Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751211AbVKUWlF (ORCPT ); Mon, 21 Nov 2005 17:41:05 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751203AbVKUWlB (ORCPT ); Mon, 21 Nov 2005 17:41:01 -0500 Received: from mailhost.u-strasbg.fr ([130.79.200.152]:41209 "EHLO mailhost.u-strasbg.fr") by vger.kernel.org with ESMTP id S1751191AbVKUWk4 (ORCPT ); Mon, 21 Nov 2005 17:40:56 -0500 Message-ID: <43824C82.7090501@crc.u-strasbg.fr> Date: Mon, 21 Nov 2005 23:38:58 +0100 From: Philippe Pegon User-Agent: Mozilla Thunderbird 1.0.7 (X11/20051016) X-Accept-Language: en-us, en MIME-Version: 1.0 To: li@epp.agfa.com CC: linux-kernel@vger.kernel.org Subject: Re: 2.6.14.2 detects only one processor (out of 2) References: <20051121191109.GA6722@agfa.com> In-Reply-To: <20051121191109.GA6722@agfa.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0 (mailhost.u-strasbg.fr [IPv6:2001:660:2402::152]); Mon, 21 Nov 2005 23:40:46 +0100 (CET) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 45474 Lines: 1627 Hi, try with acpi enabled, it works for me. It's seem that recent kernel (since 2.6.12) need acpi for SMP. In my .config file : CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y -- Philippe Pegon Sidney Li wrote: > Hi, > > I recently compiled the new 2.6.14.2 kernel and ran into a problem. My PC > has two processors, and in the old kernel (2.6.11.8), both were detected and > used. In version 2.6.14.2, only one was detected and enabled. > > My configuration: > > Gnu C 3.3.5 > Gnu make 3.79.1 > binutils 2.14 > util-linux 2.12h > module-init-tools 3.0 > e2fsprogs 1.32 > Linux C Library 2.3.2 > Dynamic linker (ldd) 2.3.2 > Procps 3.2.4 > udev 039 > > > The initial message I got from booting the new kernel (2.6.14.2) shows > > Nov 21 12:23:34 li syslogd 1.4.1: restart. > Nov 21 12:23:34 li syslog: syslogd startup succeeded > Nov 21 12:23:34 li kernel: klogd 1.4.1, log source = /proc/kmsg started. > Nov 21 12:23:34 li kernel: Linux version 2.6.14.2 (root@li.agfa.com) (gcc version 3.3.5) #2 SMP PREEMPT Mon Nov 21 11:47:35 EST 2005 > Nov 21 12:23:34 li kernel: BIOS-provided physical RAM map: > Nov 21 12:23:34 li kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > Nov 21 12:23:34 li kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > Nov 21 12:23:34 li kernel: BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) > Nov 21 12:23:34 li kernel: BIOS-e820: 0000000000100000 - 000000001ef30000 (usable) > Nov 21 12:23:34 li kernel: BIOS-e820: 000000001ef30000 - 000000001ef40000 (ACPI data) > Nov 21 12:23:34 li kernel: BIOS-e820: 000000001ef40000 - 000000001eff0000 (ACPI NVS) > Nov 21 12:23:34 li kernel: BIOS-e820: 000000001eff0000 - 000000001f000000 (reserved) > Nov 21 12:23:34 li kernel: BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) > Nov 21 12:23:34 li kernel: BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) > Nov 21 12:23:34 li syslog: klogd startup succeeded > Nov 21 12:23:34 li kernel: 495MB LOWMEM available. > Nov 21 12:23:34 li kernel: found SMP MP-table at 000ff780 > Nov 21 12:23:34 li keytable: Loading keymap: > Nov 21 12:23:34 li keytable: > Nov 21 12:23:34 li keytable: Loading system font: > Nov 21 12:23:34 li keytable: > Nov 21 12:23:34 li rc: Starting keytable: succeeded > Nov 21 12:23:34 li kernel: DMI 2.3 present. > Nov 21 12:23:34 li kernel: Intel MultiProcessor Specification v1.4 > Nov 21 12:23:34 li kernel: Virtual Wire compatibility mode. > Nov 21 12:23:34 li kernel: OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000 > Nov 21 12:23:34 li random: Initializing random number generator: succeeded > Nov 21 12:23:34 li kernel: Processor #0 15:2 APIC version 20 > Nov 21 12:23:34 li kernel: I/O APIC #2 Version 32 at 0xFEC00000. > Nov 21 12:23:34 li kernel: Enabling APIC mode: Flat. Using 1 I/O APICs > Nov 21 12:23:34 li kernel: Processors: 1 > Nov 21 12:23:34 li kernel: Allocating PCI resources starting at 20000000 (gap: 1f000000:dfcf0000) > Nov 21 12:23:34 li kernel: Built 1 zonelists > Nov 21 12:23:34 li kernel: Kernel command line: BOOT_IMAGE=linux-2.6.14.2 ro root=342 > Nov 21 12:23:34 li kernel: Initializing CPU#0 > Nov 21 12:23:34 li kernel: PID hash table entries: 