Received: by 2002:a25:ad19:0:0:0:0:0 with SMTP id y25csp3315295ybi; Tue, 2 Jul 2019 05:52:43 -0700 (PDT) X-Google-Smtp-Source: APXvYqx9b5M0jUdR7ac7QIMbZmjCP6Z7/L8YXVfpgN+I4Wn4lPJRoCMW7O2NOFtuwwV+aowpj7xc X-Received: by 2002:a17:90a:f498:: with SMTP id bx24mr5528071pjb.91.1562071963383; Tue, 02 Jul 2019 05:52:43 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1562071963; cv=none; d=google.com; s=arc-20160816; b=kGqH4y2jTRtThVDp+rnHuYLBBrDkI6BiyNhFb8IV08E9xyx6kcvFDHVFiBwcBlnCUU ldEBmQK8ug2n4yFQx8wxuW1l38WsueaSIb/bw9yGL++jaLTWWHI7ECEUd2/j+Nj1YjHn tCCmIANe4MStD5LDByDjwQIo1feduwBlwBKETnEHeOpGLM77m1E1nLuT0u5hT98c1dL0 AaLGi7sEXzcAyOIC6+gkvkWreR+7iBgpCL5XZWKJvkMkMEd4l6WsTyOvGeln9wk0o5pE tUq0mRBNwx3XslHMZHTywEDskzEmq5clXNIquQq1w8TRqWnSQYb4Us+ohUgyM59Oz3pw 87fg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:user-agent:in-reply-to :content-transfer-encoding:content-disposition:mime-version :references:message-id:subject:cc:to:from:date; bh=/S+1ykbjfsXFghVr28e3n/POUt5cFGh+uDt14U9NiCw=; b=XKxHunzwo8eQnlc9Afn+S4kKV6yqzguIUxAASD40OCTuNXIL43DeEJwYoOA0/S1igD FVP518h4Y/As3vJCMMLu66TYphpmKZqcc+IU2uqH0Y1728UdcqNQ3a4crLGM33+8OEdS FkUIXrIOA6tJ5umySVr4CpQOiTcuAL+V0QXtl3MlpaWvHCWbcRQXYRes8OC9QIQBBSVn Ru24KLq483USpbALZTYL/lbZQv2g8ehugha4PtuBxLHOnHhX9jrozKvGmTfqAP6DoM7u XNTn8ce2AG3taHfRO3UkWRVdysQsr9cuda4cnGORmCjMjo9HCHYTBlzH/t8x48PdfNB8 BGQQ== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id s36si12945363pld.164.2019.07.02.05.52.28; Tue, 02 Jul 2019 05:52:43 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726820AbfGBMvp (ORCPT + 99 others); Tue, 2 Jul 2019 08:51:45 -0400 Received: from metis.ext.pengutronix.de ([85.220.165.71]:54051 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726623AbfGBMvp (ORCPT ); Tue, 2 Jul 2019 08:51:45 -0400 Received: from pty.hi.pengutronix.de ([2001:67c:670:100:1d::c5]) by metis.ext.pengutronix.de with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1hiIFz-000215-JW; Tue, 02 Jul 2019 14:51:35 +0200 Received: from mfe by pty.hi.pengutronix.de with local (Exim 4.89) (envelope-from ) id 1hiIFy-00041o-2A; Tue, 02 Jul 2019 14:51:34 +0200 Date: Tue, 2 Jul 2019 14:51:34 +0200 From: Marco Felsch To: Igor Opaniuk Cc: "mark.rutland@arm.com" , "devicetree@vger.kernel.org" , Marcel Ziswiler , Fabio Estevam , "s.hauer@pengutronix.de" , "linux-kernel@vger.kernel.org" , Stefan Agner , "robh+dt@kernel.org" , "linux-imx@nxp.com" , "kernel@pengutronix.de" , Shawn Guo , Linux ARM , Marcel Ziswiler Subject: Re: [PATCH v2 1/1] ARM: dts: colibri: introduce dts with UHS-I support enabled Message-ID: <20190702125134.4m5fvdcpuqlrg6ek@pengutronix.de> References: <20190514143826.7331-1-igor.opaniuk@toradex.com> <20190702072631.zbd4tovt2amlxnpn@pengutronix.de> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: X-Sent-From: Pengutronix Hildesheim X-URL: http://www.pengutronix.de/ X-IRC: #ptxdist @freenode X-Accept-Language: de,en X-Accept-Content-Type: text/plain X-Uptime: 13:59:22 up 45 days, 18:17, 50 users, load average: 0.13, 0.06, 0.01 User-Agent: NeoMutt/20170113 (1.7.2) X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::c5 X-SA-Exim-Mail-From: mfe@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Igor, On 19-07-02 09:42, Igor Opaniuk wrote: > Hi Marco, > > On Tue, Jul 2, 2019 at 10:27 AM Marco Felsch wrote: > > > > Hi Igor, > > > > On 19-05-14 17:38, Igor Opaniuk wrote: > > > Introduce DTS for Colibri iMX6S/DL V1.1x re-design, where UHS-I support was > > > added. Provide proper configuration for VGEN3, which allows that rail to > > > be automatically switched to 1.8 volts for proper UHS-I operation mode. > > > > > > Signed-off-by: Igor Opaniuk > > > --- > > > > > > v2: > > > - rework hierarchy of dts files, and a separate dtsi for Colibri > > > iMX6S/DL V1.1x re-design, where UHS-I was added > > > - add comments about vgen3 power rail > > > - fix other minor issues, addressing Marcel's comments. > > > > > > arch/arm/boot/dts/Makefile | 1 + > > > .../boot/dts/imx6dl-colibri-v1.1-eval-v3.dts | 220 +++++ > > > arch/arm/boot/dts/imx6qdl-colibri-v1.1.dtsi | 852 ++++++++++++++++++ > > > 3 files changed, 1073 insertions(+) > > > create mode 100644 arch/arm/boot/dts/imx6dl-colibri-v1.1-eval-v3.dts > > > create mode 100644 arch/arm/boot/dts/imx6qdl-colibri-v1.1.dtsi > > > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > > index dab2914fa293..dc4ea05c8e2a 100644 > > > --- a/arch/arm/boot/dts/Makefile > > > +++ b/arch/arm/boot/dts/Makefile > > > @@ -401,6 +401,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > > > imx6dl-aristainetos2_4.dtb \ > > > imx6dl-aristainetos2_7.dtb \ > > > imx6dl-colibri-eval-v3.dtb \ > > > + imx6dl-colibri-v1.1-eval-v3.dtb \ > > > > I don't know the style convention but xxx-v1.1-eval-v3.dtb seems weird > > to me. > > This was done intentionally. The first version (v1.1) is for SoM, the > second one (v3) > is for a carrier board. There is an explanation below. I mean the point between the v1.1 maybe this should be v11 or v1_1. > > > > > imx6dl-cubox-i.dtb \ > > > imx6dl-cubox-i-emmc-som-v15.dtb \ > > > imx6dl-cubox-i-som-v15.dtb \ > > > diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1.1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1.1-eval-v3.dts > > > new file mode 100644 > > > index 000000000000..8ed7a528e7c7 > > > --- /dev/null > > > +++ b/arch/arm/boot/dts/imx6dl-colibri-v1.1-eval-v3.dts > > > @@ -0,0 +1,220 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ OR X11 > > > +/* > > > + * Copyright 2019 Toradex AG > > > + */ > > > + > > > +/dts-v1/; > > > + > > > +#include > > > +#include > > > +#include "imx6dl.dtsi" > > > +#include "imx6qdl-colibri-v1.1.dtsi" > > > > Same here.. > > > > Why you don't use the exsiting "imx6qdl-colibri.dtsi"? The > > "imx6qdl-colibri-v1.1.dtsi" would be a lot of boilerplate code. Instead > > you can use the existing one and apply your changes. I don't know why > > the vgen3 node isn't available currently but you can add them without > > worries. Just drop the boot-default-on property within the the dtsi. Why > > do you need this at all? > > > > I checked the v1.1 and the v1 DTS to and this is exactly the same code. > > So you can avoid even more code and improve maintainability. > > > > I would do something like this: > > This was done already for v1, and there was a discussion about that [1]. > The problem is that it brakes the earlier defined hierarchy of device tree > sources [2]. Can you provide me the link please? > Currently we have 3 levels: > 1. SoC level: imx6qdl.dtsi(all iMX6 SoCs) and imx6dl.dtsi (iMX6DL/S SoCs), > that contain CPU/GPU configuration, all common peripherals configuration. > 2. SoM level: imx6qdl-colibri.dtsi common configuration (pinmuxes, UART), > common on module peripherals > 3. Carrier board level: imx6dl-colibri-v1.1-eval-v3.dts specific carrier board > configuration (where eval-v3 is the name and the version of a carrier board) I know that kind of hierarchy ;) > The UHS-I feature was not present on V1.0x Colibri iMX6 modules > but got only added later as part of the V1.1x re-design. For this > purposes I added > imx6qdl-colibri-v1.1.dtsi for this particular re-designed version. The vgen3 regulator node can be available in the imx6qdl-colibri.dtsi even if it isn't used on the v1.0. The comment should highlight that. > Another issue is that a proper pinctrl and power configuration should > be provided for usdhc1 to support UHS-I feature, which is done in Carier > board-level, this is why a separate DTS file (specifically for > Colibri iMX6 v1.1 SoM) was introduced. The last dts node will override/expand the underlying nodes. The 'no-1-8-v' should be moved to the v1.0 dts or you need to add '/delete-property/ no-1-8-v' to your v1.1 dts. All other properties will exapand the node. > I understand your objection here, but unfortunately I have to follow > this hierarchy. Pleas check my above comments. Your patche duplicates a lot of code which is common. > As a trade-off some common parts can be moved to SoM-level common dtsi file, > something like imx6qdl-colibri-common.dtsi, and then introduce two dtsi files > for 1.0 and 1.1 versions of this SoM(imx6qdl-colibri-v1.0.dtsi and > imx6qdl-colibri-v1.1.dtsi > accordingly). Please check my above comments. Regards, Marco > > > > 8<------------------------------------------------- > > // SPDX-License-Identifier: GPL-2.0+ OR X11 > > /* > > * Copyright 2019 Toradex AG > > */ > > > > #inculde "imx6dl-colibri-eval-v3.dts" > > > > / { > > model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; > > }; > > > > &iomuxc { > > pinctrl_usdhc1_100mhz: usdhc1grp100mhz { > > fsl,pins = < > > MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 > > MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 > > MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 > > MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 > > MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 > > MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 > > >; > > }; > > > > pinctrl_usdhc1_200mhz: usdhc1grp200mhz { > > fsl,pins = < > > MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 > > MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 > > MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 > > MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 > > MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 > > MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 > > >; > > }; > > }; > > > > /* Colibri MMC */ > > &usdhc1 { > > pinctrl-names = "default", "state_100mhz", "state_200mhz"; > > pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; > > pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; > > pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; > > vmmc-supply = <®_module_3v3>; > > vqmmc-supply = <&vgen3_reg>; > > bus-width = <4>; > > cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ > > disable-wp; > > enable-sdio-wakeup; > > keep-power-in-suspend; > > sd-uhs-sdr12; > > sd-uhs-sdr25; > > sd-uhs-sdr50; > > sd-uhs-sdr104; > > status = "disabled"; > > }; > > 8<------------------------------------------------- > > > > The