Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Sun, 23 Jun 2019 11:08:24 +0100
From:   Russell King - ARM Linux admin <linux@armlinux.org.uk>
To:     Parshuram Thombare <pthombar@cadence.com>
Cc:     andrew@lunn.ch, nicolas.ferre@microchip.com, davem@davemloft.net,
        f.fainelli@gmail.com, netdev@vger.kernel.org, hkallweit1@gmail.com,
        linux-kernel@vger.kernel.org, rafalc@cadence.com,
        aniljoy@cadence.com, piotrs@cadence.com
Subject: Re: [PATCH v4 1/5] net: macb: add phylink support
Message-ID: <20190623100824.3xlmkofiqebdf4sa@shell.armlinux.org.uk>
References: <1561281419-6030-1-git-send-email-pthombar@cadence.com>
 <1561281457-6886-1-git-send-email-pthombar@cadence.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1561281457-6886-1-git-send-email-pthombar@cadence.com>
User-Agent: NeoMutt/20170113 (1.7.2)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Sun, Jun 23, 2019 at 10:17:37AM +0100, Parshuram Thombare wrote:
> +	switch (state->interface) {
> +	case PHY_INTERFACE_MODE_GMII:
> +	case PHY_INTERFACE_MODE_RGMII:
> +		if (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE) {
> +			phylink_set(mask, 1000baseT_Full);
> +			phylink_set(mask, 1000baseX_Full);
> +			if (!(bp->caps & MACB_CAPS_NO_GIGABIT_HALF)) {
> +				phylink_set(mask, 1000baseT_Half);
> +				phylink_set(mask, 1000baseT_Half);

I think this can be cleaned up.

> +			}
> +		}
> +	/* fallthrough */
> +	case PHY_INTERFACE_MODE_MII:
> +	case PHY_INTERFACE_MODE_RMII:
> +		phylink_set(mask, 10baseT_Half);
> +		phylink_set(mask, 10baseT_Full);
> +		phylink_set(mask, 100baseT_Half);
> +		phylink_set(mask, 100baseT_Full);
> +		break;
> +	default:
> +		break;
> +	}
>  
> -	spin_lock_irqsave(&bp->lock, flags);
> +	linkmode_and(supported, supported, mask);
> +	linkmode_and(state->advertising, state->advertising, mask);
>  

You remove this blank line in the next patch, so given that this is a
new function, you might as well clean that up in this patch.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up