2048 (order: 11, 32768 bytes) > Nov 21 12:23:34 li kernel: Detected 2594.066 MHz processor. > Nov 21 12:23:34 li kernel: Using tsc for high-res timesource > Nov 21 12:23:34 li kernel: Console: colour VGA+ 80x25 > Nov 21 12:23:34 li kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Nov 21 12:23:34 li kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Nov 21 12:23:34 li kernel: Memory: 499432k/507072k available (1798k kernel code, 7148k reserved, 521k data, 184k init, 0k highmem) > Nov 21 12:23:35 li kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. > Nov 21 12:23:35 li kernel: Calibrating delay using timer specific routine.. 5192.30 BogoMIPS (lpj=2596150) > Nov 21 12:23:35 li kernel: Mount-cache hash table entries: 512 > Nov 21 12:23:35 li kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K > Nov 21 12:23:35 li kernel: CPU: L2 cache: 512K > Nov 21 12:23:35 li kernel: CPU: Physical Processor ID: 0 > Nov 21 12:23:35 li kernel: Intel machine check architecture supported. > Nov 21 12:23:35 li kernel: Intel machine check reporting enabled on CPU#0. > Nov 21 12:23:35 li kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available > Nov 21 12:23:35 li kernel: mtrr: v2.0 (20020519) > Nov 21 12:23:35 li kernel: Enabling fast FPU save and restore... done. > Nov 21 12:23:35 li kernel: Enabling unmasked SIMD FPU exception support... done. > Nov 21 12:23:35 li kernel: Checking 'hlt' instruction... OK. > Nov 21 12:23:35 li kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 > Nov 21 12:23:35 li kernel: Total of 1 processors activated (5192.30 BogoMIPS). > Nov 21 12:23:35 li kernel: ENABLING IO-APIC IRQs > Nov 21 12:23:35 li kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 > Nov 21 12:23:35 li kernel: Brought up 1 CPUs > ... > > The older kernel boots up as follows: > > Nov 21 12:26:05 li syslogd 1.4.1: restart. > Nov 21 12:26:05 li syslog: syslogd startup succeeded > Nov 21 12:26:05 li kernel: klogd 1.4.1, log source = /proc/kmsg started. > Nov 21 12:26:05 li kernel: Linux version 2.6.11.8 (root@li.agfa.com) (gcc version 3.3.5) #1 SMP Wed May 4 15:00:20 EDT 2005 > Nov 21 12:26:05 li kernel: BIOS-provided physical RAM map: > Nov 21 12:26:05 li kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > Nov 21 12:26:05 li kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > Nov 21 12:26:05 li kernel: BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) > Nov 21 12:26:05 li kernel: BIOS-e820: 0000000000100000 - 000000001ef30000 (usable) > Nov 21 12:26:05 li kernel: BIOS-e820: 000000001ef30000 - 000000001ef40000 (ACPI data) > Nov 21 12:26:05 li kernel: BIOS-e820: 000000001ef40000 - 000000001eff0000 (ACPI NVS) > Nov 21 12:26:05 li kernel: BIOS-e820: 000000001eff0000 - 000000001f000000 (reserved) > Nov 21 12:26:05 li kernel: BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) > Nov 21 12:26:05 li kernel: BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) > Nov 21 12:26:05 li syslog: klogd startup succeeded > Nov 21 12:26:05 li kernel: 495MB LOWMEM available. > Nov 21 12:26:05 li kernel: found SMP MP-table at 000ff780 > Nov 21 12:26:05 li keytable: Loading keymap: > Nov 21 12:26:05 li keytable: ^[[60G > Nov 21 12:26:05 li kernel: DMI 2.3 present. > Nov 21 12:26:05 li keytable: > Nov 21 12:26:05 li keytable: Loading system font: > Nov 21 12:26:05 li keytable: > Nov 21 12:26:05 li rc: Starting keytable: succeeded > Nov 21 12:26:05 li kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Nov 21 12:26:05 li kernel: Processor #0 15:2 APIC version 20 > Nov 21 12:26:05 li kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Nov 21 12:26:05 li random: Initializing random number generator: succeeded > Nov 21 12:26:05 li kernel: Processor #1 15:2 APIC version 20 > Nov 21 12:26:05 li kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > Nov 21 12:26:05 li kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) > Nov 21 12:26:05 li kernel: Using ACPI for processor (LAPIC) configuration information > Nov 21 12:26:05 li kernel: Intel MultiProcessor Specification v1.4 > Nov 21 12:26:05 li kernel: Virtual Wire compatibility mode. > Nov 21 12:26:05 li kernel: OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000 > Nov 21 12:26:05 li kernel: I/O APIC #2 Version 32 at 0xFEC00000. > Nov 21 12:26:05 li kernel: Enabling APIC mode: Flat. Using 1 I/O APICs > Nov 21 12:26:05 li kernel: Processors: 2 > Nov 21 12:26:05 li kernel: Allocating PCI resources starting at 1f000000 (gap: 1f000000:dfcf0000) > Nov 21 12:26:05 li kernel: Built 1 zonelists > Nov 21 12:26:05 li kernel: Kernel command line: BOOT_IMAGE=linux-2.6.11.8 ro root=342 > Nov 21 12:26:05 li kernel: Initializing CPU#0 > Nov 21 12:26:05 li kernel: PID hash table entries: 2048 (order: 11, 32768 bytes) > Nov 21 12:26:05 li kernel: Detected 2594.160 MHz processor. > Nov 21 12:26:05 li kernel: Using tsc for high-res timesource > Nov 21 12:26:05 li kernel: Console: colour VGA+ 80x25 > Nov 21 12:26:05 li kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Nov 21 12:26:05 li kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Nov 21 12:26:05 li kernel: Memory: 499268k/507072k available (1745k kernel code, 7308k reserved, 720k data, 196k init, 0k highmem) > Nov 21 12:26:05 li kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. > Nov 21 12:26:05 li kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > Nov 21 12:26:05 li kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K > Nov 21 12:26:06 li kernel: CPU: L2 cache: 512K > Nov 21 12:26:06 li kernel: CPU: Physical Processor ID: 0 > Nov 21 12:26:06 li kernel: Intel machine check architecture supported. > Nov 21 12:26:06 li kernel: Intel machine check reporting enabled on CPU#0. > Nov 21 12:26:06 li kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available > Nov 21 12:26:06 li kernel: Enabling fast FPU save and restore... done. > Nov 21 12:26:06 li kernel: Enabling unmasked SIMD FPU exception support... done. > Nov 21 12:26:06 li kernel: Checking 'hlt' instruction... OK. > Nov 21 12:26:06 li kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 > Nov 21 12:26:06 li kernel: per-CPU timeslice cutoff: 1462.73 usecs. > Nov 21 12:26:06 li kernel: task migration cache decay timeout: 2 msecs. > Nov 21 12:26:06 li kernel: Booting processor 1/1 eip 2000 > Nov 21 12:26:06 li kernel: Initializing CPU#1 > Nov 21 12:26:06 li kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K > Nov 21 12:26:06 li kernel: CPU: L2 cache: 512K > Nov 21 12:26:06 li kernel: CPU: Physical Processor ID: 0 > Nov 21 12:26:06 li kernel: Intel machine check architecture supported. > Nov 21 12:26:06 li kernel: Intel machine check reporting enabled on CPU#1. > Nov 21 12:26:06 li kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (12) available > Nov 21 12:26:06 li kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 > Nov 21 12:26:06 li kernel: Total of 2 processors activated (10305.53 BogoMIPS). > Nov 21 12:26:06 li kernel: ENABLING IO-APIC IRQs > Nov 21 12:26:06 li kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 > Nov 21 12:26:06 li kernel: checking TSC synchronization across 2 CPUs: passed. > Nov 21 12:26:06 li kernel: Brought up 2 CPUs > .... > > I've tried turning on and off hyperthreading (in the .config file and the > BIOS), and changing the CONFIG_HZ and CONFIG_HZ_100 settings, but the > new kernel still detects only one CPU. (I have RTC enabled). The complete > .config file is as follows: > > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.14.2 > # Mon Nov 21 13:23:15 2005 > # > CONFIG_X86=y > CONFIG_SEMAPHORE_SLEEPERS=y > CONFIG_MMU=y > CONFIG_UID16=y > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_IOMAP=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_CLEAN_COMPILE=y > CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > # CONFIG_POSIX_MQUEUE is not set > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > # CONFIG_AUDIT is not set > CONFIG_HOTPLUG=y > CONFIG_KOBJECT_UEVENT=y > # CONFIG_IKCONFIG is not set > # CONFIG_CPUSETS is not set > CONFIG_INITRAMFS_SOURCE="" > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_CC_ALIGN_FUNCTIONS=0 > CONFIG_CC_ALIGN_LABELS=0 > CONFIG_CC_ALIGN_LOOPS=0 > CONFIG_CC_ALIGN_JUMPS=0 > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_OBSOLETE_MODPARM=y > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > CONFIG_STOP_MACHINE=y > > # > # Processor