Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751671AbVLAJ3f (ORCPT ); Thu, 1 Dec 2005 04:29:35 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751677AbVLAJ3f (ORCPT ); Thu, 1 Dec 2005 04:29:35 -0500 Received: from embla.aitel.hist.no ([158.38.50.22]:17094 "HELO embla.aitel.hist.no") by vger.kernel.org with SMTP id S1751671AbVLAJ3e (ORCPT ); Thu, 1 Dec 2005 04:29:34 -0500 Message-ID: <438EC346.4000102@aitel.hist.no> Date: Thu, 01 Dec 2005 10:32:54 +0100 From: Helge Hafting User-Agent: Debian Thunderbird 1.0.7 (X11/20051017) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Jeff Garzik CC: linux-kernel@vger.kernel.org Subject: Re: Linux 2.6.15-rc3 References: <20051129213656.GA8706@aitel.hist.no> <438D69FF.2090002@aitel.hist.no> <438EB150.2090502@pobox.com> In-Reply-To: <438EB150.2090502@pobox.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7168 Lines: 155 Jeff Garzik wrote: > Helge Hafting wrote: > >> I tried compiling and booting rc1. The machine is remote, and did not >> come up. So I don't know why it didn't come up, but it is likely >> that it is the same problem. > > > Any chance at all to get netconsole or serial console output, after > turning on ATA_DEBUG and ATA_VERBOSE_DEBUG in include/linux/libata.h ? Tricky - no other machines around for serial. Maybe I can look into netconsole, and see if it'll work over an internet connection. The first try will be turning on that debug stuff and writing down what happens. The machine have the following block devices: * floppy drive * IDE dvd writer * 3 SCSI disks on a scsi controller * 2 SATA disks on the mainboard sata * USB card reader with 4 SCSI LUNs. Dmesg stuff from a normal 2.6.14 startup, in case it may be of help: VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 Probing IDE interface ide0... hda: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Losing some ticks... checking if CPU frequency changed. hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 sym0: <895> rev 0x1 at pci 0000:00:05.0 irq 16 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.1 Vendor: FUJITSU Model: MAS3184NP Rev: 0104 Type: Direct-Access ANSI SCSI revision: 03 target0:0:0: tagged command queuing enabled, command queue depth 4. target0:0:0: Beginning Domain Validation target0:0:0: asynchronous. target0:0:0: wide asynchronous. target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) target0:0:0: Ending Domain Validation target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) Vendor: IBM Model: DDYS-T09170N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 target0:0:1: tagged command queuing enabled, command queue depth 4. target0:0:1: Beginning Domain Validation target0:0:1: asynchronous. target0:0:1: wide asynchronous. target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) target0:0:1: Ending Domain Validation Vendor: IBM Model: IC35L018UWD210-0 Rev: S5BS Type: Direct-Access ANSI SCSI revision: 03 target0:0:6: tagged command queuing enabled, command queue depth 4. target0:0:6: Beginning Domain Validation target0:0:6: asynchronous. target0:0:6: wide asynchronous. target0:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) target0:0:6: Ending Domain Validation libata version 1.12 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 1 sata_via(0000:00:0f.0): routed to hard irq line 1 ata1: SATA max UDMA/133 cmd 0x9C00 ctl 0xA002 bmdma 0xAC00 irq 17 ata2: SATA max UDMA/133 cmd 0xA400 ctl 0xA802 bmdma 0xAC08 irq 17 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi1 : sata_via ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:407f ata2: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi2 : sata_via Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD2000JD-00H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 35890512 512-byte hdwr sectors (18376 MB) SCSI device sda: drive cache: write back SCSI device sda: 35890512 512-byte hdwr sectors (18376 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 < sdb5 sdb6 > Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 SCSI device sdc: 35843670 512-byte hdwr sectors (18352 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 35843670 512-byte hdwr sectors (18352 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sdc3 Attached scsi disk sdc at scsi0, channel 0, id 6, lun 0 SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 Attached scsi disk sdd at scsi1, channel 0, id 0, lun 0 SCSI device sde: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sde: drive cache: write back SCSI device sde: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sde: drive cache: write back sde: sde1 sde2 Attached scsi disk sde at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0 Attached scsi generic sg2 at scsi0, channel 0, id 6, lun 0, type 0 Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 0, type 0 Attached scsi generic sg4 at scsi2, channel 0, id 0, lun 0, type 0 [...] Initializing USB Mass Storage driver... scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. [...] Vendor: USB2.0 Model: HS-CF Rev: 1.64 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi removable disk sdf at scsi3, channel 0, id 0, lun 0 Attached scsi generic sg5 at scsi3, channel 0, id 0, lun 0, type 0 Vendor: USB2.0 Model: HS-MS Rev: 1.64 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi removable disk sdg at scsi3, channel 0, id 0, lun 1 Attached scsi generic sg6 at scsi3, channel 0, id 0, lun 1, type 0 Vendor: USB2.0 Model: HS-SM Rev: 1.64 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi removable disk sdh at scsi3, channel 0, id 0, lun 2 Attached scsi generic sg7 at scsi3, channel 0, id 0, lun 2, type 0 Vendor: USB2.0 Model: HS-SD/MMC Rev: 1.64 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi removable disk sdi at scsi3, channel 0, id 0, lun 3 Attached scsi generic sg8 at scsi3, channel 0, id 0, lun 3, type 0 usb-storage: device scan complete Helge Hafting - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/