Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Thu, 11 Jul 2019 23:48:58 -0700
From:   Dmitry Torokhov <dmitry.torokhov@gmail.com>
To:     Crag Wang <crag0715@gmail.com>
Cc:     yjjung@melfas.com, jsj1012@melfas.com, leesh832@lgdisplay.com,
        Mario Limonciello <mario_limonciello@dell.com>,
        chrome.os.engineering@dell.com, "Crag.Wang" <crag.wang@dell.com>,
        Sangwon Jee <jeesw@melfas.com>, linux-input@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH] input: touchscreen: add delay time to device power on
Message-ID: <20190712064858.GD150689@dtor-ws>
References: <20190710025859.6025-1-crag0715@gmail.com>
 <CAP-8N0hTEXkK3iqGP=+gtuVVcqo-+KYHC_N6+8Q90ndf_UVJpA@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAP-8N0hTEXkK3iqGP=+gtuVVcqo-+KYHC_N6+8Q90ndf_UVJpA@mail.gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Crag,

On Wed, Jul 10, 2019 at 04:58:40PM +0800, Crag Wang wrote:
> Adding more
> 
> On Wed, Jul 10, 2019 at 10:59 AM <crag0715@gmail.com> wrote:
> >
> > From: "Crag.Wang" <crag.wang@dell.com>
> >
> > Delay time for MELFAS MIP4 controller is required at power on stage
> > regardless the existence of GPIO consumer lookup from devicetree or
> > ACPI device table.
> >
> > There is an issue if GPIO ce is undefined in the ACPI results no delay
> > time for deive power on, the controller ended up in an abnormal state.
> >

If kernel does not reset the controller it should not have to wait for
reset to complete either. Since your firmware resets the controller it
also has to conform to the timing requirements.

Thanks.

-- 
Dmitry