type and features > # > CONFIG_X86_PC=y > # CONFIG_X86_ELAN is not set > # CONFIG_X86_VOYAGER is not set > # CONFIG_X86_NUMAQ is not set > # CONFIG_X86_SUMMIT is not set > # CONFIG_X86_BIGSMP is not set > # CONFIG_X86_VISWS is not set > # CONFIG_X86_GENERICARCH is not set > # CONFIG_X86_ES7000 is not set > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMII is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUMM is not set > CONFIG_MPENTIUM4=y > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MK8 is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MEFFICEON is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MGEODEGX1 is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_MVIAC3_2 is not set > # CONFIG_X86_GENERIC is not set > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_L1_CACHE_SHIFT=7 > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > CONFIG_X86_GOOD_APIC=y > CONFIG_X86_INTEL_USERCOPY=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > CONFIG_SMP=y > CONFIG_NR_CPUS=2 > # CONFIG_SCHED_SMT is not set > # CONFIG_PREEMPT_NONE is not set > # CONFIG_PREEMPT_VOLUNTARY is not set > CONFIG_PREEMPT=y > CONFIG_PREEMPT_BKL=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_TSC=y > CONFIG_X86_MCE=y > # CONFIG_X86_MCE_NONFATAL is not set > # CONFIG_X86_MCE_P4THERMAL is not set > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > # CONFIG_X86_REBOOTFIXUPS is not set > CONFIG_MICROCODE=m > CONFIG_X86_MSR=m > CONFIG_X86_CPUID=m > > # > # Firmware Drivers > # > # CONFIG_EDD is not set > # CONFIG_DELL_RBU is not set > CONFIG_DCDBAS=m > CONFIG_NOHIGHMEM=y > # CONFIG_HIGHMEM4G is not set > # CONFIG_HIGHMEM64G is not set > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > # CONFIG_SPARSEMEM_STATIC is not set > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > CONFIG_IRQBALANCE=y > # CONFIG_REGPARM is not set > CONFIG_SECCOMP=y > CONFIG_HZ_100=y > # CONFIG_HZ_250 is not set > # CONFIG_HZ_1000 is not set > CONFIG_HZ=100 > CONFIG_PHYSICAL_START=0x100000 > # CONFIG_KEXEC is not set > > # > # Power management options (ACPI, APM) > # > CONFIG_PM=y > # CONFIG_PM_DEBUG is not set > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > # CONFIG_ACPI is not set > > # > # APM (Advanced Power Management) BIOS Support > # > # CONFIG_APM is not set > > # > # CPU Frequency scaling > # > # CONFIG_CPU_FREQ is not set > > # > # Bus options (PCI, PCMCIA, EISA, MCA, ISA) > # > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GOMMCONFIG is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > # CONFIG_PCIEPORTBUS is not set > # CONFIG_PCI_MSI is not set > # CONFIG_PCI_LEGACY_PROC is not set > CONFIG_ISA_DMA_API=y > # CONFIG_ISA is not set > # CONFIG_MCA is not set > # CONFIG_SCx200 is not set > # CONFIG_HOTPLUG_CPU is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # PCI Hotplug Support > # > # CONFIG_HOTPLUG_PCI is not set > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > CONFIG_BINFMT_AOUT=m > CONFIG_BINFMT_MISC=m > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > CONFIG_NET_KEY=y > CONFIG_INET=y > # CONFIG_IP_MULTICAST is not set > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > CONFIG_INET_TUNNEL=m > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_BIC=y > > # > # IP: Virtual Server Configuration > # > # CONFIG_IP_VS is not set > # CONFIG_IPV6 is not set > CONFIG_NETFILTER=y > # CONFIG_NETFILTER_DEBUG is not set > # CONFIG_NETFILTER_NETLINK is not set > > # > # IP: Netfilter Configuration > # > # CONFIG_IP_NF_CONNTRACK is not set > # CONFIG_IP_NF_QUEUE is not set > CONFIG_IP_NF_IPTABLES=m > # CONFIG_IP_NF_MATCH_LIMIT is not set > # CONFIG_IP_NF_MATCH_IPRANGE is not set > # CONFIG_IP_NF_MATCH_MAC is not set > # CONFIG_IP_NF_MATCH_PKTTYPE is not set > # CONFIG_IP_NF_MATCH_MARK is not set > # CONFIG_IP_NF_MATCH_MULTIPORT is not set > # CONFIG_IP_NF_MATCH_TOS is not set > # CONFIG_IP_NF_MATCH_RECENT is not set > # CONFIG_IP_NF_MATCH_ECN is not set > # CONFIG_IP_NF_MATCH_DSCP is not set > # CONFIG_IP_NF_MATCH_AH_ESP is not set > # CONFIG_IP_NF_MATCH_LENGTH is not set > # CONFIG_IP_NF_MATCH_TTL is not set > # CONFIG_IP_NF_MATCH_TCPMSS is not set > # CONFIG_IP_NF_MATCH_OWNER