Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964826AbVLBD0v (ORCPT ); Thu, 1 Dec 2005 22:26:51 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964835AbVLBD0q (ORCPT ); Thu, 1 Dec 2005 22:26:46 -0500 Received: from e31.co.us.ibm.com ([32.97.110.149]:44987 "EHLO e31.co.us.ibm.com") by vger.kernel.org with ESMTP id S964825AbVLBD0i (ORCPT ); Thu, 1 Dec 2005 22:26:38 -0500 Date: Thu, 1 Dec 2005 20:26:36 -0700 From: john stultz To: lkml Cc: Ingo Molnar , Darren Hart , Nishanth Aravamudan , Frank Sorenson , George Anzinger , Roman Zippel , Ulrich Windl , Thomas Gleixner , john stultz , john stultz Message-Id: <20051202032636.19357.53304.sendpatchset@cog.beaverton.ibm.com> In-Reply-To: <20051202032551.19357.51421.sendpatchset@cog.beaverton.ibm.com> References: <20051202032551.19357.51421.sendpatchset@cog.beaverton.ibm.com> Subject: [PATCH 6/13] Time: i386 Conversion - part 2: Move timer_tsc.c to tsc.c Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 21722 Lines: 806 All, The conversion of i386 to use the generic timeofday subsystem has been split into 6 parts. This patch, the second of six, is a cleanup patch for the i386 arch in preparation of moving the the generic timeofday infrastructure. It moves some code from timer_tsc.c to a new tsc.c file. It applies on top of my timeofday-arch-i386-part1 patch. This patch is part the timeofday-arch-i386 patchset, so without the following parts it is not expected to compile. thanks -john Signed-off-by: John Stultz arch/i386/kernel/Makefile | 2 arch/i386/kernel/timers/common.c | 84 --------- arch/i386/kernel/timers/timer_tsc.c | 212 ------------------------ arch/i386/kernel/tsc.c | 312 ++++++++++++++++++++++++++++++++++++ include/asm-i386/timex.h | 34 --- include/asm-i386/tsc.h | 44 +++++ 6 files changed, 358 insertions(+), 330 deletions(-) linux-2.6.15-rc3-mm1_timeofday-arch-i386-part2_B12.patch ========================== diff -ruN tod-mm1/arch/i386/kernel/Makefile tod-mm2/arch/i386/kernel/Makefile --- tod-mm1/arch/i386/kernel/Makefile 2005-12-01 18:24:31.000000000 -0800 +++ tod-mm2/arch/i386/kernel/Makefile 2005-12-01 18:24:47.000000000 -0800 @@ -7,7 +7,7 @@ obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \ - quirks.o i8237.o i8253.o + quirks.o i8237.o i8253.o tsc.o obj-y += cpu/ obj-y += timers/ diff -ruN tod-mm1/arch/i386/kernel/timers/common.c tod-mm2/arch/i386/kernel/timers/common.c --- tod-mm1/arch/i386/kernel/timers/common.c 2005-12-01 18:12:56.000000000 -0800 +++ tod-mm2/arch/i386/kernel/timers/common.c 2005-12-01 18:24:34.000000000 -0800 @@ -14,66 +14,6 @@ #include "mach_timer.h" -/* ------ Calibrate the TSC ------- - * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset(). - * Too much 64-bit arithmetic here to do this cleanly in C, and for - * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) - * output busy loop as low as possible. We avoid reading the CTC registers - * directly because of the awkward 8-bit access mechanism of the 82C54 - * device. - */ - -#define CALIBRATE_TIME (5 * 1000020/HZ) - -unsigned long calibrate_tsc(void) -{ - mach_prepare_counter(); - - { - unsigned long startlow, starthigh; - unsigned long endlow, endhigh; - unsigned long count; - - rdtsc(startlow,starthigh); - mach_countup(&count); - rdtsc(endlow,endhigh); - - - /* Error: ECTCNEVERSET */ - if (count <= 1) - goto bad_ctc; - - /* 64-bit subtract - gcc just messes up with long longs */ - __asm__("subl %2,%0\n\t" - "sbbl %3,%1" - :"=a" (endlow), "=d" (endhigh) - :"g" (startlow), "g" (starthigh), - "0" (endlow), "1" (endhigh)); - - /* Error: ECPUTOOFAST */ - if (endhigh) - goto bad_ctc; - - /* Error: ECPUTOOSLOW */ - if (endlow <= CALIBRATE_TIME) - goto bad_ctc; - - __asm__("divl %2" - :"=a" (endlow), "=d" (endhigh) - :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME)); - - return endlow; - } - - /* - * The CTC