Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Jean-Jacques Hiblot <jjhiblot@ti.com>
To:     <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <robh+dt@kernel.org>,
        <mark.rutland@arm.com>, <daniel.thompson@linaro.org>
CC:     <dmurphy@ti.com>, <linux-leds@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        Jean-Jacques Hiblot <jjhiblot@ti.com>
Subject: [PATCH v2 1/2] dt-bindings: leds: document the "power-supply" property
Date:   Mon, 15 Jul 2019 17:56:56 +0200
Message-ID: <20190715155657.22976-2-jjhiblot@ti.com>
In-Reply-To: <20190715155657.22976-1-jjhiblot@ti.com>
References: <20190715155657.22976-1-jjhiblot@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Most of the LEDs are powered by a voltage/current regulator. Describing it
in the device-tree makes it possible for the LED core to enable/disable it
when needed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---
 Documentation/devicetree/bindings/leds/common.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 70876ac11367..539e124b1457 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -61,6 +61,11 @@ Optional properties for child nodes:
 - panic-indicator : This property specifies that the LED should be used,
 		    if at all possible, as a panic indicator.
 
+- power-supply : A voltage/current regulator used to to power the LED. When a
+		 LED is turned off, the LED core disable its regulator. The
+		 same regulator can power many LED (or other) devices. It is
+		 turned off only when all of its users disabled it.
+
 - trigger-sources : List of devices which should be used as a source triggering
 		    this LED activity. Some LEDs can be related to a specific
 		    device and should somehow indicate its state. E.g. USB 2.0
@@ -106,6 +111,7 @@ gpio-leds {
 		label = "Status";
 		linux,default-trigger = "heartbeat";
 		gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&led_regulator>;
 	};
 
 	usb {
-- 
2.17.1