is not set > # CONFIG_IP_NF_MATCH_ADDRTYPE is not set > # CONFIG_IP_NF_MATCH_REALM is not set > # CONFIG_IP_NF_MATCH_SCTP is not set > # CONFIG_IP_NF_MATCH_DCCP is not set > # CONFIG_IP_NF_MATCH_COMMENT is not set > # CONFIG_IP_NF_MATCH_HASHLIMIT is not set > # CONFIG_IP_NF_MATCH_STRING is not set > CONFIG_IP_NF_FILTER=m > # CONFIG_IP_NF_TARGET_REJECT is not set > # CONFIG_IP_NF_TARGET_LOG is not set > # CONFIG_IP_NF_TARGET_ULOG is not set > # CONFIG_IP_NF_TARGET_TCPMSS is not set > # CONFIG_IP_NF_TARGET_NFQUEUE is not set > # CONFIG_IP_NF_MANGLE is not set > # CONFIG_IP_NF_RAW is not set > # CONFIG_IP_NF_ARPTABLES is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > CONFIG_LLC=m > # CONFIG_LLC2 is not set > CONFIG_IPX=m > # CONFIG_IPX_INTERN is not set > CONFIG_ATALK=m > CONFIG_DEV_APPLETALK=y > # CONFIG_IPDDP is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_NET_SCHED is not set > # CONFIG_NET_CLS_ROUTE is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_IEEE80211 is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_FW_LOADER is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > # CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > CONFIG_PARPORT=m > CONFIG_PARPORT_PC=m > # CONFIG_PARPORT_SERIAL is not set > # CONFIG_PARPORT_PC_FIFO is not set > # CONFIG_PARPORT_PC_SUPERIO is not set > # CONFIG_PARPORT_GSC is not set > # CONFIG_PARPORT_1284 is not set > > # > # Plug and Play support > # > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_PARIDE is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=m > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=4096 > # CONFIG_BLK_DEV_INITRD is not set > # CONFIG_LBD is not set > # CONFIG_CDROM_PKTCDVD is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_ATA_OVER_ETH is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_IDE_SATA is not set > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > # CONFIG_IDEDISK_MULTI_MODE is not set > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > CONFIG_BLK_DEV_IDESCSI=m > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_IDE_GENERIC=y > CONFIG_BLK_DEV_CMD640=y > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > CONFIG_BLK_DEV_RZ1000=y > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_ATIIXP is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_SC1200 is not set > CONFIG_BLK_DEV_PIIX=m > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_ARM is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=m > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=m > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > CONFIG_BLK_DEV_SR=m > # CONFIG_BLK_DEV_SR_VENDOR is not set > CONFIG_CHR_DEV_SG=m > # CONFIG_CHR_DEV_SCH is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > CONFIG_SCSI_MULTI_LUN=y > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI Transport Attributes > # > # CONFIG_SCSI_SPI_ATTRS is not set > # CONFIG_SCSI_FC_ATTRS is not set > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_ATTRS is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > # CONFIG_SCSI_SATA is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_PPA is not set > # CONFIG_SCSI_IMM is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_QLA2XXX=m > # CONFIG_SCSI_QLA21XX is not set > # CONFIG_SCSI_QLA22XX is not set > # CONFIG_SCSI_QLA2300 is not set > # CONFIG_SCSI_QLA2322 is not set > # CONFIG_SCSI_QLA6312 is not set > # CONFIG_SCSI_QLA24XX is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_SPI is not set > # CONFIG_FUSION_FC is not set > # CONFIG_FUSION_SAS is not set > > # > # IEEE 1394 (FireWire) support > # > CONFIG_IEEE1394=m > > # > # Subsystem Options > # > # CONFIG_IEEE1394_VERBOSEDEBUG is not set > # CONFIG_IEEE1394_OUI_DB is not set > # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set > # CONFIG_IEEE1394_EXPORT_FULL_API is not set > > # > # Device Drivers > # > > # > # Texas Instruments PCILynx requires I2C > # > # CONFIG_IEEE1394_OHCI1394 is not set > > # > # Protocol Drivers > # > # CONFIG_IEEE1394_SBP2 is not set > # CONFIG_IEEE1394_ETH1394 is not set > # CONFIG_IEEE1394_RAWIO is not set > # CONFIG_IEEE1394_CMP