Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932104AbVLHNyK (ORCPT ); Thu, 8 Dec 2005 08:54:10 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751186AbVLHNyK (ORCPT ); Thu, 8 Dec 2005 08:54:10 -0500 Received: from natnoddy.rzone.de ([81.169.145.166]:65514 "EHLO natnoddy.rzone.de") by vger.kernel.org with ESMTP id S1751184AbVLHNyI (ORCPT ); Thu, 8 Dec 2005 08:54:08 -0500 Subject: Re: [PATCH] x86_64: Display HPET timer option From: Erwin Rol To: Andi Kleen Cc: Linux Kernel In-Reply-To: <20051201211848.GE997@wotan.suse.de> References: <20051201204339.GC997@wotan.suse.de> <1133471197.3604.3.camel@xpc.home.erwinrol.com> <20051201211848.GE997@wotan.suse.de> Content-Type: multipart/mixed; boundary="=-F8+s2J2sN4j4PCWHEbR/" Date: Thu, 08 Dec 2005 14:53:45 +0100 Message-Id: <1134050026.3576.9.camel@xpc.home.erwinrol.com> Mime-Version: 1.0 X-Mailer: Evolution 2.5.2 (2.5.2-1) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 51810 Lines: 1328 --=-F8+s2J2sN4j4PCWHEbR/ Content-Type: text/plain Content-Transfer-Encoding: 7bit Hey Andi, bit late but here is the info (or at least part of), since I don't have a serial port on the computer I need to write down the panic info and than mail it, so I only wrote down what i thought was important. If you need other info from the panic let me know. The NMI watchdog panic give me the following info (when nmi watchdog is off it just hangs for ever) RIP: .... hpet_alloc + 882 Call Trace: late_hpet_init + 171 genl_init + 111 init + 541 uname -a Linux xpc.home.erwinrol.com 2.6.14-1.1743_FC5 #1 SMP Wed Dec 7 13:49:22 EST 2005 x86_64 x86_64 x86_64 GNU/Linux When there is a hang there is no output in the log files, so the dmesg is the output of nohpet. - Erwin On Thu, 2005-12-01 at 22:18 +0100, Andi Kleen wrote: > On Thu, Dec 01, 2005 at 10:06:37PM +0100, Erwin Rol wrote: > > On Thu, 2005-12-01 at 21:43 +0100, Andi Kleen wrote: > > > On Thu, Dec 01, 2005 at 12:30:03PM -0800, Zwane Mwaikambo wrote: > > > > On Thu, 1 Dec 2005, Linus Torvalds wrote: > > > > > > > > > On Thu, 1 Dec 2005, Zwane Mwaikambo wrote: > > > > > > > > > > > > Currently the HPET timer option isn't visible in menuconfig. > > > > > > > > > > Do you want it to? > > > > > > > > > > Why would you ever compile it out? > > > > > > > > For timer testing purposes i sometimes would like not to use the HPET. > > > > Would a runtime switch be preferred? > > > > > > nohpet already exists. > > > > > > > And luckily it does cause without "nohpet" i can't boot my shuttle > > ST20G5, the NMI watchdog kills it because ti hangs when initializing the > > hpet. If the nmi watchdog is off it just hangs for ever. > > Can you give details on the machine? lspci, dmidecode, acpidmp output, > boot log from the hang case? > > Then perhaps it can be blacklisted or the failure otherwise avoided. > > [Looks like I finally need to add DMI decode support to x86-64 too :-/] > > -Andi > > --=-F8+s2J2sN4j4PCWHEbR/ Content-Disposition: attachment; filename=dmesg_output.txt Content-Type: text/plain; name=dmesg_output.txt; charset=utf-8 Content-Transfer-Encoding: 7bit Bootdata ok (command line is ro root=LABEL=/ nohpet hda=ide-cdrom) Linux version 2.6.14-1.1743_FC5 (bhcompile@hs20-bc1-1.build.redhat.com) (gcc version 4.0.2 20051109 (Red Hat 4.0.2-6)) #1 SMP Wed Dec 7 13:49:22 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 XPC ) @ 0x00000000000f7e50 ACPI: RSDT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef3040 ACPI: FADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007fef74c0 ACPI: HPET (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000098) @ 0x000000007fef75c0 ACPI: MCFG (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef7640 ACPI: MADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef7400 ACPI: DSDT (v001 XPC ST20V10 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000007fef0000 Using 31 for the hash shift. Using node hash shift of 31 Bootmem setup node 0 0000000000000000-000000007fef0000 On node 0 totalpages: 513318 DMA zone: 2537 pages, LIFO batch:0 DMA32 zone: 510781 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) Checking aperture... CPU 0: aperture @ 50000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found SMP: Allowing 2 CPUs, 1 hotplug CPUs Built 1 zonelists Kernel command line: ro root=LABEL=/ nohpet hda=ide-cdrom ide_setup: hda=ide-cdrom Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 1808.748 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2048968k/2096064k available (2493k kernel code, 46704k reserved, 1671k data, 232k init) Calibrating delay using timer specific routine.. 3623.84 BogoMIPS (lpj=7247689) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.560 MHz APIC timer. Brought up 1 CPUs time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20050902 ACPI-0339: *** Error: Looking up [\_SB_.PCI0.LNKC] in namespace, AE_NOT_FOUND search_node ffff81007fe80b88 start_node ffff81007fe80b88 return_node 0000000000000000 ACPI-0339: *** Error: Looking up [\_SB_.PCI0.LNKB] in namespace, AE_NOT_FOUND search_node ffff81007fe8a4a8 start_node ffff81007fe8a4a8 return_node 0000000000000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 4000-403f claimed by ali7101 ACPI Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 1 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNK9] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:02.0 IO window: e000-efff MEM window: dfa00000-dfafffff PREFETCH window: dc000000-ddffffff PCI: Bridge: 0000:00:06.0 IO window: d000-dfff MEM window: dfe00000-dfefffff PREFETCH window: dfd00000-dfdfffff PCI: Bridge: 0000:00:19.0 IO window: c000-cfff MEM window: dfc00000-dfcfffff PREFETCH window: dfb00000-dfbfffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:19.