Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Steve Twiss <stwiss.opensource@diasemi.com>
Date:   Wed, 19 Jun 2019 17:35:00 +0100
Subject: [PATCH V3] regulator: da9061/62: Adjust LDO voltage selection minimum
 value
To:     Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        "Lee Jones" <lee.jones@linaro.org>,
        Felix Riemann <Felix.Riemann@sma.de>
CC:     Support Opensource <support.opensource@diasemi.com>,
        LKML <linux-kernel@vger.kernel.org>
Message-ID: <20190619163457.A35B73FB46@swsrvapps-01.diasemi.com>
MIME-Version: 1.0
Content-Type: text/plain
X-KSE-AttachmentFiltering-Interceptor-Info: protection disabled
X-KSE-ServerInfo: sw-ex-cashub01.diasemi.com, 9
X-KSE-Antivirus-Interceptor-Info: scan successful
X-KSE-Antivirus-Info: Clean, bases: 19/06/2019 15:11:00
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

From: Felix Riemann <felix.riemann@sma.de>

According to the DA9061 and DA9062 datasheets the LDO voltage selection
registers have a lower value of 0x02. This applies to voltage registers
VLDO1_A, VLDO2_A, VLDO3_A and VLDO4_A. This linear offset of 0x02 was
previously not observed by the driver, causing the LDO output voltage to
be systematically lower by two steps (= 0.1V).

This patch fixes the minimum linear selector offset by setting it to a
value of 2 and increases the n_voltages by the same amount allowing
voltages in the range 0x02 -> 0.9V to 0x38 -> 3.6V to be correctly
selected. Also fixes an incorrect calculaton for the n_voltages value in
the regulator LDO2.

These fixes effect all LDO regulators for DA9061 and DA9062.

Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
---

Hi Mark,

I've added my signed-off tag to the commit patch of V3.

Regards,
Steve

 drivers/regulator/da9062-regulator.c | 40 +++++++++++++++++++++---------------
 include/linux/mfd/da9062/registers.h |  3 +++
 2 files changed, 27 insertions(+), 16 deletions(-)

diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index a02e048..1cadaae 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -493,12 +493,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO1_CONT,
 		.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO1_A,
 		.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO1_A,
 			__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
@@ -525,12 +526,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (600))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO2_CONT,
 		.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO2_A,
 		.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO2_A,
 			__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
@@ -557,12 +559,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO3_CONT,
 		.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO3_A,
 		.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO3_A,
 			__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
@@ -589,12 +592,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO4_CONT,
 		.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO4_A,
 		.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO4_A,
 			__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
@@ -769,12 +773,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO1_CONT,
 		.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO1_A,
 		.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO1_A,
 			__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
@@ -801,12 +806,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (600))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO2_CONT,
 		.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO2_A,
 		.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO2_A,
 			__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
@@ -833,12 +839,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO3_CONT,
 		.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO3_A,
 		.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO3_A,
 			__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
@@ -865,12 +872,13 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
 		.desc.ops = &da9062_ldo_ops,
 		.desc.min_uV = (900) * 1000,
 		.desc.uV_step = (50) * 1000,
-		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1
+				+ DA9062AA_VLDO_A_MIN_SEL,
 		.desc.enable_reg = DA9062AA_LDO4_CONT,
 		.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
 		.desc.vsel_reg = DA9062AA_VLDO4_A,
 		.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
-		.desc.linear_min_sel = 0,
+		.desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
 		.sleep = REG_FIELD(DA9062AA_VLDO4_A,
 			__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
 			sizeof(unsigned int) * 8 -
diff --git a/include/linux/mfd/da9062/registers.h b/include/linux/mfd/da9062/registers.h
index fe04b70..090213a 100644
--- a/include/linux/mfd/da9062/registers.h
+++ b/include/linux/mfd/da9062/registers.h
@@ -797,6 +797,9 @@
 #define DA9062AA_BUCK3_SL_A_SHIFT	7
 #define DA9062AA_BUCK3_SL_A_MASK	BIT(7)
 
+/* DA9062AA_VLDO[1-4]_A common */
+#define DA9062AA_VLDO_A_MIN_SEL		2
+
 /* DA9062AA_VLDO1_A = 0x0A9 */
 #define DA9062AA_VLDO1_A_SHIFT		0
 #define DA9062AA_VLDO1_A_MASK		0x3f
-- 
1.9.3