Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20190809103235.16338-1-tbogendoerfer@suse.de> <20190809103235.16338-10-tbogendoerfer@suse.de>
In-Reply-To: <20190809103235.16338-10-tbogendoerfer@suse.de>
From:   Jonas Gorski <jonas.gorski@gmail.com>
Date:   Wed, 14 Aug 2019 15:20:14 +0200
Message-ID: <CAOiHx=kuQtOuNfsJ+fDrps+hbrbp5cPujmQpi8Vfy+0qeP8dtA@mail.gmail.com>
Subject: Re: [PATCH v4 9/9] Input: add IOC3 serio driver
To:     Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc:     Ralf Baechle <ralf@linux-mips.org>,
        Paul Burton <paul.burton@mips.com>,
        James Hogan <jhogan@kernel.org>,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Lee Jones <lee.jones@linaro.org>,
        "David S. Miller" <davem@davemloft.net>,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        Alessandro Zummo <a.zummo@towertech.it>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Jiri Slaby <jslaby@suse.com>,
        Evgeniy Polyakov <zbr@ioremap.net>, linux-mips@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
        Network Development <netdev@vger.kernel.org>,
        linux-rtc@vger.kernel.org, linux-serial@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

On Fri, 9 Aug 2019 at 12:33, Thomas Bogendoerfer <tbogendoerfer@suse.de> wrote:
>
> This patch adds a platform driver for supporting keyboard and mouse
> interface of SGI IOC3 chips.
>
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> ---
>  drivers/input/serio/Kconfig   |  10 +++
>  drivers/input/serio/Makefile  |   1 +
>  drivers/input/serio/ioc3kbd.c | 163 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 174 insertions(+)
>  create mode 100644 drivers/input/serio/ioc3kbd.c
>
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index f3e18f8ef9ca..373a1646019e 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -165,6 +165,16 @@ config SERIO_MACEPS2
>           To compile this driver as a module, choose M here: the
>           module will be called maceps2.
>
> +config SERIO_SGI_IOC3
> +       tristate "SGI IOC3 PS/2 controller"
> +       depends on SGI_MFD_IOC3
> +       help
> +         Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
> +         and you want to attach and use a keyboard, mouse, or both.
> +
> +         To compile this driver as a module, choose M here: the
> +         module will be called ioc3kbd.
> +
>  config SERIO_LIBPS2
>         tristate "PS/2 driver library"
>         depends on SERIO_I8042 || SERIO_I8042=n
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index 67950a5ccb3f..6d97bad7b844 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC)         += hp_sdc_mlc.o hil_mlc.o
>  obj-$(CONFIG_SERIO_PCIPS2)     += pcips2.o
>  obj-$(CONFIG_SERIO_PS2MULT)    += ps2mult.o
>  obj-$(CONFIG_SERIO_MACEPS2)    += maceps2.o
> +obj-$(CONFIG_SERIO_SGI_IOC3)   += ioc3kbd.o
>  obj-$(CONFIG_SERIO_LIBPS2)     += libps2.o
>  obj-$(CONFIG_SERIO_RAW)                += serio_raw.o
>  obj-$(CONFIG_SERIO_AMS_DELTA)  += ams_delta_serio.o
> diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
> new file mode 100644
> index 000000000000..6840e3c23fed
> --- /dev/null
> +++ b/drivers/input/serio/ioc3kbd.c
> @@ -0,0 +1,163 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SGI IOC3 PS/2 controller driver for linux
> + *
> + * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
> + *
> + * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
> + *               Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/serio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/sn/ioc3.h>
> +
> +struct ioc3kbd_data {
> +       struct ioc3_serioregs __iomem *regs;
> +       struct serio *kbd, *aux;
> +       int irq;
> +};
> +
> +static int ioc3kbd_write(struct serio *dev, u8 val)
> +{
> +       struct ioc3kbd_data *d = dev->port_data;
> +       unsigned long timeout = 0;
> +       u32 mask;
> +
> +       mask = (dev == d->aux) ? KM_CSR_M_WRT_PEND : KM_CSR_K_WRT_PEND;
> +       while ((readl(&d->regs->km_csr) & mask) && (timeout < 1000)) {
> +               udelay(100);
> +               timeout++;
> +       }
> +
> +       if (timeout >= 1000)
> +               return -ETIMEDOUT;
> +
> +       writel(val, dev == d->aux ? &d->regs->m_wd : &d->regs->k_wd);
> +
> +       return 0;
> +}
> +
> +static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
> +{
> +       struct ioc3kbd_data *d = dev_id;
> +       u32 data_k, data_m;
> +
> +       data_k = readl(&d->regs->k_rd);
> +       data_m = readl(&d->regs->m_rd);
> +
> +       if (data_k & KM_RD_VALID_0)
> +               serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_0_SHIFT) & 0xff,
> +                               0);
> +       if (data_k & KM_RD_VALID_1)
> +               serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_1_SHIFT) & 0xff,
> +                               0);
> +       if (data_k & KM_RD_VALID_2)
> +               serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_2_SHIFT) & 0xff,
> +                               0);
> +       if (data_m & KM_RD_VALID_0)
> +               serio_interrupt(d->aux, (data_m >> KM_RD_DATA_0_SHIFT) & 0xff,
> +                               0);
> +       if (data_m & KM_RD_VALID_1)
> +               serio_interrupt(d->aux, (data_m >> KM_RD_DATA_1_SHIFT) & 0xff,
> +                               0);
> +       if (data_m & KM_RD_VALID_2)
> +               serio_interrupt(d->aux, (data_m >> KM_RD_DATA_2_SHIFT) & 0xff,
> +                               0);
> +
> +       return 0;
> +}
> +
> +static int ioc3kbd_probe(struct platform_device *pdev)
> +{
> +       struct ioc3_serioregs __iomem *regs;
> +       struct device *dev = &pdev->dev;
> +       struct ioc3kbd_data *d;
> +       struct serio *sk, *sa;
> +       int irq, ret;
> +
> +       regs = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(regs))
> +               return PTR_ERR(regs);
> +
> +       irq = platform_get_irq(pdev, 0);
> +       if (irq < 0)
> +               return -ENXIO;
> +
> +       d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);

