Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v2 2/2] mmc: sdhci: sdhci-pci-core: Add Genesis Logic
 GL975x support
To:     "Michael K. Johnson" <johnsonm@danlj.org>, ulf.hansson@linaro.org
Cc:     linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
        Ben Chuang <ben.chuang@genesyslogic.com.tw>
References: <20190726020754.GA12078@people.danlj.org>
From:   Adrian Hunter <adrian.hunter@intel.com>
Organization: Intel Finland Oy, Registered Address: PL 281, 00181 Helsinki,
 Business Identity Code: 0357606 - 4, Domiciled in Helsinki
Message-ID: <62a756ff-6432-fd43-5e90-038eb28045cd@intel.com>
Date:   Wed, 7 Aug 2019 15:25:25 +0300
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
 Thunderbird/60.8.0
MIME-Version: 1.0
In-Reply-To: <20190726020754.GA12078@people.danlj.org>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 26/07/19 5:07 AM, Michael K. Johnson wrote:
> Add support for the GL9750 and GL9755 chipsets.
> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
> Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
> 
> diff --git a/drivers/mmc/host/sdhci-gli.h b/drivers/mmc/host/sdhci-gli.h

I suggest creating sdhci-pci-gli.c and putting definitions there.  Have a
look at sdhci-pci-arasan.c, sdhci-pci-dwc-mshc.c or sdhci-pci-o2micro.c

> new file mode 100644
> index 000000000000..0acd35b6d3e2
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-gli.h
> @@ -0,0 +1,27 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +#ifndef __SDHCI_GLI_H
> +#define __SDHCI_GLI_H
> +
> +/* the define PCI_VENDOR_ID_GLI may put in kernel/include/linux/pci_ids.h */
> +#ifndef PCI_VENDOR_ID_GLI
> +#define PCI_VENDOR_ID_GLI		0x17a0
> +#endif

