Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Message-ID: <1560329205.3255.17.camel@mhfsdcap03>
Subject: Re: [PATCH] mtu3: fix setup packet response for HNP and SRP request
From:   Chunfeng Yun <chunfeng.yun@mediatek.com>
To:     Macpaul Lin <macpaul.lin@mediatek.com>
CC:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        <linux-usb@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-mediatek@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <wsd_upstream@mediatek.com>
Date:   Wed, 12 Jun 2019 16:46:45 +0800
In-Reply-To: <1560320892-30551-1-git-send-email-macpaul.lin@mediatek.com>
References: <1560320892-30551-1-git-send-email-macpaul.lin@mediatek.com>
Content-Type: text/plain; charset="UTF-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Macpaul,

On Wed, 2019-06-12 at 14:28 +0800, Macpaul Lin wrote:
> 1. Add OTG_HNP_REQD and OTG_SRP_REQD definitions in ch9.h.
> 2. When OTG_HNP_REQD and OTG_SRP_REQD has been received,
> usb hardware must not enter TEST mode but need to response setup packet.
> 3. Add otg_srp_reqd and otg_hnp_reqd in struct ssusb_mtk for futher
> implementation.
> 
> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> ---
>  drivers/usb/mtu3/mtu3.h            |  4 ++++
>  drivers/usb/mtu3/mtu3_gadget_ep0.c | 13 +++++++++++++
>  include/uapi/linux/usb/ch9.h       |  5 +++++
>  3 files changed, 22 insertions(+)
The driver currently doesn't support HNP/SRP, so there will be something
wrong when connected with PET to run compliance test, and I prefer not
to support it, because it's rarely used in normal case, thanks

> 
> diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
> index 76ecf12fdf62..bb8a31bc6e4d 100644
> --- a/drivers/usb/mtu3/mtu3.h
> +++ b/drivers/usb/mtu3/mtu3.h
> @@ -226,6 +226,8 @@ struct otg_switch_mtk {
>   * @dma_clk: dma_bus_ck clock for AXI bus etc
>   * @dr_mode: works in which mode:
>   *		host only, device only or dual-role mode
> + * @otg_srp_reqd: used for SRP request handling.
> + * @otg_hnp_reqd: used for HNP request handling.
>   * @u2_ports: number of usb2.0 host ports
>   * @u3_ports: number of usb3.0 host ports
>   * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
> @@ -252,6 +254,8 @@ struct ssusb_mtk {
>  	/* otg */
>  	struct otg_switch_mtk otg_switch;
>  	enum usb_dr_mode dr_mode;
> +	bool otg_srp_reqd;
> +	bool otg_hnp_reqd;
>  	bool is_host;
>  	int u2_ports;
>  	int u3_ports;
> diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
> index 4da216c99726..1247c43a63e6 100644
> --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
> +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
> @@ -285,11 +285,24 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
>  		dev_dbg(mtu->dev, "TEST_PACKET\n");
>  		mtu->test_mode_nr = TEST_PACKET_MODE;
>  		break;
> +	case OTG_SRP_REQD:
> +		dev_dbg(mtu->dev, "OTG_SRP_REQD\n");
> +		mtu->ssusb->otg_srp_reqd = 1;
> +		break;
> +	case OTG_HNP_REQD:
> +		dev_dbg(mtu->dev, "OTG_HNP_REQD\n");
> +		mtu->ssusb->otg_hnp_reqd = 1;
> +		break;
>  	default:
>  		handled = -EINVAL;
>  		goto out;
>  	}
>  
> +	if (mtu->ssusb->otg_srp_reqd || mtu->ssusb->otg_hnp_reqd) {
> +		mtu->ep0_state = MU3D_EP0_STATE_SETUP;
> +		goto out;
> +	}
> +
>  	mtu->test_mode = true;
>  
>  	/* no TX completion interrupt, and need restart platform after test */
> diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h
> index d5a5caec8fbc..545918c83fd1 100644
> --- a/include/uapi/linux/usb/ch9.h
> +++ b/include/uapi/linux/usb/ch9.h
> @@ -143,6 +143,11 @@
>  #define	TEST_SE0_NAK	3
>  #define	TEST_PACKET	4
>  #define	TEST_FORCE_EN	5
> +/*
> + * OTG HNP and SRP REQD
> + */
> +#define	OTG_SRP_REQD	6
> +#define	OTG_HNP_REQD	7
>  
>  /* Status Type */
>  #define USB_STATUS_TYPE_STANDARD	0