&pdev->dev => dev

> +       if (!d)
> +               return -ENOMEM;
> +
> +       sk = kzalloc(sizeof(*sk), GFP_KERNEL);

any reason not to devm_kzalloc this as well? Then you won't need to
manually free it in the error cases.

> +       if (!sk)
> +               return -ENOMEM;
> +
> +       sa = kzalloc(sizeof(*sa), GFP_KERNEL);

same here.

> +       if (!sa) {
> +               kfree(sk);
> +               return -ENOMEM;
> +       }
> +
> +       sk->id.type = SERIO_8042;
> +       sk->write = ioc3kbd_write;
> +       snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
> +       snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
> +       sk->port_data = d;
> +       sk->dev.parent = &pdev->dev;

&pdev->dev => dev

> +
> +       sa->id.type = SERIO_8042;
> +       sa->write = ioc3kbd_write;
> +       snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
> +       snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
> +       sa->port_data = d;
> +       sa->dev.parent = dev;
> +
> +       d->regs = regs;
> +       d->kbd = sk;
> +       d->aux = sa;
> +       d->irq = irq;
> +
> +       platform_set_drvdata(pdev, d);
> +       serio_register_port(d->kbd);
> +       serio_register_port(d->aux);
> +
> +       ret = devm_request_irq(&pdev->dev, irq, ioc3kbd_intr, IRQF_SHARED,
> +                              "ioc3-kbd", d);
> +       if (ret) {
> +               dev_err(&pdev->dev, "could not request IRQ %d\n", irq);
> +               serio_unregister_port(d->kbd);
> +               serio_unregister_port(d->aux);
> +               kfree(sk);
> +               kfree(sa);
> +               return ret;
> +       }
> +       return 0;
> +}
> +
> +static int ioc3kbd_remove(struct platform_device *pdev)
> +{
> +       struct ioc3kbd_data *d = platform_get_drvdata(pdev);
> +
> +       devm_free_irq(&pdev->dev, d->irq, d);
> +       serio_unregister_port(d->kbd);
> +       serio_unregister_port(d->aux);
> +       return 0;
> +}

and on that topic, won't you need to kfree d->kbd and d->aux here?
Unless you devm_kzalloc'd them.

Alternatively you could also just embed the two serio structs into
ioc3kbd_data, then you only need one allocation instead of three.


Regards

Jonas