Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Lukasz Luba <l.luba@partner.samsung.com>
To:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org
Cc:     mturquette@baylibre.com, sboyd@kernel.org,
        b.zolnierkie@samsung.com, krzk@kernel.org, kgene@kernel.org,
        mark.rutland@arm.com, robh+dt@kernel.org, cw00.choi@samsung.com,
        kyungmin.park@samsung.com, a.hajda@samsung.com,
        m.szyprowski@samsung.com, s.nawrocki@samsung.com,
        myungjoo.ham@samsung.com, Lukasz Luba <l.luba@partner.samsung.com>
Subject: [PATCH v1 13/50] clk: samsung: add DPLL rate table in Exynos5420
Date:   Mon, 15 Jul 2019 14:43:40 +0200
Message-Id: <20190715124417.4787-14-l.luba@partner.samsung.com>
In-Reply-To: <20190715124417.4787-1-l.luba@partner.samsung.com>
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20190715124417.4787-1-l.luba@partner.samsung.com>
        <CGME20190715124444eucas1p2683c9896e8be45d6a0cd4afeb681a2ea@eucas1p2.samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The DPLL has fixed frequency left by the bootloader and it is not possible
to change it. With this patch the DPLL gets rate table the same for the
whole  PLL family (similar as APLL, KPLL according to RM) so the frequency
might be changed to one of the values defined there.
It is needed for further patches which change the DPLL frequency to feed
the clocks with proper base.
It also sets CLK_IS_CRITICAL for SCLK_DPLL due to some drivers which could
disable master clock, which is then populated higher and tries to disable
PLL, which casues system crash. The flag is needed for this kind of use
cases.

Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 7f8221527633..2395b02ce8c5 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -694,7 +694,8 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
 	MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
 	MUX_F(CLK_MOUT_EPLL, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1,
 			CLK_SET_RATE_PARENT, 0),
-	MUX(0, "mout_sclk_dpll", mout_dpll_p, SRC_TOP6, 24, 1),
+	MUX_F(CLK_MOUT_SCLK_DPLL, "mout_sclk_dpll", mout_dpll_p,
+			SRC_TOP6, 24, 1, CLK_IS_CRITICAL, 0),
 	MUX(0, "mout_sclk_cpll", mout_cpll_p, SRC_TOP6, 28, 1),
 
 	MUX(CLK_MOUT_SW_ACLK400_ISP, "mout_sw_aclk400_isp",
@@ -1514,6 +1515,7 @@ static void __init exynos5x_clk_init(struct device_node *np,
 
 	if (_get_rate("fin_pll") == 24 * MHZ) {
 		exynos5x_plls[apll].rate_table = exynos5420_pll2550x_24mhz_tbl;
+		exynos5x_plls[dpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
 		exynos5x_plls[epll].rate_table = exynos5420_epll_24mhz_tbl;
 		exynos5x_plls[kpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
 	}
-- 
2.17.1