wasn't reliable: we got a hit on the very first read, - * or the CPU was so fast/slow that the quotient wouldn't fit in - * 32 bits.. - */ -bad_ctc: - return 0; -} - #ifdef CONFIG_HPET_TIMER /* ------ Calibrate the TSC using HPET ------- * Return 2^32 * (1 / (TSC clocks per usec)) for getting the CPU freq. @@ -146,27 +86,3 @@ rdtscl(retval); return retval; } - - -/* calculate cpu_khz */ -void init_cpu_khz(void) -{ - if (cpu_has_tsc) { - unsigned long tsc_quotient = calibrate_tsc(); - if (tsc_quotient) { - /* report CPU clock rate in Hz. - * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = - * clock/second. Our precision is about 100 ppm. - */ - { unsigned long eax=0, edx=1000; - __asm__("divl %2" - :"=a" (cpu_khz), "=d" (edx) - :"r" (tsc_quotient), - "0" (eax), "1" (edx)); - printk("Detected %u.%03u MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - } - } - } -} - diff -ruN tod-mm1/arch/i386/kernel/timers/timer_tsc.c tod-mm2/arch/i386/kernel/timers/timer_tsc.c --- tod-mm1/arch/i386/kernel/timers/timer_tsc.c 2005-12-01 18:12:56.000000000 -0800 +++ tod-mm2/arch/i386/kernel/timers/timer_tsc.c 2005-12-01 18:24:34.000000000 -0800 @@ -32,10 +32,6 @@ static struct timer_opts timer_tsc; #endif -static inline void cpufreq_delayed_get(void); - -int tsc_disable __devinitdata = 0; - static int use_tsc; /* Number of usecs that the last interrupt was delayed */ static int delay_at_last_interrupt; @@ -45,39 +41,6 @@ static unsigned long long monotonic_base; static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; -/* convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better percision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ -static unsigned long cyc2ns_scale; -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} - static int count2; /* counter for mark_offset_tsc() */ /* Cached *multiplier* to convert TSC counts to microseconds. @@ -135,29 +98,6 @@ return base + cycles_2_ns(this_offset - last_offset); } -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - unsigned long long this_offset; - - /* - * In the NUMA case we dont use the TSC as they are not - * synchronized across all CPUs. - */ -#ifndef CONFIG_NUMA - if (!use_tsc) -#endif - /* no locking but a rare wrong value is not a big deal */ - return jiffies_64 * (1000000000 / HZ); - - /* Read the Time Stamp Counter */ - rdtscll(this_offset); - - /* return the value in ns */ - return cycles_2_ns(this_offset); -} static void delay_tsc(unsigned long loops) { @@ -222,127 +162,6 @@ #endif -#ifdef CONFIG_CPU_FREQ -#include - -static unsigned int cpufreq_delayed_issched = 0; -static unsigned int cpufreq_init = 0; -static struct work_struct cpufreq_delayed_get_work; - -static void handle_cpufreq_delayed_get(void *v) -{ - unsigned int cpu; - for_each_online_cpu(cpu) { - cpufreq_get(cpu); - } - cpufreq_delayed_issched = 0; -} - -/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -static inline void cpufreq_delayed_get(void) -{ - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n"); - schedule_work(&cpufreq_delayed_get_work); - } -} - -/* If the CPU frequency is scaled, TSC-based delays will need a different - * loops_per_jiffy value to function properly. - */ - -static unsigned int ref_freq = 0; -static unsigned long loops_per_jiffy_ref = 0; - -#ifndef CONFIG_SMP -static unsigned long fast_gettimeoffset_ref = 0; -static unsigned int cpu_khz_ref = 0; -#endif - -static int -time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - - if (val != CPUFREQ_RESUMECHANGE) - write_seqlock_irq(&xtime_lock); - if (!ref_freq) { - ref_freq = freq->old; - loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; -#ifndef CONFIG_SMP - fast_gettimeoffset_ref = fast_gettimeoffset_quotient; - cpu_khz_ref = cpu_khz; -#endif - } - - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); -#ifndef CONFIG_SMP - if (cpu_khz) - cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); - if (use_tsc) { - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { - fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq); - set_cyc2ns_scale(cpu_khz); - } - } -#endif - } - - if (val != CPUFREQ_RESUMECHANGE) - write_sequnlock_irq(&xtime_lock); - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - - -static int __init cpufreq_tsc(void) -{ - int ret; - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); - ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - if (!ret) - cpufreq_init = 1; - return ret; -} -core_initcall(cpufreq_tsc); - -#else /* CONFIG_CPU_FREQ */ -static inline void cpufreq_delayed_get(void) { return; } -#endif - -int recalibrate_cpu_khz(void) -{ -#ifndef CONFIG_SMP - unsigned int cpu_khz_old = cpu_khz; - - if (cpu_has_tsc) { - init_cpu_khz(); - cpu_data[0].loops_per_jiffy = - cpufreq_scale(cpu_data[0].loops_per_jiffy, - cpu_khz_old, - cpu_khz); - return 0; - } else - return -ENODEV; -#else - return -ENODEV; -#endif -} -EXPORT_SYMBOL(recalibrate_cpu_khz); static void mark_offset_tsc(void) { @@ -548,37 +367,6 @@ return -ENODEV; } -static int tsc_resume(void) -{ - write_seqlock(&monotonic_lock); - /* Assume this is the last mark offset time */ - rdtsc(last_tsc_low, last_tsc_high); -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled() && hpet_use_timer) - hpet_last = hpet_readl(HPET_COUNTER); -#endif - write_sequnlock(&monotonic_lock); - return 0; -} - -#ifndef CONFIG_X86_TSC -/* disable flag for tsc. Takes effect by clearing the TSC cpu flag - * in cpu/common.c */ -static int __init tsc_setup(char *str) -{ - tsc_disable = 1; - return 1; -} -#else -static int __init tsc_setup(char *str) -{ - printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " - "cannot disable TSC.\n"); - return 1; -} -#endif -__setup("notsc", tsc_setup); - /************************************************************/ diff -ruN tod-mm1/arch/i386/kernel/tsc.c tod-mm2/arch/i386/kernel/tsc.c --- tod-mm1/arch/i386/kernel/tsc.c 1969-12-31 16:00:00.000000000 -0800 +++ tod-mm2/arch/i386/kernel/tsc.c 2005-12-01 18:24:34.000000000 -0800 @@ -0,0 +1,312 @@ +/* + * This code largely moved from arch/i386/kernel/timer/timer_tsc.c + * which was originally moved from arch/i386/kernel/time.c. + * See comments there for proper credits. + */ + +#include +#include +#include + +#include + +#include "mach_timer.h" + +int tsc_disable __initdata = 0; +#ifdef CONFIG_X86_TSC +static int __init tsc_setup(char *str) +{ + printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " + "cannot disable TSC.\n"); + return 1; +} +#else +/* + * disable flag for tsc. Takes effect by clearing the TSC cpu flag + * in cpu/common.c + */ +static int __init tsc_setup(char *str) +{ + tsc_disable = 1; + + return 1; +} +#endif + +__setup("notsc", tsc_setup); + + +int read_current_timer(unsigned long *timer_val) +{ + if (cur_timer->read_timer) { + *timer_val = cur_timer->read_timer(); + return 0; + } + return -1; +} + + +/* convert from cycles(64bits) => nanoseconds (64bits) + * basic equation: + * ns = cycles / (freq / ns_per_sec) + * ns = cycles * (ns_per_sec / freq) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) + * + * Then we use scaling math (suggested by george@mvista.com) to get: + * ns = cycles * (10^6 * SC / cpu_khz) / SC + * ns = cycles * cyc2ns_scale / SC + * + * And since SC is a constant power of two, we can convert the div + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better percision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * + * -johnstul@us.ibm.com "math is hard, lets go shopping!" + */ +static unsigned long cyc2ns_scale; + +#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ + +static inline void set_cyc2ns_scale(unsigned long cpu_khz) +{ + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; +} + +static