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1134052065.508:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key DF64C97637BAD272 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PCI: Setting latency timer of device 0000:00:02.0 to 64 pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie01] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (45 C) Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:1f.0 GSI 16 sharing vector 0xC1 and IRQ 16 ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 19 (level, low) -> IRQ 193 ALI15X3: chipset revision 199 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8880-0x8887, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x8888-0x888f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xa, vid 0x6 ACPI wakeup devices: P2PB PES1 PES2 USB0 USB1 USB2 USB3 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 232k freed Write protecting the kernel read-only data: 875k SCSI subsystem initialized libata version 1.20 loaded. sata_uli 0000:00:1f.1: version 0.5 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 193 ata1: SATA max UDMA/133 cmd 0xFD00 ctl 0xFC02 bmdma 0xF900 irq 193 ata2: SATA max UDMA/133 cmd 0xFB00 ctl 0xFA02 bmdma 0xF908 irq 193 ata3: SATA max UDMA/133 cmd 0xFD08 ctl 0xFC06 bmdma 0xF910 irq 193 ata4: SATA max UDMA/133 cmd 0xFB08 ctl 0xFA06 bmdma 0xF918 irq 193 ata1: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:007f ata1: dev 0 ATA-6, max UDMA/133, 145226112 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_uli input: AT Translated Set 2 keyboard as /class/input/input0 ata2: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:007f ata2: dev 0 ATA-6, max UDMA/133, 145226112 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_uli ata3: no device found (phy stat 00000000) scsi2 : sata_uli ata4: no device found (phy stat 00000000) scsi3 : sata_uli Vendor: ATA Model: WDC WD740GD-00FL Rev: 31.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: WDC WD740GD-00FL Rev: 31.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: Attached scsi disk sdb md: raid0 personality registered as nr 2 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb4 ... md: adding sdb4 ... md: adding sda4 ... md: created md0 md: bind md: bind md: running: md0: setting max_sectors to 512, segment boundary to 131071 raid0: looking at sdb4 raid0: comparing sdb4(47439872) with sdb4(47439872) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda4 raid0: comparing sda4(47439872) with sdb4(47439872) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 94879744 blocks. raid0 : conf->hash_spacing is 94879744 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: md0: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 8814648 EXT3-fs: md0: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 986 types, 99 bools security: 55 classes, 14026 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev md0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) GSI 17 sharing vector 0xC9 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 18 (level, low) -> IRQ 201 ohci_hcd 0000:00:1c.0: OHCI Host Controller ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:1c.0: irq 201, io mem 0xdffff000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 201 ohci_hcd 0000:00:1c.1: OHCI Host Controller ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:1c.1: irq 201, io mem 0xdfffe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 201 ohci_hcd 0000:00:1c.2: OHCI Host Controller ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:1c.2: irq 201, io mem 0xdfffd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usb 1-2: new low speed USB device using ohci_hcd and address 2 GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.0[C] -> GSI 21 (level, low) -> IRQ 209 GSI 19 sharing vector 0xD9 and IRQ 19 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 217 ehci_hcd 0000:00:1c.3: EHCI Host Controller ehci_hcd 0000:00:1c.3: debug port 1 ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1c.3: irq 217, io mem 0xdfffc000 ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 8 ports detected hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... Linux video capture interface: v1.00 hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode... usb 1-2: device not accepting address 2, error -110 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture ieee1394: Initialized config rom entry `ip1394' tg3.c:v3.43 (Oct 24, 2005) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:30:1b:b8:99:73 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] ohci1394: $Rev: 1313 $ Ben Collins GSI 20 sharing vector 0xE1 and IRQ 20 ACPI: PCI Interrupt 0000:03:15.0[A] -> GSI 17 (level, low) -> IRQ 225 PCI: Via IRQ fixup for 0000:03:15.0, from 7 to 1 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[225] MMIO=[dfcff000-dfcff7ff] Max Packet=[2048] bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:03:16.0[A] -> GSI 18 (level, low) -> IRQ 201 bttv0: Bt878 (rev 2) at 0000:03:16.0, irq: 201, latency: 32, mmio: 0xdfbff000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 0-0050: Hauppauge model 61314, rev A1MC, serial# 3011724 tveeprom 0-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5) tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 0-0050: audio processor is MSP3415 (idx 6) tveeprom 0-0050: has no radio bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found msp3400 0-0040: chip=MSP3410D-B4 +nicam +simple mode=simple msp3400 0-0040: msp3410 daemon started bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .<4>bt878: Unknown symbol bttv_read_gpio bt878: Unknown symbol bttv_write_gpio bt878: Unknown symbol bttv_gpio_enable . ok ACPI: PCI Interrupt 0000:03:16.1[A] -> GSI 18 (level, low) -> IRQ 201 usb 1-2: new low speed USB device using ohci_hcd and address 4 input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1c.0-2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bb8000099d7] usb 2-3: new full speed USB device using ohci_hcd and address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver floppy0: no floppy controllers found ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. cdrom: open failed. cdrom: open failed. EXT3 FS on md0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2096472k swap on /dev/sda3. Priority:0 extents:1 across:2096472k Adding 2096472k swap on /dev/sdb3. Priority:0 extents:1 across:2096472k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.6 it87: Found IT8712F chip at 0x290, revision 6 it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface --=-F8+s2J2sN4j4PCWHEbR/ Content-Disposition: attachment; filename=dmidecode.txt Content-Type: text/plain; name=dmidecode.txt; charset=utf-8 Content-Transfer-Encoding: 7bit # dmidecode 2.7 SMBIOS 2.3 present. 