If it is in include/linux/pci_ids.h then this code should be removed

> +
> +/*  Genesys Logic extra registers */
> +#define SDHCI_GLI_9750_WT         0x800
> +#define SDHCI_GLI_9750_DRIVING    0x860
> +#define SDHCI_GLI_9750_PLL        0x864
> +#define SDHCI_GLI_9750_SW_CTRL    0x874
> +#define SDHCI_GLI_9750_MISC       0x878
> +
> +#define SDHCI_GLI_9750_TUNING_CONTROL		0x540
> +#define SDHCI_GLI_9750_TUNING_PARAMETERS	0x544
> +
> +#define GLI_9755_DRIVER_VER      "Genesys Logic (GL9755 v0.9.0-y190703)"
> +#define GLI_9750_DRIVER_VER      "Genesys Logic (GL9750 v0.9.0-y190703)"
> +
> +#define GLI_MAX_TUNING_LOOP 40
> +
> +void gli_set_9750(struct sdhci_host *host);
> +
> +#endif /* __SDHCI_GLI_H */
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 4154ee11b47d..b5c28df39de1 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -35,6 +35,7 @@
>  
>  #include "sdhci.h"
>  #include "sdhci-pci.h"
> +#include "sdhci-gli.h"
>  
>  static void sdhci_pci_hw_reset(struct sdhci_host *host);
>  
> @@ -1453,6 +1454,223 @@ static const struct sdhci_pci_fixes sdhci_rtsx = {
>  	.probe_slot	= rtsx_probe_slot,
>  };
>  
> +/* Genesys Logic chipset */
> +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
> +{
> +	struct sdhci_host *host = slot->host;
> +
> +	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> +	dev_info(&slot->chip->pdev->dev, "%s\n", GLI_9755_DRIVER_VER);
> +	sdhci_enable_v4_mode(host);
> +
> +	return 0;
> +}
> +
> +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
> +{
> +	u32 wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> +	u32 misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> +
> +	if ((wt_value & 0x1) == 0) {
> +		wt_value |= 0x1;
> +		sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +	}
> +
> +	misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> +	if (b) {
> +		misc_value |= 0x8;
> +		sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> +	} else {
> +		misc_value &= ~0x8;
> +		sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> +	}
> +
> +	wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> +	wt_value &= ~0x1;
> +	sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +
> +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
> +{
> +	int i;
> +	int rx_inv = 0;
> +
> +	for (rx_inv = 0; rx_inv < 2; rx_inv++) {
> +		if (rx_inv & 0x1)
> +			gli_set_9750_rx_inv(host, true);
> +		else
> +			gli_set_9750_rx_inv(host, false);
> +
> +		sdhci_start_tuning(host);
> +
> +		for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
> +			u16 ctrl;
> +
> +			sdhci_send_tuning(host, opcode);
> +
> +			if (!host->tuning_done) {
> +				if (rx_inv == 1) {
> +					pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
> +						mmc_hostname(host->mmc));
> +					sdhci_abort_tuning(host, opcode);
> +					return -ETIMEDOUT;
> +				}
> +				pr_info("%s: Tuning timeout, try next tuning\n",
> +					mmc_hostname(host->mmc));
> +				sdhci_abort_tuning(host, opcode);
> +				break;
> +			}
> +
> +			ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +			if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
> +				if (ctrl & SDHCI_CTRL_TUNED_CLK) {
> +					pr_info("%s: Tuning successful\n",
> +						mmc_hostname(host->mmc));
> +					return 0; /* Success! */
> +				}
> +				break;
> +			}
> +		}
> +	}
> +
> +	pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
> +		mmc_hostname(host->mmc));
> +	sdhci_reset_tuning(host);
> +	return -EAGAIN;
> +}
> +
> +static int gl9750_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	int err = 0;
> +	unsigned int tuning_count = 0;
> +	bool hs400_tuning;
> +
> +	hs400_tuning = host->flags & SDHCI_HS400_TUNING;
> +
> +	if (host->tuning_mode == SDHCI_TUNING_MODE_1)
> +		tuning_count = host->tuning_count;
> +
> +	/*
> +	 * The Host Controller needs tuning in case of SDR104 and DDR50
> +	 * mode, and for SDR50 mode when Use Tuning for SDR50 is set in
> +	 * the Capabilities register.
> +	 * If the Host Controller supports the HS200 mode then the
> +	 * tuning function has to be executed.
> +	 */
> +	switch (host->timing) {
> +	/* HS400 tuning is done in HS200 mode */
> +	case MMC_TIMING_MMC_HS400:
> +		err = -EINVAL;
> +		goto out;
> +
> +	case MMC_TIMING_MMC_HS200:
> +		/*
> +		 * Periodic re-tuning for HS400 is not expected to be needed, so
> +		 * disable it here.
> +		 */
> +		if (hs400_tuning)
> +			tuning_count = 0;
> +		break;
> +
> +	case MMC_TIMING_UHS_SDR104:
> +	case MMC_TIMING_UHS_DDR50:
> +		break;
> +
> +	case MMC_TIMING_UHS_SDR50:
> +		if (host->flags & SDHCI_SDR50_NEEDS_TUNING)
> +			break;
> +		/* FALLTHROUGH */
> +
> +	default:
> +		goto out;
> +	}
> +
> +	if (host->ops->platform_execute_tuning) {
> +		err = host->ops->platform_execute_tuning(host, opcode);
> +		goto out;
> +	}
> +
> +	host->mmc->retune_period = tuning_count;
> +
> +	if (host->tuning_delay < 0)
> +		host->tuning_delay = opcode == MMC_SEND_TUNING_BLOCK;
> +
> +	gli_set_9750(host);
> +	host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
> +
> +	sdhci_end_tuning(host);
> +out:
> +	host->flags &= ~SDHCI_HS400_TUNING;
> +
> +	return err;
> +}
> +
> +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> +{
> +	struct sdhci_host *host = slot->host;
> +	struct mmc_host_ops *ops = &host->mmc_host_ops;
> +
> +	u32 gli_wt = sdhci_readl(host, SDHCI_GLI_9750_WT);
> +
> +	dev_info(&slot->chip->pdev->dev, "%s\n", GLI_9750_DRIVER_VER);
> +	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> +
> +	if ((gli_wt & 0x1) == 0) {
> +		gli_wt |= 0x1;
> +		sdhci_writel(host, gli_wt, SDHCI_GLI_9750_WT);
> +	}
> +
> +	gli_wt = sdhci_readl(host, SDHCI_GLI_9750_WT);
> +	gli_wt &= ~0x1;
> +	sdhci_writel(host, gli_wt, SDHCI_GLI_9750_WT);
> +
> +	sdhci_enable_v4_mode(host);
> +
> +	ops->execute_tuning = gl9750_execute_tuning;
> +
> +	return 0;
> +}
> +
> +static void sdhci_gli_voltage_switch(struct sdhci_host *host)
> +{
> +	usleep_range(5000, 5500);
> +}
> +
> +static const struct sdhci_ops sdhci_gl9755_ops = {
> +	.set_clock			= sdhci_set_clock,
> +	.enable_dma			= sdhci_pci_enable_dma,
> +	.set_bus_width			= sdhci_set_bus_width,
> +	.reset				= sdhci_reset,
> +	.set_uhs_signaling		= sdhci_set_uhs_signaling,
> +	.hw_reset			= sdhci_pci_hw_reset,
> +	.voltage_switch			= sdhci_gli_voltage_switch,
> +};
> +
> +static const struct sdhci_pci_fixes sdhci_gl9755 = {
> +	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> +	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
> +	.probe_slot	= gli_probe_slot_gl9755,
> +	.ops            = &sdhci_gl9755_ops,
> +};
> +
> +static const struct sdhci_ops sdhci_gl9750_ops = {
> +	.set_clock			= sdhci_set_clock,
> +	.enable_dma			= sdhci_pci_enable_dma,
> +	.set_bus_width			= sdhci_set_bus_width,
> +	.reset				= sdhci_reset,
> +	.set_uhs_signaling		= sdhci_set_uhs_signaling,
> +	.hw_reset			= sdhci_pci_hw_reset,
> +	.voltage_switch			= sdhci_gli_voltage_switch,
> +};
> +
> +static const struct sdhci_pci_fixes sdhci_gl9750 = {
> +	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> +	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
> +	.probe_slot	= gli_probe_slot_gl9750,
> +	.ops            = &sdhci_gl9750_ops,
> +};
> +
>  /*AMD chipset generation*/
>  enum amd_chipset_gen {
>  	AMD_CHIPSET_BEFORE_ML,
> @@ -1682,6 +1900,8 @@ static const struct pci_device_id pci_ids[] = {
>  	SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
>  	SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
>  	SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
> +	SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
> +	SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
>  	SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
>  	/* Generic SD host controller */
>  	{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> index e5dc6e44c7a4..78e6b631e252 100644
> --- a/drivers/mmc/host/sdhci-pci.h
> +++ b/drivers/mmc/host/sdhci-pci.h
> @@ -65,6 +65,9 @@
>  
>  #define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
>  
> +#define PCI_DEVICE_ID_GLI_9755		0x9755
> +#define PCI_DEVICE_ID_GLI_9750		0x9750
> +
>  /*
>   * PCI device class and mask
>   */
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 14957578bf2e..1ccf1b692d04 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -25,6 +25,8 @@
>  
>  #include <linux/leds.h>
>  
> +#include <linux/pci.h>
> +
>  #include <linux/mmc/mmc.h>
>  #include <linux/mmc/host.h>
>  #include <linux/mmc/card.h>
> @@ -32,6 +34,8 @@
>  #include <linux/mmc/slot-gpio.h>
>  
>  #include "sdhci.h"
> +#include "sdhci-pci.h"
> +#include "sdhci-gli.h"