inline unsigned long long cycles_2_ns(unsigned long long cyc) +{ + return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; +} + +/* + * Scheduler clock - returns current time in nanosec units. + */ +unsigned long long sched_clock(void) +{ + unsigned long long this_offset; + + /* + * in the NUMA case we dont use the TSC as they are not + * synchronized across all CPUs. + */ +#ifndef CONFIG_NUMA + if (!use_tsc) +#endif + /* no locking but a rare wrong value is not a big deal */ + return jiffies_64 * (1000000000 / HZ); + + /* read the Time Stamp Counter: */ + rdtscll(this_offset); + + /* return the value in ns */ + return cycles_2_ns(this_offset); +} + +/* ------ Calibrate the TSC ------- + * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset(). + * Too much 64-bit arithmetic here to do this cleanly in C, and for + * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) + * output busy loop as low as possible. We avoid reading the CTC registers + * directly because of the awkward 8-bit access mechanism of the 82C54 + * device. + */ + +#define CALIBRATE_TIME (5 * 1000020/HZ) + +unsigned long calibrate_tsc(void) +{ + mach_prepare_counter(); + + { + unsigned long startlow, starthigh; + unsigned long endlow, endhigh; + unsigned long count; + + rdtsc(startlow,starthigh); + mach_countup(&count); + rdtsc(endlow,endhigh); + + + /* Error: ECTCNEVERSET */ + if (count <= 1) + goto bad_ctc; + + /* 64-bit subtract - gcc just messes up with long longs */ + __asm__("subl %2,%0\n\t" + "sbbl %3,%1" + :"=a" (endlow), "=d" (endhigh) + :"g" (startlow), "g" (starthigh), + "0" (endlow), "1" (endhigh)); + + /* Error: ECPUTOOFAST */ + if (endhigh) + goto bad_ctc; + + /* Error: ECPUTOOSLOW */ + if (endlow <= CALIBRATE_TIME) + goto bad_ctc; + + __asm__("divl %2" + :"=a" (endlow), "=d" (endhigh) + :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME)); + + return endlow; + } + + /* + * The CTC wasn't reliable: we got a hit on the very first read, + * or the CPU was so fast/slow that the quotient wouldn't fit in + * 32 bits.. + */ +bad_ctc: + return 0; +} + +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + init_cpu_khz(); + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, + cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} +EXPORT_SYMBOL(recalibrate_cpu_khz); + + +/* calculate cpu_khz */ +void init_cpu_khz(void) +{ + if (cpu_has_tsc) { + unsigned long tsc_quotient = calibrate_tsc(); + if (tsc_quotient) { + /* report CPU clock rate in Hz. + * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = + * clock/second. Our precision is about 100 ppm. + */ + { unsigned long eax=0, edx=1000; + __asm__("divl %2" + :"=a" (cpu_khz), "=d" (edx) + :"r" (tsc_quotient), + "0" (eax), "1" (edx)); + printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); + } + } + } +} + +#ifdef CONFIG_CPU_FREQ + +static unsigned int cpufreq_delayed_issched = 0; +static unsigned int cpufreq_init = 0; +static struct work_struct cpufreq_delayed_get_work; + +static void handle_cpufreq_delayed_get(void *v) +{ + unsigned int cpu; + + for_each_online_cpu(cpu) + cpufreq_get(cpu); + + cpufreq_delayed_issched = 0; +} + +/* + * if we notice lost ticks, schedule a call to cpufreq_get() as it tries + * to verify the CPU frequency the timing core thinks the CPU is running + * at is still correct. + */ +void cpufreq_delayed_get(void) +{ + if (cpufreq_init && !cpufreq_delayed_issched) { + cpufreq_delayed_issched = 1; + printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n"); + schedule_work(&cpufreq_delayed_get_work); + } +} + +/* + * if the CPU frequency is scaled, TSC-based delays will need a different + * loops_per_jiffy value to function properly. + */ + +static unsigned int ref_freq = 0; +static unsigned long loops_per_jiffy_ref = 0; + +#ifndef CONFIG_SMP +static unsigned long fast_gettimeoffset_ref = 0; +static unsigned long cpu_khz_ref = 0; +#endif + +static int +time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + + if (val != CPUFREQ_RESUMECHANGE) + write_seqlock_irq(&xtime_lock); + + if (!ref_freq) { + ref_freq = freq->old; + loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; +#ifndef CONFIG_SMP + fast_gettimeoffset_ref = fast_gettimeoffset_quotient; + cpu_khz_ref = cpu_khz; +#endif + } + + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); +#ifndef CONFIG_SMP + if (cpu_khz) + cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); + if (use_tsc) { + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { + fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq); + set_cyc2ns_scale(cpu_khz); + } + } +#endif + } + + if (val != CPUFREQ_RESUMECHANGE) + write_sequnlock_irq(&xtime_lock); + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + int ret; + + INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); + ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (!ret) + cpufreq_init = 1; + return ret; +} + +core_initcall(cpufreq_tsc); + +#else /* CONFIG_CPU_FREQ */ +void cpufreq_delayed_get(void) { return; } +#endif diff -ruN tod-mm1/include/asm-i386/timex.h tod-mm2/include/asm-i386/timex.h --- tod-mm1/include/asm-i386/timex.h 2005-12-01 18:13:31.000000000 -0800 +++ tod-mm2/include/asm-i386/timex.h 2005-12-01 18:24:34.000000000 -0800 @@ -8,6 +8,7 @@ #include #include +#include #ifdef CONFIG_X86_ELAN # define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */ @@ -16,39 +17,6 @@ #endif -/* - * Standard way to access the cycle counter on i586+ CPUs. - * Currently only used on SMP. - * - * If you really have a SMP machine with i486 chips or older, - * compile for that, and this will just always return zero. - * That's ok, it just means that the nicer scheduling heuristics - * won't work for you. - * - * We only use the low 32 bits, and we'd simply better make sure - * that we reschedule before that wraps. Scheduling at least every - * four billion cycles just basically sounds like a good idea, - * regardless of how fast the machine is. - */ -typedef unsigned long long cycles_t; - -static inline cycles_t get_cycles (void) -{ - unsigned long long ret=0; - -#ifndef CONFIG_X86_TSC - if (!cpu_has_tsc) - return 0; -#endif - -#if defined(CONFIG_X86_GENERIC) || defined(CONFIG_X86_TSC) - rdtscll(ret); -#endif - return ret; -} - -extern unsigned int cpu_khz; - extern int read_current_timer(unsigned long *timer_value); #define ARCH_HAS_READ_CURRENT_TIMER 1 diff -ruN tod-mm1/include/asm-i386/tsc.h tod-mm2/include/asm-i386/tsc.h --- tod-mm1/include/asm-i386/tsc.h 1969-12-31 16:00:00.000000000 -0800 +++ tod-mm2/include/asm-i386/tsc.h 2005-12-01 18:24:34.000000000 -0800 @@ -0,0 +1,44 @@ +/* + * linux/include/asm-i386/tsc.h + * + * i386 TSC related functions + */ +#ifndef _ASM_i386_TSC_H +#define _ASM_i386_TSC_H + +#include +#include + +/* + * Standard way to access the cycle counter on i586+ CPUs. + * Currently only used on SMP. + * + * If you really have a SMP machine with i486 chips or older, + * compile for that, and this will just always return zero. + * That's ok, it just means that the nicer scheduling heuristics + * won't work for you. + * + * We only use the low 32 bits, and we'd simply better make sure + * that we reschedule before that wraps. Scheduling at least every + * four billion cycles just basically sounds like a good idea, + * regardless of how fast the machine is. + */ +typedef unsigned long long cycles_t; + +static inline cycles_t get_cycles (void) +{ + unsigned long long ret=0; + +#ifndef CONFIG_X86_TSC + if (!cpu_has_tsc) + return 0; +#endif + +#if defined(CONFIG_X86_GENERIC) || defined(CONFIG_X86_TSC) + rdtscll(ret); +#endif + return ret; +} + +extern unsigned int cpu_khz; +#endif - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/