47 structures occupying 1272 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 20 bytes. BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 09/09/2005 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: Shuttle Inc Product Name: ST20V10 Version: Serial Number: UUID: Not Present Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: Shuttle Inc Product Name: RS480-M1573 Version: Serial Number: Handle 0x0003, DMI type 3, 17 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes. Processor Information Socket Designation: Socket 939 Type: Central Processor Family: Athlon 64 Manufacturer: AMD ID: F0 0F 02 00 FF FB 8B 07 Signature: Extended Family 0, Extended Model 2, Stepping 0 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: AMD Athlon(tm) 64 Processor 3000+ Voltage: 1.4 V External Clock: 201 MHz Max Speed: 500 MHz Current Speed: 1810 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x000A L2 Cache Handle: 0x000C L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 24 bytes. Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 32 MB Maximum Total Memory Size: 128 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard EDO Memory Module Voltage: 5.0 V Associated Memory Slots: 4 0x0006 0x0007 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 5 ns Type: Unknown EDO Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A1 Bank Connections: 2 3 Current Speed: 5 ns Type: Unknown EDO Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A2 Bank Connections: None Current Speed: 5 ns Type: Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0009, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A3 Bank Connections: None Current Speed: 5 ns Type: Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000A, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000B, DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0010, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0011, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0012, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0013, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0014, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x0015, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Other Port Type: USB Handle 0x0016, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Other Port Type: USB Handle 0x0017, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Other Port Type: USB Handle 0x0018, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB4 External Connector Type: Other Port Type: USB Handle 0x0019, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB5 External Connector Type: Other Port Type: USB Handle 0x001A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB6 External Connector Type: Other Port Type: USB Handle 0x001B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB7 External Connector Type: Other Port Type: USB Handle 0x001C, DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x001D, DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x001E, DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x001F, DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x0020, DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x0021, DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: Available Length: Long ID: 8 Characteristics: 5.0 V is provided Handle 0x0022, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x0023, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 2 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0024, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0025, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0026, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0027, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A3 Bank Locator: Bank6/7 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0028, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0023 Partition Width: 0 Handle 0x0029, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0024 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: 1 Handle 0x002A, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0025 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: 1 Handle 0x002B, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0026 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: 1 Handle 0x002C, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0027 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: 1 Handle 0x002D, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x002E, DMI type 127, 4 bytes. End Of Table --=-F8+s2J2sN4j4PCWHEbR/ Content-Disposition: attachment; filename=lspci.txt Content-Type: text/plain; name=lspci.txt; charset=utf-8 Content-Transfer-Encoding: 7bit 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device f391 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Address: fee00000 Data: 40b1 Capabilities: [b0] #0d [0000] Capabilities: [b8] HyperTransport: MSI Mapping Capabilities: [100] Advanced Error Reporting 00:06.0 PCI bridge: ATI Technologies Inc: Unknown device 5a38 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Address: fee00000 Data: 40b9 Capabilities: [b0] #0d [0000] Capabilities: [b8] HyperTransport: MSI Mapping Capabilities: [100] Advanced Error Reporting 00:19.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- 00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device f391 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-