Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Guillaume La Roque <glaroque@baylibre.com>
To:     daniel.lezcano@linaro.org, khilman@baylibre.com
Cc:     linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/6] arm64: dts: amlogic: g12: add temperature sensor
Date:   Tue,  6 Aug 2019 15:05:03 +0200
Message-Id: <20190806130506.8753-4-glaroque@baylibre.com>
In-Reply-To: <20190806130506.8753-1-glaroque@baylibre.com>
References: <20190806130506.8753-1-glaroque@baylibre.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add cpu and ddr temperature sensors for G12 Socs

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../boot/dts/amlogic/meson-g12-common.dtsi    | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 06e186ca41e3..a06298538614 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1353,6 +1353,26 @@
 				};
 			};
 
+			cpu_temp: temperature-sensor@34800 {
+				compatible = "amlogic,g12-cpu-thermal",
+					     "amlogic,g12-thermal";
+				reg = <0x0 0x34800 0x0 0x50>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			ddr_temp: temperature-sensor@34c00 {
+				compatible = "amlogic,g12-ddr-thermal",
+					     "amlogic,g12-thermal";
+				reg = <0x0 0x34c00 0x0 0x50>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
 			usb2_phy0: phy@36000 {
 				compatible = "amlogic,g12a-usb2-phy";
 				reg = <0x0 0x36000 0x0 0x2000>;
-- 
2.17.1