Vendor specific changes do not belong in sdhci.c

>  
>  #define DRIVER_NAME "sdhci"
>  
> @@ -50,6 +54,8 @@ static void sdhci_finish_data(struct sdhci_host *);
>  
>  static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
>  
> +static bool gli_is_9750(struct sdhci_host *);
> +
>  void sdhci_dumpregs(struct sdhci_host *host)
>  {
>  	SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n");
> @@ -328,6 +334,8 @@ static void sdhci_init(struct sdhci_host *host, int soft)
>  
>  	host->cqe_on = false;
>  
> +	gli_set_9750(host);

Maybe look at using the sdhci_ops ->reset() callback.

> +
>  	if (soft) {
>  		/* force clock reconfiguration */
>  		host->clock = 0;
> @@ -2326,7 +2334,7 @@ void sdhci_reset_tuning(struct sdhci_host *host)
>  }
>  EXPORT_SYMBOL_GPL(sdhci_reset_tuning);
>  
> -static void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode)
> +void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode)
>  {
>  	sdhci_reset_tuning(host);
>  
> @@ -2337,6 +2345,7 @@ static void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode)
>  
>  	mmc_abort_tuning(host->mmc, opcode);
>  }
> +EXPORT_SYMBOL_GPL(sdhci_abort_tuning);

If you need to export sdhci_abort_tuning, then please make it a separate patch.

