Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 17 Jul 2019 10:21:56 +0200
From:   Boris Brezillon <boris.brezillon@collabora.com>
To:     Naga Sureshkumar Relli <nagasure@xilinx.com>
Cc:     "miquel.raynal@bootlin.com" <miquel.raynal@bootlin.com>,
        "bbrezillon@kernel.org" <bbrezillon@kernel.org>,
        "richard@nod.at" <richard@nod.at>,
        "dwmw2@infradead.org" <dwmw2@infradead.org>,
        "computersforpeace@gmail.com" <computersforpeace@gmail.com>,
        "marek.vasut@gmail.com" <marek.vasut@gmail.com>,
        "vigneshr@ti.com" <vigneshr@ti.com>,
        "yamada.masahiro@socionext.com" <yamada.masahiro@socionext.com>,
        "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Michal Simek <michals@xilinx.com>,
        Srikanth Vemula <svemula@xilinx.com>,
        "nagasuresh12@gmail.com" <nagasuresh12@gmail.com>
Subject: Re: [LINUX PATCH v18 1/2] mtd: rawnand: nand_micron: Do not over
 write driver's read_page()/write_page()
Message-ID: <20190717102156.68aa86f7@pc-375.home>
In-Reply-To: <20190717095525.6e2e9730@pc-375.home>
References: <20190716053051.11282-1-naga.sureshkumar.relli@xilinx.com>
        <20190716093137.3d8e8c1f@pc-375.home>
        <20190716094450.122ba6e7@pc-375.home>
        <DM6PR02MB4779307E32670683AE9F60D6AFC90@DM6PR02MB4779.namprd02.prod.outlook.com>
        <20190717095525.6e2e9730@pc-375.home>
Organization: Collabora
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, 17 Jul 2019 09:55:25 +0200
Boris Brezillon <boris.brezillon@collabora.com> wrote:

> On Wed, 17 Jul 2019 05:33:35 +0000
> Naga Sureshkumar Relli <nagasure@xilinx.com> wrote:
> 
> > Hi Boris,
> >   
> > > -----Original Message-----
> > > From: Boris Brezillon <boris.brezillon@collabora.com>
> > > Sent: Tuesday, July 16, 2019 1:15 PM
> > > To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> > > Cc: miquel.raynal@bootlin.com; bbrezillon@kernel.org; richard@nod.at;
> > > dwmw2@infradead.org; computersforpeace@gmail.com; marek.vasut@gmail.com;
> > > vigneshr@ti.com; yamada.masahiro@socionext.com; linux-mtd@lists.infradead.org; linux-
> > > kernel@vger.kernel.org; Michal Simek <michals@xilinx.com>; Srikanth Vemula
> > > <svemula@xilinx.com>; nagasuresh12@gmail.com
> > > Subject: Re: [LINUX PATCH v18 1/2] mtd: rawnand: nand_micron: Do not over write
> > > driver's read_page()/write_page()
> > > 
> > > On Tue, 16 Jul 2019 09:31:37 +0200
> > > Boris Brezillon <boris.brezillon@collabora.com> wrote:
> > >     
> > > > On Mon, 15 Jul 2019 23:30:51 -0600
> > > > Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> wrote:
> > > >    
> > > > > Add check before assigning chip->ecc.read_page() and
> > > > > chip->ecc.write_page()
> > > > >
> > > > > Signed-off-by: Naga Sureshkumar Relli
> > > > > <naga.sureshkumar.relli@xilinx.com>
> > > > > ---
> > > > > Changes in v18
> > > > >  - None
> > > > > ---
> > > > >  drivers/mtd/nand/raw/nand_micron.c | 7 +++++--
> > > > >  1 file changed, 5 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c
> > > > > b/drivers/mtd/nand/raw/nand_micron.c
> > > > > index cbd4f09ac178..565f2696c747 100644
> > > > > --- a/drivers/mtd/nand/raw/nand_micron.c
> > > > > +++ b/drivers/mtd/nand/raw/nand_micron.c
> > > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip)
> > > > >  		chip->ecc.size = 512;
> > > > >  		chip->ecc.strength = chip->base.eccreq.strength;
> > > > >  		chip->ecc.algo = NAND_ECC_BCH;
> > > > > -		chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
> > > > > -		chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
> > > > > +		if (!chip->ecc.read_page)
> > > > > +			chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
> > > > > +
> > > > > +		if (!chip->ecc.write_page)
> > > > > +			chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
> > > > >    
> > > >
> > > > Seriously?! I told you this was inappropriate and you keep sending
> > > > this patch. So let's make it clear:
> > > >
> > > > Nacked-by: Boris Brezillon <boris.brezillon@collabora.com>
> > > >
> > > > Fix your controller driver instead of adding hacks to the Micron logic!    
> > > 
> > > Not even going to review the other patch: if you have to do that, that means the driver is
> > > broken. On a side note, this patch series is still not threaded as it should be and it's a v18 for a
> > > damn NAND controller driver! Sorry but you reached the limit of my patience. Please find
> > > someone to help you with that task.    
> > My intention is not to resend this 1/2 again. Sorry for that.
> > We already had some discussion on [v17 1/2], https://lkml.org/lkml/2019/6/26/430
> > And there we didn't conclude that raw_read()/writes().  
> 
> Yes, looks like I never replied to that one, but I think my previous
> explanation were clear enough to not argue on that aspect any longer/
> 
> > So I thought that, will send updated driver along with this patch, then will get more information about
> > The issue on the latest driver review.  
> 
> More on that topic. I don't think you ever tested on-die ECC on a
> Micron NAND, otherwise you would have noticed that your solution
> completely bypasses the on-die ECC logic (and this will clearly break
> existing on-die ECC users). See, that's what I'm complaining about,
> Looks like you don't really understand what you're doing.
> 
> > There is nothing like keep on sending this patch, As you people are experts in the driver review, 
> > if this patch is a hack, then we will definitely fix that in controller driver. I will find a way to do that.
> > 
> > But in this flow of patch sending, if the work I did hurts you, then I am really sorry for that.  
> 
> I'm not offended, just tired going through the same driver over and
> over again, reporting things that are wrong/inappropriate to then
> realize you only addressed of a tiny portion of it in the following
> version. My last reviews were rather incomplete because of that, and
> now I'm giving up.
> 
> > Will fix this issue in the controller driver and will send the updated one.  
> 
> How? You say you'll fix the issue but I'm not even sure you understand
> what the issue is? Clearly, the patch you've posted doesn't fix
> anything, it's just papering over the fact that your controller driver
> is not supporting raw accesses (or at least, not supporting it
> properly).
> 
> Have you even looked at the datasheet you pointed to in patch 2 [1]?
> Just went through it, and found a field that's supposed to control the
> ECC engine activation: ecc_memcfg.ecc_mode. I don't see anything
> changing that field in your code, so I guess raw accesses are actually
> not really happening with the ECC engine disabled... 

Looks like I was wrong about that part, you seem to call
pl353_smc_set_ecc_mode(), just not in the right place (this should be
done in the read/write_page_raw()).

Also noticed the ecc_memcfg.ecc_extra_block field. Have you tried
setting it to 0 for your raw accesses to get rid of the extra
PL353_NAND_LAST_TRANSFER_LENGTH transfer?