Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To:     linux-kernel@vger.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        stable@vger.kernel.org,
        Suganath Prabu <suganath-prabu.subramani@broadcom.com>,
        Christoph Hellwig <hch@lst.de>,
        "Martin K. Petersen" <martin.petersen@oracle.com>
Subject: [PATCH 5.2 116/131] scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
Date:   Mon,  5 Aug 2019 15:03:23 +0200
Message-Id: <20190805124959.723352420@linuxfoundation.org>
In-Reply-To: <20190805124951.453337465@linuxfoundation.org>
References: <20190805124951.453337465@linuxfoundation.org>
User-Agent: quilt/0.66
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.

Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.

E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.

Driver will set 63-bit DMA mask to ensure the above address will not be
used.

Cc: <stable@vger.kernel.org> # 5.1.20+
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mpt3sas/mpt3sas_base.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2683,6 +2683,8 @@ _base_config_dma_addressing(struct MPT3S
 {
 	u64 required_mask, coherent_mask;
 	struct sysinfo s;
+	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
+	int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64;
 
 	if (ioc->is_mcpu_endpoint)
 		goto try_32bit;
@@ -2692,17 +2694,17 @@ _base_config_dma_addressing(struct MPT3S
 		goto try_32bit;
 
 	if (ioc->dma_mask)
-		coherent_mask = DMA_BIT_MASK(64);
+		coherent_mask = DMA_BIT_MASK(dma_mask);
 	else
 		coherent_mask = DMA_BIT_MASK(32);
 
-	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) ||
+	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) ||
 	    dma_set_coherent_mask(&pdev->dev, coherent_mask))
 		goto try_32bit;
 
 	ioc->base_add_sg_single = &_base_add_sg_single_64;
 	ioc->sge_size = sizeof(Mpi2SGESimple64_t);
-	ioc->dma_mask = 64;
+	ioc->dma_mask = dma_mask;
 	goto out;
 
  try_32bit:
@@ -2724,7 +2726,7 @@ static int
 _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
 				      struct pci_dev *pdev)
 {
-	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) {
 		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
 			return -ENODEV;
 	}
@@ -4631,7 +4633,7 @@ _base_allocate_memory_pools(struct MPT3S
 		total_sz += sz;
 	} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
 
-	if (ioc->dma_mask == 64) {
+	if (ioc->dma_mask > 32) {
 		if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
 			ioc_warn(ioc, "no suitable consistent DMA mask for %s\n",
 				 pci_name(ioc->pdev));