vgen3_reg update should be done on the imx6qdl-colibri.dtsi. > > > > I hope this will help you. > > > > Regards, > > Marco > > > > > + > > > +/ { > > > + model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; > > > + compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", > > > + "fsl,imx6dl"; > > > + > > > + /* Will be filled by the bootloader */ > > > + memory@10000000 { > > > + device_type = "memory"; > > > + reg = <0x10000000 0>; > > > + }; > > > + > > > + aliases { > > > + i2c0 = &i2c2; > > > + i2c1 = &i2c3; > > > + }; > > > + > > > + aliases { > > > + rtc0 = &rtc_i2c; > > > + rtc1 = &snvs_rtc; > > > + }; > > > + > > > + chosen { > > > + stdout-path = "serial0:115200n8"; > > > + }; > > > + > > > + /* Fixed crystal dedicated to mcp251x */ > > > + clk16m: clock-16m { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <16000000>; > > > + clock-output-names = "clk16m"; > > > + }; > > > + > > > + gpio-keys { > > > + compatible = "gpio-keys"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_gpio_keys>; > > > + > > > + wakeup { > > > + label = "Wake-Up"; > > > + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ > > > + linux,code = ; > > > + debounce-interval = <10>; > > > + wakeup-source; > > > + }; > > > + }; > > > + > > > + lcd_display: disp0 { > > > + compatible = "fsl,imx-parallel-display"; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + interface-pix-fmt = "bgr666"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_ipu1_lcdif>; > > > + status = "okay"; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + lcd_display_in: endpoint { > > > + remote-endpoint = <&ipu1_di0_disp0>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + lcd_display_out: endpoint { > > > + remote-endpoint = <&lcd_panel_in>; > > > + }; > > > + }; > > > + }; > > > + > > > + panel: panel { > > > + /* > > > + * edt,et057090dhu: EDT 5.7" LCD TFT > > > + * edt,et070080dh6: EDT 7.0" LCD TFT > > > + */ > > > + compatible = "edt,et057090dhu"; > > > + backlight = <&backlight>; > > > + > > > + port { > > > + lcd_panel_in: endpoint { > > > + remote-endpoint = <&lcd_display_out>; > > > + }; > > > + }; > > > + }; > > > +}; > > > + > > > +&backlight { > > > + brightness-levels = <0 127 191 223 239 247 251 255>; > > > + default-brightness-level = <1>; > > > + status = "okay"; > > > +}; > > > + > > > +/* Colibri SSP */ > > > +&ecspi4 { > > > + status = "okay"; > > > + > > > + mcp251x0: mcp251x@0 { > > > + compatible = "microchip,mcp2515"; > > > + reg = <0>; > > > + clocks = <&clk16m>; > > > + interrupt-parent = <&gpio3>; > > > + interrupts = <27 0x2>; > > > + spi-max-frequency = <10000000>; > > > + status = "okay"; > > > + }; > > > +}; > > > + > > > +&hdmi { > > > + status = "okay"; > > > +}; > > > + > > > +/* > > > + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) > > > + */ > > > +&i2c3 { > > > + status = "okay"; > > > + > > > + /* M41T0M6 real time clock on carrier board */ > > > + rtc_i2c: rtc@68 { > > > + compatible = "st,m41t0"; > > > + reg = <0x68>; > > > + }; > > > +}; > > > + > > > +&ipu1_di0_disp0 { > > > + remote-endpoint = <&lcd_display_in>; > > > +}; > > > + > > > +&pwm1 { > > > + status = "okay"; > > > +}; > > > + > > > +&pwm2 { > > > + status = "okay"; > > > +}; > > > + > > > +&pwm3 { > > > + status = "okay"; > > > +}; > > > + > > > +&pwm4 { > > > + status = "okay"; > > > +}; > > > + > > > +®_usb_host_vbus { > > > + status = "okay"; > > > +}; > > > + > > > +&uart1 { > > > + status = "okay"; > > > +}; > > > + > > > +&uart2 { > > > + status = "okay"; > > > +}; > > > + > > > +&uart3 { > > > + status = "okay"; > > > +}; > > > + > > > +&usbh1 { > > > + vbus-supply = <®_usb_host_vbus>; > > > + status = "okay"; > > > +}; > > > + > > > +&usbotg { > > > + status = "okay"; > > > +}; > > > + > > > +/* Colibri MMC */ > > > +&usdhc1 { > > > + status = "okay"; > > > +}; > > > + > > > +&weim { > > > + status = "okay"; > > > + > > > + /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */ > > > + ranges = <0 0 0x08000000 0x02000000 > > > + 1 0 0x0a000000 0x02000000 > > > + 2 0 0x0c000000 0x02000000 > > > + 3 0 0x0e000000 0x02000000>; > > > + > > > + /* SRAM on Colibri nEXT_CS0 */ > > > + sram@0,0 { > > > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > > > + reg = <0 0 0x00010000>; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + bank-width = <2>; > > > + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 > > > + 0x00000000 0x04000040 0x00000000>; > > > + }; > > > + > > > + /* SRAM on Colibri nEXT_CS1 */ > > > + sram@1,0 { > > > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > > > + reg = <1 0 0x00010000>; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + bank-width = <2>; > > > + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 > > > + 0x00000000 0x04000040 0x00000000>; > > > + }; > > > +}; > > > diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1.1.