan tachometer) > - ICS WDT500-P > + - ICS WDT501-P > + - ICS WDT501-P (no fan tachometer) > + - ICS WDT500-P > > All the interfaces provide /dev/watchdog, which when open must be written > to within a timeout or the machine will reboot. Each write delays the reboot > @@ -21,19 +24,26 @@ degrees Fahrenheit. Each read returns a single byte giving the temperature. > The third interface logs kernel messages on additional alert events. > > The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to > -pass IO address and IRQ boot parameters. E.g.: > +pass IO address and IRQ boot parameters. E.g.:: > + > wdt.io=0x240 wdt.irq=11 > > Other "wdt" driver parameters are: > + > + =========== ====================================================== > heartbeat Watchdog heartbeat in seconds (default 60) > nowayout Watchdog cannot be stopped once started (kernel > - build parameter) > + build parameter) > tachometer WDT501-P Fan Tachometer support (0=disable, default=0) > type WDT501-P Card type (500 or 501, default=500) > + =========== ====================================================== > > Features > -------- > - WDT501P WDT500P > + > +================ ======= ======= > + WDT501P WDT500P > +================ ======= ======= > Reboot Timer X X > External Reboot X X > I/O Port Monitor o o > @@ -42,9 +52,12 @@ Fan Speed X o > Power Under X o > Power Over X o > Overheat X o > +================ ======= ======= > > The external event interfaces on the WDT boards are not currently supported. > Minor numbers are however allocated for it. > > > -Example Watchdog Driver: see samples/watchdog/watchdog-simple.c > +Example Watchdog Driver: > + > + see samples/watchdog/watchdog-simple.c > diff --git a/MAINTAINERS b/MAINTAINERS > index 08efe50266b5..a9abccb2644b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -7027,7 +7027,7 @@ F: drivers/media/usb/hdpvr/ > HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER > M: Jerry Hoemann > S: Supported > -F: Documentation/watchdog/hpwdt.txt > +F: Documentation/watchdog/hpwdt.rst > F: drivers/watchdog/hpwdt.c > > HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa) > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index ffe754539f5a..6cad0b33d7ad 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -18,7 +18,7 @@ menuconfig WATCHDOG > reboot the machine) and a driver for hardware watchdog boards, which > are more robust and can also keep track of the temperature inside > your computer. For details, read > - in the kernel source. > + in the kernel source. > > The watchdog is usually used together with the watchdog daemon > which is available from > @@ -1870,7 +1870,7 @@ config BOOKE_WDT > Watchdog driver for PowerPC Book-E chips, such as the Freescale > MPC85xx SOCs and the IBM PowerPC 440. > > - Please see Documentation/watchdog/watchdog-api.txt for > + Please see Documentation/watchdog/watchdog-api.rst for > more information. > > config BOOKE_WDT_DEFAULT_TIMEOUT > @@ -2019,7 +2019,7 @@ config PCWATCHDOG > This card simply watches your kernel to make sure it doesn't freeze, > and if it does, it reboots your computer after a certain amount of > time. This driver is like the WDT501 driver but for different > - hardware. Please read . The PC > + hardware. Please read . The PC > watchdog cards can be ordered from . > > To compile this driver as a module, choose M here: the > diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c > index 13c817ea1d6a..f5713030d0f7 100644 > --- a/drivers/watchdog/smsc37b787_wdt.c > +++ b/drivers/watchdog/smsc37b787_wdt.c > @@ -36,7 +36,7 @@ > * mknod /dev/watchdog c 10 130 > * > * For an example userspace keep-alive daemon, see: > - * Documentation/watchdog/wdt.txt > + * Documentation/watchdog/wdt.rst > */ > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt