Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Sasha Levin <sashal@kernel.org>
To:     linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc:     Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Sasha Levin <sashal@kernel.org>, linux-arm-msm@vger.kernel.org,
        linux-serial@vger.kernel.org
Subject: [PATCH AUTOSEL 5.1 036/141] tty: serial: msm_serial: avoid system lockup condition
Date:   Fri, 19 Jul 2019 00:01:01 -0400
Message-Id: <20190719040246.15945-36-sashal@kernel.org>
In-Reply-To: <20190719040246.15945-1-sashal@kernel.org>
References: <20190719040246.15945-1-sashal@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

[ Upstream commit ba3684f99f1b25d2a30b6956d02d339d7acb9799 ]

The function msm_wait_for_xmitr can be taken with interrupts
disabled. In order to avoid a potential system lockup - demonstrated
under stress testing conditions on SoC QCS404/5 - make sure we wait
for a bounded amount of time.

Tested on SoC QCS404.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/msm_serial.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 23833ad952ba..3657a24913fc 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -383,10 +383,14 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 
 static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
+	unsigned int timeout = 500000;
+
 	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
 		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
 			break;
 		udelay(1);
+		if (!timeout--)
+			break;
 	}
 	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
 }
-- 
2.20.1