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1.1.dtsi > > > new file mode 100644 > > > index 000000000000..e40819f05c81 > > > --- /dev/null > > > +++ b/arch/arm/boot/dts/imx6qdl-colibri-v1.1.dtsi > > > @@ -0,0 +1,852 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ OR X11 > > > +/* > > > + * Copyright 2019 Toradex AG > > > + */ > > > +#include > > > + > > > +/ { > > > + model = "Toradex Colibri iMX6DL/S V1.1 Module"; > > > + compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; > > > + > > > + backlight: backlight { > > > + compatible = "pwm-backlight"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_gpio_bl_on>; > > > + pwms = <&pwm3 0 5000000>; > > > + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ > > > + status = "disabled"; > > > + }; > > > + > > > + reg_module_3v3: regulator-module-3v3 { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "+V3.3"; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + regulator-always-on; > > > + }; > > > + > > > + reg_module_3v3_audio: regulator-module-3v3-audio { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "+V3.3_AUDIO"; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + regulator-always-on; > > > + }; > > > + > > > + reg_usb_host_vbus: regulator-usb-host-vbus { > > > + compatible = "regulator-fixed"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; > > > + regulator-name = "usb_host_vbus"; > > > + regulator-min-microvolt = <5000000>; > > > + regulator-max-microvolt = <5000000>; > > > + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ > > > + status = "disabled"; > > > + }; > > > + > > > + sound { > > > + compatible = "fsl,imx-audio-sgtl5000"; > > > + model = "imx6dl-colibri-sgtl5000"; > > > + ssi-controller = <&ssi1>; > > > + audio-codec = <&codec>; > > > + audio-routing = > > > + "Headphone Jack", "HP_OUT", > > > + "LINE_IN", "Line In Jack", > > > + "MIC_IN", "Mic Jack", > > > + "Mic Jack", "Mic Bias"; > > > + mux-int-port = <1>; > > > + mux-ext-port = <5>; > > > + }; > > > + > > > + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ > > > + sound_spdif: sound-spdif { > > > + compatible = "fsl,imx-audio-spdif"; > > > + model = "imx-spdif"; > > > + spdif-controller = <&spdif>; > > > + spdif-in; > > > + spdif-out; > > > + status = "disabled"; > > > + }; > > > +}; > > > + > > > +&audmux { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; > > > + status = "okay"; > > > +}; > > > + > > > +/* Optional on SODIMM 55/63 */ > > > +&can1 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_flexcan1>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Optional on SODIMM 178/188 */ > > > +&can2 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_flexcan2>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri SSP */ > > > +&ecspi4 { > > > + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_ecspi4>; > > > + status = "disabled"; > > > +}; > > > + > > > +&fec { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_enet>; > > > + phy-mode = "rmii"; > > > + status = "okay"; > > > +}; > > > + > > > +&hdmi { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_hdmi_ddc>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* > > > + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and > > > + * touch screen controller > > > + */ > > > +&i2c2 { > > > + clock-frequency = <100000>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_i2c2>; > > > + status = "okay"; > > > + > > > + pmic: pfuze100@8 { > > > + compatible = "fsl,pfuze100"; > > > + reg = <0x08>; > > > + > > > + regulators { > > > + sw1a_reg: sw1ab { > > > + regulator-min-microvolt = <300000>; > > > + regulator-max-microvolt = <1875000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + regulator-ramp-delay = <6250>; > > > + }; > > > + > > > + sw1c_reg: sw1c { > > > + regulator-min-microvolt = <300000>; > > > + regulator-max-microvolt = <1875000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + regulator-ramp-delay = <6250>; > > > + }; > > > + > > > + sw3a_reg: sw3a { > > > + regulator-min-microvolt = <400000>; > > > + regulator-max-microvolt = <1975000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + > > > + swbst_reg: swbst { > > > + regulator-min-microvolt = <5000000>; > > > + regulator-max-microvolt = <5150000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + > > > + snvs_reg: vsnvs { > > > + regulator-min-microvolt = <1000000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + > > > + vref_reg: vrefddr { > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + > > > + /* vgen1: unused */ > > > + > > > + vgen2_reg: vgen2 { > > > + regulator-min-microvolt = <800000>; > > > + regulator-max-microvolt = <1550000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + > > > + /* > > > + * +V3.3_1.8_SD1 coming off VGEN3 and supplying > > > + * the i.MX 6 NVCC_SD1. > > > + */ > > > + vgen3_reg: vgen3 { > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <3300000>; > > > + regulator-boot-on; > > > + }; > > > + > > > + vgen4_reg: vgen4 { > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + > > > + vgen5_reg: vgen5 { > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <3300000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + > > > + vgen6_reg: vgen6 { > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <3300000>; > > > + regulator-boot-on; > > > + regulator-always-on; > > > + }; > > > + }; > > > + }; > > > + > > > + codec: sgtl5000@a { > > > + compatible = "fsl,sgtl5000"; > > > + reg = <0x0a>; > > > + clocks = <&clks IMX6QDL_CLK_CKO>; > > > + VDDA-supply = <®_module_3v3_audio>; > > > + VDDIO-supply = <®_module_3v3>; > > > + VDDD-supply = <&vgen4_reg>; > > > + lrclk-strength = <3>; > > > + }; > > > + > > > + /* STMPE811 touch screen controller */ > > > + stmpe811@41 { > > > + compatible = "st,stmpe811"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_touch_int>; > > > + reg = <0x41>; > > > + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > > > + interrupt-parent = <&gpio6>; > > > + interrupt-controller; > > > + id = <0>; > > > + blocks = <0x5>; > > > + irq-trigger = <0x1>; > > > + /* 3.25 MHz ADC clock speed */ > > > + st,adc-freq = <1>; > > > + /* 12-bit ADC */ > > > + st,mod-12b = <1>; > > > + /* internal ADC reference */ > > > + st,ref-sel = <0>; > > > + /* ADC conversion time: 80 clocks */ > > > + st,sample-time = <4>; > > > + > > > + stmpe_touchscreen { > > > + compatible = "st,stmpe-ts"; > > > + /* 8 sample average control */ > > > + st,ave-ctrl = <3>; > > > + /* 7 length fractional part in z */ > > > + st,fraction-z = <7>; > > > + /* > > > + * 50 mA typical 80 mA max touchscreen drivers > > > + * current limit value > > > + */ > > > + st,i-drive = <1>; > > > + /* 1 ms panel driver settling time */ > > > + st,settling = <3>; > > > + /* 5 ms touch detect interrupt delay */ > > > + st,touch-det-delay = <5>; > > > + }; > > > + > > > + stmpe_adc { > > > + compatible = "st,stmpe-adc"; > > > + /* forbid to use ADC channels 3-0 (touch) */ > > > + st,norequest-mask = <0x0F>; > > > + }; > > > + }; > > > +}; > > > + > > > +/* > > > + * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) > > > + */ > > > +&i2c3 { > > > + clock-frequency = <100000>; > > > + pinctrl-names = "default", "recovery"; > > > + pinctrl-0 = <&pinctrl_i2c3>; > > > + pinctrl-1 = <&pinctrl_i2c3_recovery>; > > > + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > > > + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri PWM */ > > > +&pwm1 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_pwm1>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri PWM */ > > > +&pwm2 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_pwm2>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri PWM */ > > > +&pwm3 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_pwm3>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri PWM */ > > > +&pwm4 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_pwm4>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Optional S/PDIF out on SODIMM 137 */ > > > +&spdif { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_spdif>; > > > + status = "disabled"; > > > +}; > > > + > > > +&ssi1 { > > > + status = "okay"; > > > +}; > > > + > > > +/* Colibri UART_A */ > > > +&uart1 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; > > > + fsl,dte-mode; > > > + uart-has-rtscts; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri UART_B */ > > > +&uart2 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_uart2_dte>; > > > + fsl,dte-mode; > > > + uart-has-rtscts; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri UART_C */ > > > +&uart3 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_uart3_dte>; > > > + fsl,dte-mode; > > > + status = "disabled"; > > > +}; > > > + > > > +&usbotg { > > > + pinctrl-names = "default"; > > > + disable-over-current; > > > + dr_mode = "peripheral"; > > > + status = "disabled"; > > > +}; > > > + > > > +/* Colibri MMC */ > > > +&usdhc1 { > > > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > > > + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; > > > + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; > > > + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; > > > + vmmc-supply = <®_module_3v3>; > > > + vqmmc-supply = <&vgen3_reg>; > > > + bus-width = <4>; > > > + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ > > > + disable-wp; > > > + enable-sdio-wakeup; > > > + keep-power-in-suspend; > > > + sd-uhs-sdr12; > > > + sd-uhs-sdr25; > > > + sd-uhs-sdr50; > > > + sd-uhs-sdr104; > > > + status = "disabled"; > > > +}; > > > + > > > +/* eMMC */ > > > +&usdhc3 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_usdhc3>; > > > + vqmmc-supply = <®_module_3v3>; > > > + bus-width = <8>; > > > + no-1-8-v; > > > + non-removable; > > > + status = "okay"; > > > +}; > > > + > > > +&weim { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_weim_sram &pinctrl_weim_cs0 > > > + &pinctrl_weim_cs1 &pinctrl_weim_cs2 > > > + &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; > > > + #address-cells = <2>; > > > + #size-cells = <1>; > > > + status = "disabled"; > > > +}; > > > + > > > +&iomuxc { > > > + pinctrl_audmux: audmuxgrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 > > > + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 > > > + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 > > > + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 > > > + /* SGTL5000 sys_mclk */ > > > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 > > > + >; > > > + }; > > > + > > > + pinctrl_cam_mclk: cammclkgrp { > > > + fsl,pins = < > > > + /* Parallel Camera CAM sys_mclk */ > > > + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 > > > + >; > > > + }; > > > + > > > + pinctrl_ecspi4: ecspi4grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 > > > + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 > > > + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 > > > + /* SPI CS */ > > > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 > > > + >; > > > + }; > > > + > > > + pinctrl_enet: enetgrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > > > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > > > + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 > > > + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 > > > + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 > > > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 > > > + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 > > > + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 > > > + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 > > > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) > > > + >; > > > + }; > > > + > > > + pinctrl_flexcan1: flexcan1grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 > > > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 > > > + >; > > > + }; > > > + > > > + pinctrl_flexcan2: flexcan2grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 > > > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 > > > + >; > > > + }; > > > + > > > + pinctrl_gpio_bl_on: gpioblon { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 > > > + >; > > > + }; > > > + > > > + pinctrl_gpio_keys: gpiokeys { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 > > > + >; > > > + }; > > > + > > > + pinctrl_hdmi_ddc: hdmiddcgrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 > > > + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 > > > + >; > > > + }; > > > + > > > + pinctrl_i2c2: i2c2grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 > > > + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 > > > + >; > > > + }; > > > + > > > + pinctrl_i2c3: i2c3grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > > > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > > > + >; > > > + }; > > > + > > > + pinctrl_i2c3_recovery: i2c3recoverygrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 > > > + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 > > > + >; > > > + }; > > > + > > > + pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0xb0b1 > > > + MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0xb0b1 > > > + MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0xb0b1 > > > + MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0xb0b1 > > > + MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0xb0b1 > > > + MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0xb0b1 > > > + MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0xb0b1 > > > + MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0xb0b1 > > > + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0xb0b1 > > > + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 > > > + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 > > > + /* Disable PWM pins on camera interface */ > > > + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 > > > + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 > > > + >; > > > + }; > > > + > > > + pinctrl_ipu1_lcdif: ipu1lcdifgrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xa1 > > > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xa1 > > > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0xa1 > > > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0xa1 > > > + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xa1 > > > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xa1 > > > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xa1 > > > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xa1 > > > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xa1 > > > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xa1 > > > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xa1 > > > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xa1 > > > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xa1 > > > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xa1 > > > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xa1 > > > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xa1 > > > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xa1 > > > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xa1 > > > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xa1 > > > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xa1 > > > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xa1 > > > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xa1 > > > + >; > > > + }; > > > + > > > + pinctrl_mic_gnd: gpiomicgnd { > > > + fsl,pins = < > > > + /* Controls Mic GND, PU or '1' pull Mic GND to GND */ > > > + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 > > > + >; > > > + }; > > > + > > > + pinctrl_mmc_cd: gpiommccd { > > > + fsl,pins = < > > > + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_pwm1: pwm1grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_pwm2: pwm2grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 > > > + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 > > > + >; > > > + }; > > > + > > > + pinctrl_pwm3: pwm3grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 > > > + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 > > > + >; > > > + }; > > > + > > > + pinctrl_pwm4: pwm4grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { > > > + fsl,pins = < > > > + /* USBH_EN */ > > > + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 > > > + >; > > > + }; > > > + > > > + pinctrl_spdif: spdifgrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 > > > + >; > > > + }; > > > + > > > + pinctrl_touch_int: gpiotouchintgrp { > > > + fsl,pins = < > > > + /* STMPE811 interrupt */ > > > + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 > > > + >; > > > + }; > > > + > > > + pinctrl_uart1_dce: uart1dcegrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > > > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > > > + >; > > > + }; > > > + > > > + /* DTE mode */ > > > + pinctrl_uart1_dte: uart1dtegrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 > > > + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 > > > + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 > > > + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 > > > + >; > > > + }; > > > + > > > + /* Additional DTR, DSR, DCD */ > > > + pinctrl_uart1_ctrl: uart1ctrlgrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 > > > + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 > > > + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 > > > + >; > > > + }; > > > + > > > + pinctrl_uart2_dte: uart2dtegrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 > > > + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 > > > + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 > > > + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_uart3_dte: uart3dtegrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1b0b1 > > > + MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1b0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_usbc_det: usbcdetgrp { > > > + fsl,pins = < > > > + /* USBC_DET */ > > > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 > > > + /* USBC_DET_EN */ > > > + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 > > > + /* USBC_DET_OVERWRITE */ > > > + MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 > > > + >; > > > + }; > > > + > > > + pinctrl_usdhc1: usdhc1grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 > > > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 > > > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 > > > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 > > > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 > > > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 > > > + >; > > > + }; > > > + > > > + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 > > > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 > > > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 > > > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 > > > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 > > > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 > > > + >; > > > + }; > > > + > > > + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 > > > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 > > > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 > > > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 > > > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 > > > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 > > > + >; > > > + }; > > > + > > > + pinctrl_usdhc3: usdhc3grp { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > > > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > > > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > > > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > > > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > > > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > > > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > > > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > > > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > > > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > > > + /* eMMC reset */ > > > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 > > > + >; > > > + }; > > > + > > > + pinctrl_weim_cs0: weimcs0grp { > > > + fsl,pins = < > > > + /* nEXT_CS0 */ > > > + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_weim_cs1: weimcs1grp { > > > + fsl,pins = < > > > + /* nEXT_CS1 */ > > > + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_weim_cs2: weimcs2grp { > > > + fsl,pins = < > > > + /* nEXT_CS2 */ > > > + MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_weim_sram: weimsramgrp { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 > > > + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 > > > + /* Data */ > > > + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 > > > + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 > > > + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 > > > + /* Address */ > > > + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 > > > + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 > > > + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 > > > + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 > > > + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 > > > + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 > > > + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 > > > + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 > > > + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 > > > + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 > > > + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 > > > + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 > > > + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 > > > + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 > > > + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 > > > + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 > > > + >; > > > + }; > > > + > > > + pinctrl_weim_rdnwr: weimrdnwr { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 > > > + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 > > > + >; > > > + }; > > > + > > > + pinctrl_weim_npwe: weimnpwe { > > > + fsl,pins = < > > > + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 > > > + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 > > > + >; > > > + }; > > > + > > > + /* ADDRESS[16:18] [25] used as GPIO */ > > > + pinctrl_weim_gpio_1: weimgpio-1 { > > > + fsl,pins = < > > > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > > > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 > > > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 > > > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > > > + >; > > > + }; > > > + > > > + /* ADDRESS[19:24] used as GPIO */ > > > + pinctrl_weim_gpio_2: weimgpio-2 { > > > + fsl,pins = < > > > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 > > > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 > > > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 > > > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > > > + >; > > > + }; > > > + > > > + /* DATA[16:31] used as GPIO */ > > > + pinctrl_weim_gpio_3: weimgpio-3 { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 > > > + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 > > > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 > > > + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 > > > + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 > > > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 > > > + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 > > > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 > > > + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 > > > + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 > > > + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 > > > + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 > > > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 > > > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 > > > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 > > > + >; > > > + }; > > > + > > > + /* DQM[0:3] used as GPIO */ > > > + pinctrl_weim_gpio_4: weimgpio-4 { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 > > > + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 > > > + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 > > > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 > > > + >; > > > + }; > > > + > > > + /* RDY used as GPIO */ > > > + pinctrl_weim_gpio_5: weimgpio-5 { > > > + fsl,pins = < > > > + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 > > > + >; > > > + }; > > > + > > > + /* ADDRESS[16] DATA[30] used as GPIO */ > > > + pinctrl_weim_gpio_6: weimgpio-6 { > > > + fsl,pins = < > > > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > > > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 > > > + >; > > > + }; > > > +}; > > > -- > > > 2.17.1 > > > > > > > > > > > > > -- > > Pengutronix e.K. | | > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > Thanks for looking into this! > > [1] https://patchwork.kernel.org/patch/10885309/ > [2] https://developer.toradex.com/device-tree-customization > > -- > Best regards - Freundliche Gr?sse - Meilleures salutations > > Senior Development Engineer, > Igor Opaniuk > > Toradex AG > Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 48 > 00 (main line) > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |