Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Tue, 9 Jul 2019 08:48:53 -0600
From:   Rob Herring <robh@kernel.org>
To:     Piotr Sroka <piotrs@cadence.com>
Cc:     linux-kernel@vger.kernel.org,
        David Woodhouse <dwmw2@infradead.org>,
        BrianNorris <computersforpeace@gmail.com>,
        Boris Brezillon <bbrezillon@kernel.org>,
        Marek Vasut <marek.vasut@gmail.com>,
        Richard Weinberger <richard@nod.at>,
        Mark Rutland <mark.rutland@arm.com>,
        linux-mtd@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [v3 2/2] dt-bindings: nand: Add Cadence NAND controller driver
Message-ID: <20190709144853.GA23699@bogus>
References: <20190614150956.31244-1-piotrs@cadence.com>
 <20190614151301.5371-1-piotrs@cadence.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20190614151301.5371-1-piotrs@cadence.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Jun 14, 2019 at 04:13:01PM +0100, Piotr Sroka wrote:
> Signed-off-by: Piotr Sroka <piotrs@cadence.com>
> ---
> Changes for v3:
> - add unit suffix for board_delay 
> - move child description to proper place
> - remove prefix cadence_ for reg and sdma fields
> Changes for v2:
> - remove chip dependends parameters from dts bindings
> - add names for register ranges in dts bindings
> - add generic bindings to describe NAND chip representation
> ---
>  .../bindings/mtd/cadence-nand-controller.txt       | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
> new file mode 100644
> index 000000000000..e485b87075bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
> @@ -0,0 +1,51 @@
> +* Cadence NAND controller
> +
> +Required properties:
> +  - compatible : "cdns,hpnfc"

Only 1 version of h/w features and bugs?

'hp-nfc' would be a bit more readable IMO.

> +  - reg : Contains two entries, each of which is a tuple consisting of a
> +	  physical address and length. The first entry is the address and
> +	  length of the controller register set. The second entry is the
> +	  address and length of the Slave DMA data port.
> +  - reg-names: should contain "reg" and "sdma"
> +  - interrupts : The interrupt number.
> +  - clocks: phandle of the controller core clock (nf_clk).
> +
> +Optional properties:
> +  - dmas: shall reference DMA channel associated to the NAND controller
> +  - cdns,board-delay_ps : Estimated Board delay. The value includes the total

s/_/-/

> +    round trip delay for the signals and is used for deciding on values
> +    associated with data read capture. The example formula for SDR mode is
> +    the following:
> +    board_delay = RE#PAD_delay + PCB trace to device + PCB trace from device
> +    + DQ PAD delay
> +
> +Children nodes represent the available NAND chips.

Child nodes...

> +
> +Required properties of NAND chips:
> +  - reg: shall contain the native Chip Select ids from 0 to max supported by
> +    the cadence nand flash controller
> +
> +
> +See Documentation/devicetree/bindings/mtd/nand.txt for more details on
> +generic bindings.
> +
> +Example:
> +
> +nand_controller: nand-controller @60000000 {

remove space                       ^

> +
> +	  compatible = "cdns,hpnfc";
> +	  reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
> +	  reg-names = "reg", "sdma";
> +	  clocks = <&nf_clk>;
> +	  cdns,board-delay_ps = <4830>;
> +	  interrupts = <2 0>;
> +	  nand@0 {
> +	      reg = <0>;
> +	      label = "nand-1";
> +	  };
> +	  nand@1 {
> +	      reg = <1>;
> +	      label = "nand-2";
> +	  };
> +
> +};
> -- 
> 2.15.0
>