Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   k.konieczny@partner.samsung.com
To:     k.konieczny@partner.samsung.com
Cc:     Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Kukjin Kim <kgene@kernel.org>,
        Kyungmin Park <kyungmin.park@samsung.com>,
        Mark Rutland <mark.rutland@arm.com>,
        MyungJoo Ham <myungjoo.ham@samsung.com>,
        Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
        Stephen Boyd <sboyd@kernel.org>,
        Viresh Kumar <vireshk@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: [PATCH v5 1/4] devfreq: exynos-bus: correct clock enable sequence
Date:   Wed,  7 Aug 2019 15:38:35 +0200
Message-Id: <20190807133838.14678-2-k.konieczny@partner.samsung.com>
In-Reply-To: <20190807133838.14678-1-k.konieczny@partner.samsung.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20190807133838.14678-1-k.konieczny@partner.samsung.com>
        <CGME20190807133856eucas1p2a893cd24096b089307e4216a1033a742@eucas1p2.samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Regulators should be enabled before clocks to avoid h/w hang. This
require change in exynos_bus_probe() to move exynos_bus_parse_of()
after exynos_bus_parent_parse_of() and change in error handling.
Similar change is needed in exynos_bus_exit() where clock should be
disabled before regulators.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
Changes:
v5:
- added Acked-by tag
v4:
- move regulator disable after clock disable
- remove unrelated changes
- add disabling regulators in error path in exynos_bus_probe()

---
 drivers/devfreq/exynos-bus.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 486cc5b422f1..f34fa26f00d0 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -194,11 +194,10 @@ static void exynos_bus_exit(struct device *dev)
 	if (ret < 0)
 		dev_warn(dev, "failed to disable the devfreq-event devices\n");
 
-	if (bus->regulator)
-		regulator_disable(bus->regulator);
-
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
+	if (bus->regulator)
+		regulator_disable(bus->regulator);
 }
 
 /*
@@ -386,6 +385,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	struct exynos_bus *bus;
 	int ret, max_state;
 	unsigned long min_freq, max_freq;
+	bool passive = false;
 
 	if (!np) {
 		dev_err(dev, "failed to find devicetree node\n");
@@ -399,27 +399,27 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	bus->dev = &pdev->dev;
 	platform_set_drvdata(pdev, bus);
 
-	/* Parse the device-tree to get the resource information */
-	ret = exynos_bus_parse_of(np, bus);
-	if (ret < 0)
-		return ret;
-
 	profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
-	if (!profile) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!profile)
+		return -ENOMEM;
 
 	node = of_parse_phandle(dev->of_node, "devfreq", 0);
 	if (node) {
 		of_node_put(node);
-		goto passive;
+		passive = true;
 	} else {
 		ret = exynos_bus_parent_parse_of(np, bus);
+		if (ret < 0)
+			return ret;
 	}
 
+	/* Parse the device-tree to get the resource information */
+	ret = exynos_bus_parse_of(np, bus);
 	if (ret < 0)
-		goto err;
+		goto err_reg;
+
+	if (passive)
+		goto passive;
 
 	/* Initialize the struct profile and governor data for parent device */
 	profile->polling_ms = 50;
@@ -510,6 +510,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
 err:
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
+err_reg:
+	if (!passive)
+		regulator_disable(bus->regulator);
 
 	return ret;
 }
-- 
2.22.0