Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Kevin Hilman <khilman@baylibre.com>
To:     Neil Armstrong <narmstrong@baylibre.com>, ulf.hansson@linaro.org
Cc:     Neil Armstrong <narmstrong@baylibre.com>, linux-pm@vger.kernel.org,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/5] arm64: dts: meson-sm1-sei610: add HDMI display support
In-Reply-To: <20190821114121.10430-5-narmstrong@baylibre.com>
References: <20190821114121.10430-1-narmstrong@baylibre.com> <20190821114121.10430-5-narmstrong@baylibre.com>
Date:   Wed, 21 Aug 2019 16:31:58 -0700
Message-ID: <7ho90i5c41.fsf@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Neil Armstrong <narmstrong@baylibre.com> writes:

> Update compatible of the pwc-vpu node and add the HDMI support nodes
> for the Amlogic SM1 Based SEI610 Board.

I think this changelog is out of date.  It's not doing anything with the
VPU pwrc node.

Kevin

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../boot/dts/amlogic/meson-sm1-sei610.dts     | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 12dab0ba2f26..66bd3bfbaf91 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -51,6 +51,17 @@
>  		};
>  	};
>  
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&hdmi_tx_tmds_out>;
> +			};
> +		};
> +	};
> +
>  	leds {
>  		compatible = "gpio-leds";
>  
> @@ -177,6 +188,18 @@
>  	phy-mode = "rmii";
>  };
>  
> +&hdmi_tx {
> +	status = "okay";
> +	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
> +};
> +
>  &i2c3 {
>  	status = "okay";
>  	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> -- 
> 2.22.0