Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Sun, 9 Jun 2019 23:10:26 +0200
From:   Greg KH <gregkh@linuxfoundation.org>
To:     Dragan Cvetic <draganc@xilinx.com>
Cc:     "arnd@arndb.de" <arnd@arndb.de>, Michal Simek <michals@xilinx.com>,
        "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>,
        "robh+dt@kernel.org" <robh+dt@kernel.org>,
        "mark.rutland@arm.com" <mark.rutland@arm.com>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Derek Kiernan <dkiernan@xilinx.com>
Subject: Re: [PATCH V5 02/11] misc: xilinx-sdfec: add core driver
Message-ID: <20190609211026.GA9859@kroah.com>
References: <1560038656-380620-1-git-send-email-dragan.cvetic@xilinx.com>
 <1560038656-380620-3-git-send-email-dragan.cvetic@xilinx.com>
 <20190609112235.GA16574@kroah.com>
 <CH2PR02MB6359778016A4BDCBD29EA275CB120@CH2PR02MB6359.namprd02.prod.outlook.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CH2PR02MB6359778016A4BDCBD29EA275CB120@CH2PR02MB6359.namprd02.prod.outlook.com>
User-Agent: Mutt/1.12.0 (2019-05-25)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Sun, Jun 09, 2019 at 06:48:31PM +0000, Dragan Cvetic wrote:
> 
> 
> > -----Original Message-----
> > From: Greg KH [mailto:gregkh@linuxfoundation.org]
> > Sent: Sunday 9 June 2019 12:23
> > To: Dragan Cvetic <draganc@xilinx.com>
> > Cc: arnd@arndb.de; Michal Simek <michals@xilinx.com>; linux-arm-kernel@lists.infradead.org; robh+dt@kernel.org;
> > mark.rutland@arm.com; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Derek Kiernan <dkiernan@xilinx.com>
> > Subject: Re: [PATCH V5 02/11] misc: xilinx-sdfec: add core driver
> > 
> > On Sun, Jun 09, 2019 at 01:04:07AM +0100, Dragan Cvetic wrote:
> > > Implement a platform driver that matches with xlnx,
> > > sd-fec-1.1 device tree node and registers as a character
> > > device, including:
> > > - SD-FEC driver binds to sdfec DT node.
> > > - creates and initialise an initial driver dev structure.
> > > - add the driver in Linux build and Kconfig.
> > >
> > > Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
> > > Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
> > > Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
> > > ---
> > >  drivers/misc/Kconfig        |  12 +++++
> > >  drivers/misc/Makefile       |   1 +
> > >  drivers/misc/xilinx_sdfec.c | 118 ++++++++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 131 insertions(+)
> > >  create mode 100644 drivers/misc/xilinx_sdfec.c
> > >
> > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> > > index 6b0417b..319a6bf 100644
> > > --- a/drivers/misc/Kconfig
> > > +++ b/drivers/misc/Kconfig
> > > @@ -471,6 +471,18 @@ config PCI_ENDPOINT_TEST
> > >             Enable this configuration option to enable the host side test driver
> > >             for PCI Endpoint.
> > >
> > > +config XILINX_SDFEC
> > > +	tristate "Xilinx SDFEC 16"
> > > +	help
> > > +	  This option enables support for the Xilinx SDFEC (Soft Decision
> > > +	  Forward Error Correction) driver. This enables a char driver
> > > +	  for the SDFEC.
> > > +
> > > +	  You may select this driver if your design instantiates the
> > > +	  SDFEC(16nm) hardened block. To compile this as a module choose M.
> > > +
> > > +	  If unsure, say N.
> > > +
> > >  config MISC_RTSX
> > >  	tristate
> > >  	default MISC_RTSX_PCI || MISC_RTSX_USB
> > > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> > > index b9affcd..0cb3546 100644
> > > --- a/drivers/misc/Makefile
> > > +++ b/drivers/misc/Makefile
> > > @@ -59,3 +59,4 @@ obj-$(CONFIG_OCXL)		+= ocxl/
> > >  obj-y				+= cardreader/
> > >  obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
> > >  obj-$(CONFIG_HABANA_AI)		+= habanalabs/
> > > +obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
> > > diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
> > > new file mode 100644
> > > index 0000000..75cc980
> > > --- /dev/null
> > > +++ b/drivers/misc/xilinx_sdfec.c
> > > @@ -0,0 +1,118 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Xilinx SDFEC
> > > + *
> > > + * Copyright (C) 2019 Xilinx, Inc.
> > > + *
> > > + * Description:
> > > + * This driver is developed for SDFEC16 (Soft Decision FEC 16nm)
> > > + * IP. It exposes a char device which supports file operations
> > > + * like  open(), close() and ioctl().
> > > + */
> > > +
> > > +#include <linux/miscdevice.h>
> > > +#include <linux/io.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of_platform.h>
> > > +#include <linux/poll.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/clk.h>
> > > +
> > > +static int xsdfec_ndevs;
> > 
> > You should use an idr for this, not just a number you bump up and down.
> > This will not work properly at all.
> > 
> > Think about this situation:
> > 	probe device 0
> > 	xsdfec_ndevs = 1
> > 	probe device 1
> > 	xsdfec_ndevs = 2
> > 	remove device 0
> > 	xsdfec_ndevs = 0
> > 	probe another device
> > 	misc device fails due to duplicate name.
> >
> 
> My bad.
> I can use idr, but couldn't be better optimized code if use simple mutex to protect the variable.

mutex does not protect from this at all, it's a logic bug.  Think about
adding 5 devices and then removing the 2nd one.  What is the number
assigned to the new device that is added afterward?

And you need a mutex for the idr anyway, if you are touching it in a non
probe/release callback way (those are already serialized by the bus
lock).

thanks,

greg k-h