>  
>  /*
>   * We use sdhci_send_tuning() because mmc_send_tuning() is not a good fit. SDHCI
> @@ -2493,9 +2502,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
>  		host->tuning_delay = opcode == MMC_SEND_TUNING_BLOCK;
>  
>  	sdhci_start_tuning(host);
> -
>  	host->tuning_err = __sdhci_execute_tuning(host, opcode);
> -
>  	sdhci_end_tuning(host);
>  out:
>  	host->flags &= ~SDHCI_HS400_TUNING;
> @@ -4090,6 +4097,12 @@ int sdhci_setup_host(struct sdhci_host *host)
>  	 * value.
>  	 */
>  	max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
> +
> +	if (gli_is_9750(host)) {
> +		if (!(max_current_caps & 0xff))
> +			max_current_caps |= 0xc8;
> +	}

Vendor specific changes do not belong in sdhci.c

Look at using sdhci I/O accessors (refer CONFIG_MMC_SDHCI_IO_ACCESSORS)
instead

> +
>  	if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
>  		int curr = regulator_get_current_limit(mmc->supply.vmmc);
>  		if (curr > 0) {
> @@ -4269,6 +4282,106 @@ void sdhci_cleanup_host(struct sdhci_host *host)
>  }
>  EXPORT_SYMBOL_GPL(sdhci_cleanup_host);
>  
> +// for Genesys Logic
> +void gli_set_9750(struct sdhci_host *host)
> +{
> +	u32 wt_value = 0;
> +	u32 driving_value = 0;
> +	u32 pll_value = 0;
> +	u32 sw_ctrl_value = 0;
> +	u32 misc_value = 0;
> +	u32 parameter_value = 0;
> +	u32 control_value = 0;
> +
> +	u16 ctrl2 = 0;
> +
> +	if (!gli_is_9750(host))
> +		return;
> +
> +	wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> +	if ((wt_value & 0x1) == 0) {
> +		wt_value |= 0x1;
> +		sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +	}
> +
> +	driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
> +	pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
> +	sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
> +	misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> +	parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
> +	control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> +	driving_value &= ~(0x0C000FFF);
> +	driving_value |= 0x0C000FFF;
> +	sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
> +
> +	sw_ctrl_value |= 0xc0;
> +	sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
> +
> +	// reset the tuning flow after reinit and before starting tuning
> +	pll_value |= 0x800000; // bit23-1
> +	pll_value &= ~(0x00700000); // bit22:20-0
> +
> +	misc_value &= ~(0x8); // bit3-0
> +	misc_value &= ~(0x4); // bit2-0
> +
> +	misc_value &= ~(0x70); // bit6:4-0
> +	misc_value |= 0x50; // bit6:4-5
> +
> +	parameter_value &= ~(0x7); // bit2:0-0
> +	parameter_value |= 0x1; // bit2:0-1
> +
> +	control_value &= ~(0x190000); // bit20:19-0, bit16-0
> +	control_value |=   0x110000; // bit20:19-b10, bit16-1
> +
> +	sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
> +	sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> +
> +	// disable tuned clk
> +	ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +	ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> +	sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> +	// 540 enable tuning parameters control
> +	control_value |= 0x10;
> +	sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> +	// write 544 tuning parameters
> +	sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
> +
> +	// 540 disable tuning parameters control
> +	control_value &= ~0x10;
> +	sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> +	// clear tuned clk
> +	ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +	ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> +	sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> +	udelay(1);
> +	wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> +	wt_value &= ~0x1;
> +	sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +EXPORT_SYMBOL_GPL(gli_set_9750);
> +
> +bool gli_is_9750(struct sdhci_host *host)
> +{
> +	struct sdhci_pci_slot *slot = sdhci_priv(host);
> +	struct sdhci_pci_chip *chip;
> +	struct pci_dev *pdev;
> +
> +	chip = slot->chip;
> +	pdev = chip->pdev;
> +
> +	if (pdev->vendor == PCI_VENDOR_ID_GLI &&
> +	    pdev->device == PCI_DEVICE_ID_GLI_9750) {
> +		return true;
> +	}
> +
> +	return false;
> +}
> +

Vendor specific changes do not belong in sdhci.c

>  int __sdhci_add_host(struct sdhci_host *host)
>  {
>  	unsigned int flags = WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_HIGHPRI;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 72601a4d2e95..437bab3af195 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -797,5 +797,6 @@ void sdhci_start_tuning(struct sdhci_host *host);
>  void sdhci_end_tuning(struct sdhci_host *host);
>  void sdhci_reset_tuning(struct sdhci_host *host);
>  void sdhci_send_tuning(struct sdhci_host *host, u32 opcode);
> +void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode);
>  
>  #endif /* __SDHCI_HW_H */
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 70e86148cb1e..e668da5c8df5 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2403,6 +2403,7 @@
>  #define PCI_DEVICE_ID_RDC_R6061		0x6061
>  #define PCI_DEVICE_ID_RDC_D1010		0x1010
>  
> +#define PCI_VENDOR_ID_GLI		0x17a0

Better as a separate patch.

>  #define PCI_VENDOR_ID_LENOVO		0x17aa
>  
>  #define PCI_VENDOR_ID_QCOM		0x17cb
>