Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932193AbVLDDAt (ORCPT ); Sat, 3 Dec 2005 22:00:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932196AbVLDDAt (ORCPT ); Sat, 3 Dec 2005 22:00:49 -0500 Received: from wproxy.gmail.com ([64.233.184.204]:18639 "EHLO wproxy.gmail.com") by vger.kernel.org with ESMTP id S932193AbVLDDAs convert rfc822-to-8bit (ORCPT ); Sat, 3 Dec 2005 22:00:48 -0500 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=kSKemdX5yfFtvAzkmxKnICNQ/XS/B+0tWMYyDS1Q2YILagPRz0ig8y2JXFr/msF7p6ISWVVLE93xn39mK5eQbdam57YSonsI1OaYV1D3ndn3+urrHRHCavN40wfoMrBXYykhcEv4pCbS8Bk5pMZC+AOONAo/7hLREIYR5tSURtg= Message-ID: <9dda34920512031900o1055afffre8dbf7ae00232687@mail.gmail.com> Date: Sat, 3 Dec 2005 22:00:47 -0500 From: Paul Blazejowski To: LKML Subject: Re: Linux 2.6.15-rc4 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24612 Lines: 553 My clock is running on X2 cpu using x86_64 kernel, there's also some invalid IRQ. Check vendor BIOS spews, details in dmesg below: Bootdata ok (command line is root=/dev/sda1 ro elevator=cfq vga=795) Linux version 2.6.15-rc4 (root@blaze) (gcc version 3.4.4) #1 SMP PREEMPT Sat Dec 3 04:45:27 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7d30 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff30c0 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x000000001fff9900 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff9a00 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff9840 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 0-20000000 Using 31 for the hash shift. Bootmem setup node 0 0000000000000000-000000001fff0000 On node 0 totalpages: 127929 DMA zone: 2704 pages, LIFO batch:2 DMA32 zone: 125225 pages, LIFO batch:64 Normal zone: 0 pages, LIFO batch:2 HighMem zone: 0 pages, LIFO batch:2 Nvidia board detected. Ignoring ACPI timer override. ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Checking aperture... CPU 0: aperture @ c50000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/sda1 ro elevator=cfq vga=795 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2400.207 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 510208k/524224k available (2818k kernel code, 13628k reserved, 1255k data, 248k init) Calibrating delay using timer specific routine.. 4803.43 BogoMIPS (lpj=2401715) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Node 0 -> Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 15.001 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4799.69 BogoMIPS (lpj=2399847) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Node 0 -> Core 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 568 cycles) Brought up 2 CPUs time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: d0000000-d1ffffff PREFETCH window: 30000000-300fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: c8000000-cfffffff PREFETCH window: c0000000-c7ffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 GSI 16 sharing vector 0xD9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 217, io mem 0xd2004000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v2.3 sl811: driver sl811-hcd, 19 May 2005 usb 1-2: new full speed USB device using ohci_hcd and address 2 hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-3: new full speed USB device using ohci_hcd and address 3 hub 1-3:1.0: USB hub found hub 1-3:1.0: 3 ports detected usb 1-4: new low speed USB device using ohci_hcd and address 4 input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input0 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-4 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 10240k, total 131072k vesafb: mode is 1280x1024x32, linelength=5120, pages=0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 vesafb: Mode is not VGA compatible Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xffff8100000a0000 fb1: VGA16 VGA frame buffer device Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using monotonic_clock(). PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... usb 1-3.1: new low speed USB device using ohci_hcd and address 5 input: Microsoft Natural Keyboard Pro as /class/input/input1 input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-3.1 input: Microsoft Natural Keyboard Pro as /class/input/input2 input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-3.1 hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. sata_nv 0000:00:07.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 GSI 17 sharing vector 0xE1 and IRQ 17 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 225 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 225 ata1: no device found (phy stat 00000000) scsi0 : sata_nv ata2: no device found (phy stat 00000000) scsi1 : sata_nv ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 233 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 233 ata3: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:407f ata3: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata3: dev 0 configured for UDMA/133 scsi2 : sata_nv ata4: no device found (phy stat 00000000) scsi3 : sata_nv Vendor: ATA Model: WDC WD2000JD-00H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sda: drive cache: write back SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sg0 type 0 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered ip_conntrack version 2.4 (2047 buckets, 16376 max) - 288 bytes per conntrack TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 Freeing unused kernel memory: 248k freed i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 GSI 19 sharing vector 0x32 and IRQ 19 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 2-2: new high speed USB device using ehci_hcd and address 2 hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected PCI: Enabling device 0000:00:04.0 (0000 -> 0003) ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 50710 usecs intel8x0: clocking to 46809 usb 1-2: USB disconnect, address 2 usb 1-3: USB disconnect, address 3 usb 1-3.1: USB disconnect, address 5 usb 1-3: new full speed USB device using ohci_hcd and address 6 hub 1-3:1.0: USB hub found hub 1-3:1.0: 3 ports detected usb 1-4: USB disconnect, address 4 usb 1-4: new low speed USB device using ohci_hcd and address 7 input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-4 usb 1-3.1: new low speed USB device using ohci_hcd and address 8 input: Microsoft Natural Keyboard Pro as /class/input/input4 input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-3.1 input: Microsoft Natural Keyboard Pro as /class/input/input5 input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-3.1 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.47. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:0a.0 to 64 eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 eth0: no link during initialization. ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 20 sharing vector 0x3A and IRQ 20 ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 58 Installing spdif_bug patch: Audigy 2 Platinum [SB0240P] eth0: link up. gameport: EMU10K1 is pci0000:05:07.1/gameport0, io 0xa400, speed 1205kHz ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 GSI 21 sharing vector 0x42 and IRQ 21 ACPI: PCI Interrupt 0000:05:07.2[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[d100e000-d100e7ff] Max Packet=[2048] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 22 sharing vector 0x4A and IRQ 22 ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 74 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[74] MMIO=[d100c000-d100c7ff] Max Packet=[2048] ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 58 ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 58 eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091065c55] ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800004f6359] nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-8168 Thu Oct 20 10:49:01 PDT 2005 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-8168 Thu Oct 20 10:49:01 PDT 2005 X does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} X does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} X does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} glxinfo does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} glxinfo does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} glxinfo does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} glxgears does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} glxgears does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} glxgears does an incomplete pfn remapping Call Trace:{remap_pfn_range+152} {pci_bus_read_config_dword+124} {:nvidia:nv_kern_mmap+1410} {do_mmap_pgoff+1389} {sys_mmap+150} {system_call+126} Losing some ticks... checking if CPU frequency changed. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! warning: many lost ticks. Your time source seems to be instable or some driver is hogging interupts rip default_idle+0x36/0x80 Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Running ntpdate gives time offsets: root@blaze:~# uptime 21:59:45 up 2:08, 4 users, load average: 1.70, 1.41, 0.71 root@blaze:~# ntpdate time Looking for host time and service ntp host found : time 3 Dec 21:59:41 ntpdate[19591]: step time server 192.168.0.1 offset -11.837451 sec Kernel config and any other details are available upon request. Thanks, Paul B. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/