Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751131AbVLCBRR (ORCPT ); Fri, 2 Dec 2005 20:17:17 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751127AbVLCBRQ (ORCPT ); Fri, 2 Dec 2005 20:17:16 -0500 Received: from pffamerica.com ([69.222.0.23]:51726 "EHLO usfltd.com") by vger.kernel.org with ESMTP id S1751131AbVLCBRQ (ORCPT ); Fri, 2 Dec 2005 20:17:16 -0500 Date: Fri, 2 Dec 2005 19:18:01 -0600 Message-Id: <200512021918.AA134021646@usfltd.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: "art" Reply-To: To: CC: Subject: RE: SMART over USB - problem X-Mailer: Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8458 Lines: 194 SMART over USB - problem usb-------------------------------------------------------- # smartctl -a -T verypermissive /dev/sde smartctl version 5.33 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: WDC WD25 00JB-00GVA0 Version: 08.0 scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 >> Terminate command early due to bad response to IEC mode page Error Counter logging not supported Error Events logging not supported scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Device does not support Self Test logging # smartctl -a -T verypermissive /dev/sdd smartctl version 5.33 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: WDC WD30 00JB-00KFA0 Version: 08.0 scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 >> Terminate command early due to bad response to IEC mode page Error Counter logging not supported Error Events logging not supported scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Device does not support Self Test logging ide---------------------------------------------------------- # smartctl -a -T verypermissive /dev/hda smartctl version 5.33 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1200BB-22CAA0 Serial Number: WD-WMA8Cxxxxxxx Firmware Version: 16.06V16 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Dec 1 14:17:57 2005 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (4680) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 87) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 099 091 021 Pre-fail Always - 5841 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 708 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10517 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 686 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging # ----------------------------------------------------------------------- ide---works usb---not (USB-external-case) or (eide-usb-scsi conversion) ??? xboom -------------------------------------------------------------------------------------- On Fri, Dec 02, 2005 at 05:28:42PM -0600, art wrote: > > SMART over USB - problem Do you expect it to work? USB storage is really scsi, so I doubt this will ever work like you are expecting it to. sorry, greg k-h SCSI----------------------------------------------------------------------------------- # smartctl -a /dev/sdb smartctl version 5.33 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: COMPAQ BF14688286 Version: HPB3 Serial number: 3KN04A1X0000xxxxxxxx Device type: disk Transport protocol: Parallel SCSI (SPI-4) Local Time is: Fri Dec 2 19:00:19 2005 CST Device supports SMART and is Enabled Temperature Warning Enabled SMART Health Status: OK Current Drive Temperature: 38 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1682981317 Blocks received from initiator = 330361456 Blocks read from cache and sent to initiator = 84738089 Number of read and write commands whose size <= segment size = 374742809 Number of read and write commands whose size > segment size = 120394 Error counter log: Errors Corrected by Total Correction Gigabytes Total EEC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 0 0 0 0 0.000 0 write: 0 0 0 0 0 0.000 0 Non-medium error count: 0 Error Events logging not supported SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background long Interrupted ('-X' switch) - 354 - [- - -] # 2 Background long Interrupted ('-X' switch) - 354 - [- - -] # 3 Background long Interrupted ('-X' switch) - 354 - [- - -] # 4 Background long Interrupted ('-X' switch) - 313 - [- - -] # 5 Background long Interrupted ('-X' switch) - 313 - [- - -] # 6 Background long Interrupted ('-X' switch) - 313 - [- - -] # 7 Background short Completed - 0 - [- - -] Long (extended) Self Test duration: 2102 seconds [35.0 minutes] # greg works on SCSI/IDE why not on IDE over USB/IEEE1394/iSCSI/SAN... ??? is the problem in my external usb box or in linux usb/scsi stack ??? xboom - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/