is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > CONFIG_DUMMY=m > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > > # > # PHY device support > # > # CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > CONFIG_MII=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_CASSINI is not set > # CONFIG_NET_VENDOR_3COM is not set > > # > # Tulip family network device support > # > # CONFIG_NET_TULIP is not set > # CONFIG_HP100 is not set > CONFIG_NET_PCI=y > # CONFIG_PCNET32 is not set > # CONFIG_AMD8111_ETH is not set > # CONFIG_ADAPTEC_STARFIRE is not set > # CONFIG_B44 is not set > # CONFIG_FORCEDETH is not set > # CONFIG_DGRS is not set > # CONFIG_EEPRO100 is not set > CONFIG_E100=m > # CONFIG_FEALNX is not set > # CONFIG_NATSEMI is not set > # CONFIG_NE2K_PCI is not set > # CONFIG_8139CP is not set > # CONFIG_8139TOO is not set > # CONFIG_SIS900 is not set > # CONFIG_EPIC100 is not set > # CONFIG_SUNDANCE is not set > # CONFIG_TLAN is not set > # CONFIG_VIA_RHINE is not set > # CONFIG_NET_POCKET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SKGE is not set > # CONFIG_SK98LIN is not set > # CONFIG_VIA_VELOCITY is not set > # CONFIG_TIGON3 is not set > # CONFIG_BNX2 is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_CHELSIO_T1 is not set > # CONFIG_IXGB is not set > # CONFIG_S2IO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PLIP is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_NET_FC is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > # CONFIG_INPUT_EVDEV is not set > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > CONFIG_INPUT_MISC=y > CONFIG_INPUT_PCSPKR=m > # CONFIG_INPUT_UINPUT is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > CONFIG_SERIO_SERPORT=m > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PARKBD is not set > # CONFIG_SERIO_PCIPS2 is not set > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=m > CONFIG_SERIAL_8250_NR_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=m > # CONFIG_SERIAL_JSM is not set > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > CONFIG_PRINTER=m > # CONFIG_LP_CONSOLE is not set > # CONFIG_PPDEV is not set > # CONFIG_TIPAR is not set > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_HW_RANDOM is not set > CONFIG_NVRAM=m > CONFIG_RTC=y > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > > # > # Ftape, the floppy tape device driver > # > CONFIG_AGP=m > # CONFIG_AGP_ALI is not set > # CONFIG_AGP_ATI is not set > # CONFIG_AGP_AMD is not set > # CONFIG_AGP_AMD64 is not set > CONFIG_AGP_INTEL=m > # CONFIG_AGP_NVIDIA is not set > # CONFIG_AGP_SIS is not set > # CONFIG_AGP_SWORKS is not set > # CONFIG_AGP_VIA is not set > # CONFIG_AGP_EFFICEON is not set > CONFIG_DRM=m > # CONFIG_DRM_TDFX is not set > # CONFIG_DRM_R128 is not set > # CONFIG_DRM_RADEON is not set > CONFIG_DRM_I810=m > CONFIG_DRM_I830=m > CONFIG_DRM_I915=m > # CONFIG_DRM_MGA is not set > # CONFIG_DRM_SIS is not set > # CONFIG_DRM_VIA is not set > # CONFIG_DRM_SAVAGE is not set > # CONFIG_MWAVE is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_HANGCHECK_TIMER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > CONFIG_HWMON=y > # CONFIG_HWMON_VID is not set > # CONFIG_SENSORS_HDAPS is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Misc devices > # > # CONFIG_IBM_ASM is not set > > # > # Multimedia Capabilities Port drivers > # > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > > # > # Graphics support > # > # CONFIG_FB is not set > # CONFIG_VIDEO_SELECT is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_DUMMY_CONSOLE=y > > # > # Sound > # > CONFIG_SOUND=y > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=y > CONFIG_SND_TIMER=y > CONFIG_SND_PCM=y > CONFIG_SND_SEQUENCER=m > # CONFIG_SND_SEQ_DUMMY is not set > CONFIG_SND_OSSEMUL=y > CONFIG_SND_MIXER_OSS=y > CONFIG_SND_PCM_OSS=y > CONFIG_SND_SEQUENCER_OSS=y > CONFIG_SND_RTCTIMER=y > CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > # CONFIG_SND_DUMMY is not set > # CONFIG_SND_VIRMIDI is not set > # CONFIG_SND_MTPAV is not set > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > CONFIG_SND_AC97_CODEC=m > CONFIG_SND_AC97_BUS=m > > # > # PCI devices > # > # CONFIG_SND_ALI5451 is not set > # CONFIG_SND_ATIIXP is not set > # CONFIG_SND_ATIIXP_MODEM is not set > # CONFIG_SND_AU8810 is not set > # CONFIG_SND_AU8820 is not set > # CONFIG_SND_AU8830 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_BT87X is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_EMU10K1X is not set > # CONFIG_SND_CA0106 is not set > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_MIXART is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_HDSP is not set > # CONFIG_SND_HDSPM is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_YMFPCI is not set > # CONFIG_SND_AD1889 is not set > # CONFIG_SND_ALS4000 is not set > # CONFIG_SND_CMIPCI is not set > # CONFIG_SND_ENS1370 is not set > # CONFIG_SND_ENS1371 is not set > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_FM801 is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > CONFIG_SND_INTEL8X0=m > # CONFIG_SND_INTEL8X0M is not set > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VIA82XX_MODEM is not set > # CONFIG_SND_VX222 is not set > # CONFIG_SND_HDA_INTEL is not set > > # > # USB devices > # > # CONFIG_SND_USB_AUDIO is not set > # CONFIG_SND_USB_USX2Y is not set > > # > # Open Sound System > # > # CONFIG_SOUND_PRIME is not set > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB=m > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_SUSPEND is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=m > # CONFIG_USB_EHCI_SPLIT_ISO is not set > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set > # CONFIG_USB_ISP116X_HCD is not set > CONFIG_USB_OHCI_HCD=m > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > CONFIG_USB_UHCI_HCD=m > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set > # CONFIG_USB_BLUETOOTH_TTY is not set > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information > # > CONFIG_USB_STORAGE=m > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_USBAT is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > > # > # USB Input Devices > # > CONFIG_USB_HID=m > CONFIG_USB_HIDINPUT=y > # CONFIG_HID_FF is not set > # CONFIG_USB_HIDDEV is not set > > # > # USB HID Boot Protocol drivers > # > # CONFIG_USB_KBD is not set > # CONFIG_USB_MOUSE is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_ACECAD is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_MTOUCH is not set > # CONFIG_USB_ITMTOUCH is not set > # CONFIG_USB_EGALAX is not set > # CONFIG_USB_YEALINK is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # CONFIG_USB_KEYSPAN_REMOTE is not set > # CONFIG_USB_APPLETOUCH is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB Multimedia devices > # > # CONFIG_USB_DABUSB is not set > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > CONFIG_USB_MON=y > > # > # USB port drivers > # > # CONFIG_USB_USS720 is not set > > # > # USB Serial Converter support > # > CONFIG_USB_SERIAL=m > CONFIG_USB_SERIAL_GENERIC=y > # CONFIG_USB_SERIAL_AIRPRIME is not set > # CONFIG_USB_SERIAL_BELKIN is not set > # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set > # CONFIG_USB_SERIAL_CP2101 is not set > # CONFIG_USB_SERIAL_CYPRESS_M8 is not set > # CONFIG_USB_SERIAL_EMPEG is not set > # CONFIG_USB_SERIAL_FTDI_SIO is not set > # CONFIG_USB_SERIAL_VISOR is not set > # CONFIG_USB_SERIAL_IPAQ is not set > # CONFIG_USB_SERIAL_IR is not set > # CONFIG_USB_SERIAL_EDGEPORT is not set > # CONFIG_USB_SERIAL_EDGEPORT_TI is not set > # CONFIG_USB_SERIAL_GARMIN is not set > # CONFIG_USB_SERIAL_IPW is not set > # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set > # CONFIG_USB_SERIAL_KEYSPAN is not set > # CONFIG_USB_SERIAL_KLSI is not set > # CONFIG_USB_SERIAL_KOBIL_SCT is not set > # CONFIG_USB_SERIAL_MCT_U232 is not set > # CONFIG_USB_SERIAL_PL2303 is not set > # CONFIG_USB_SERIAL_HP4X is not set > # CONFIG_USB_SERIAL_SAFE is not set > # CONFIG_USB_SERIAL_TI is not set > # CONFIG_USB_SERIAL_CYBERJACK is not set > # CONFIG_USB_SERIAL_XIRCOM is not set > # CONFIG_USB_SERIAL_OMNINET is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGETKIT is not set > # CONFIG_USB_PHIDGETSERVO is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TEST is not set > > # > # USB DSL modem support > # > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # InfiniBand support > # > # CONFIG_INFINIBAND is not set > > # > # SN Devices > # > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > # CONFIG_EXT3_FS_POSIX_ACL is not set > # CONFIG_EXT3_FS_SECURITY is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > # CONFIG_FS_POSIX_ACL is not set > # CONFIG_XFS_FS is not set > # CONFIG_MINIX_FS is not set > CONFIG_ROMFS_FS=m > CONFIG_INOTIFY=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > # CONFIG_AUTOFS_FS is not set > CONFIG_AUTOFS4_FS=m > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=m > CONFIG_JOLIET=y > # CONFIG_ZISOFS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=m > CONFIG_MSDOS_FS=m > CONFIG_VFAT_FS=m > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > CONFIG_NTFS_FS=m > # CONFIG_NTFS_DEBUG is not set > # CONFIG_NTFS_RW is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_HUGETLBFS is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > # CONFIG_RELAYFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > CONFIG_CRAMFS=m > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=m > # CONFIG_NFS_V3 is not set > # CONFIG_NFS_V4 is not set > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=m > # CONFIG_NFSD_V3 is not set > # CONFIG_NFSD_TCP is not set > CONFIG_LOCKD=m > CONFIG_EXPORTFS=m > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=m > # CONFIG_RPCSEC_GSS_KRB5 is not set > # CONFIG_RPCSEC_GSS_SPKM3 is not set > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=m > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > CONFIG_NLS_CODEPAGE_936=m > CONFIG_NLS_CODEPAGE_950=m > CONFIG_NLS_CODEPAGE_932=m > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > CONFIG_NLS_ASCII=m > CONFIG_NLS_ISO8859_1=m > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > CONFIG_NLS_ISO8859_15=m > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=m > > # > # Profiling support > # > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > # CONFIG_DEBUG_KERNEL is not set > CONFIG_LOG_BUF_SHIFT=15 > CONFIG_DEBUG_BUGVERBOSE=y > CONFIG_EARLY_PRINTK=y > CONFIG_X86_FIND_SMP_CONFIG=y > CONFIG_X86_MPPARSE=y > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > CONFIG_CRYPTO=y > # CONFIG_CRYPTO_HMAC is not set > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_MD4 is not set > # CONFIG_CRYPTO_MD5 is not set > # CONFIG_CRYPTO_SHA1 is not set > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_WP512 is not set > CONFIG_CRYPTO_TGR192=m > # CONFIG_CRYPTO_DES is not set > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_TWOFISH is not set > # CONFIG_CRYPTO_SERPENT is not set > CONFIG_CRYPTO_AES_586=m > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_ARC4 is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_ANUBIS is not set > # CONFIG_CRYPTO_DEFLATE is not set > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_CRC32C is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Hardware crypto devices > # > # CONFIG_CRYPTO_DEV_PADLOCK is not set > > # > # Library routines > # > CONFIG_CRC_CCITT=m > CONFIG_CRC16=m > CONFIG_CRC32=m > # CONFIG_LIBCRC32C is not set > CONFIG_ZLIB_INFLATE=m > CONFIG_GENERIC_HARDIRQS=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_GENERIC_PENDING_IRQ=y > CONFIG_X86_SMP=y > CONFIG_X86_HT=y > CONFIG_X86_BIOS_REBOOT=y > CONFIG_X86_TRAMPOLINE=y > CONFIG_PC=y > > ---------------------------------------------------------------- > > The output from /proc/cpuinfo is (under the older kernel): > > processor : 0 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) Pentium(R) 4 CPU 2.60GHz > stepping : 9 > cpu MHz : 2594.050 > cache size : 512 KB > physical id : 0 > siblings : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr > bogomips : 5128.19 > > processor : 1 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) Pentium(R) 4 CPU 2.60GHz > stepping : 9 > cpu MHz : 2594.050 > cache size : 512 KB > physical id : 0 > siblings : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr > bogomips : 5177.34 > > > In the newer kernel, /proc/cpuinfo only shows one CPU. > > Best Regards, > > Sidney Li > li@epp.agfa.com > sidneyli@osa.org > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/