Received: by 2002:a25:8b12:0:0:0:0:0 with SMTP id i18csp1174671ybl; Thu, 22 Aug 2019 10:23:21 -0700 (PDT) X-Google-Smtp-Source: APXvYqwnU1EBx8hQvvozi01dxBG9Yl1Cr3VXbTd8No9NCh3ZNfO9k6MhFZ3SQeyA1QzCM26+OACJ X-Received: by 2002:a65:5348:: with SMTP id w8mr316053pgr.176.1566494600796; Thu, 22 Aug 2019 10:23:20 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1566494600; cv=none; d=google.com; s=arc-20160816; b=X3z3BKPRpKhgzNfhR1RxikBcw2DnhJtcPiA859jZIiOpua2WGZAuUTyeF71RzuXT2t C7xDs+F6RyZxyMGOU8Hcx3DVT/8nSB32+23CGngDlk2BWalWATu5OethVaTHVh/nANKO /1v0SEyZSFfFskz0b8nvpcHZQVvwpb2fXd4RxmBKPil01jLlIt14rldjn+eT1iF90qea g+v8TKrCg2YWQ2pnJiWKxgSfHcdR19Ls1oHnBYpWoS20Rd9KddDAqofZ4CsZX4Y9cN7f yM0cLWlt2Q5uKjGuBCHKZABkuKCbkGdxtFzkb6cMobQfz0FYmx+Hqk2XHnwX8FF0Uowp +qgg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:user-agent:in-reply-to :content-disposition:mime-version:references:message-id:subject:cc :to:from:date; bh=HeWyQ5Om6gxByLId5yKaWQ79dpzid07taLIeXhqoAyw=; b=VGxzk3nwK2NzEPThW28qzTSH8igY08Jtj4jRRtdedxtUjiPkAimLF8Gj8e8H52oJyR 2pLWeJY3w6G667CxJp5nMwwTfsHITpgwsJH127K9gv+lYwUrjW1O2e5XO5vFkOj4duVs ieVOetlHEeIktwPLybWHbdEsqlkzqRlahZbAamGBj0MF3dFbIJC3azVJ9I1+bkLiyycZ uozd7eNHv47+I5j9d/i39B4RxoBoQRgWKmoZuc0hYebrXhhTVlHeum8OeRxGBNSXuUCo QVgverJezoo0HUATHy0yH51jRsnR4Y0Eg5tDRB/GG8WcMo/JW0oVaAH/XMOTlRsKxKOH 5bVQ== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id j11si84554plt.109.2019.08.22.10.23.05; Thu, 22 Aug 2019 10:23:20 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2390027AbfHVQm4 (ORCPT + 99 others); Thu, 22 Aug 2019 12:42:56 -0400 Received: from relay2-d.mail.gandi.net ([217.70.183.194]:53871 "EHLO relay2-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731880AbfHVQmz (ORCPT ); Thu, 22 Aug 2019 12:42:55 -0400 X-Originating-IP: 87.18.63.98 Received: from uno.localdomain (unknown [87.18.63.98]) (Authenticated sender: jacopo@jmondi.org) by relay2-d.mail.gandi.net (Postfix) with ESMTPSA id 9540B40002; Thu, 22 Aug 2019 16:42:47 +0000 (UTC) Date: Thu, 22 Aug 2019 18:44:12 +0200 From: Jacopo Mondi To: Laurent Pinchart Cc: Ulrich Hecht , Jacopo Mondi , kieran.bingham+renesas@ideasonboard.com, airlied@linux.ie, daniel@ffwll.ch, koji.matsuoka.xm@renesas.com, muroya@ksk.co.jp, VenkataRajesh.Kalakodima@in.bosch.com, Harsha.ManjulaMallikarjun@in.bosch.com, linux-renesas-soc@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v2 14/19] drm: rcar-du: Add support for CMM Message-ID: <20190822164404.czsfo2c6wusrslek@uno.localdomain> References: <20190706140746.29132-1-jacopo+renesas@jmondi.org> <20190706140746.29132-15-jacopo+renesas@jmondi.org> <898081800.61387.1563283024145@webmail.strato.com> <20190820173744.GG10820@pendragon.ideasonboard.com> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="udwnqrrxkfgyy2n6" Content-Disposition: inline In-Reply-To: <20190820173744.GG10820@pendragon.ideasonboard.com> User-Agent: NeoMutt/20180716 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org --udwnqrrxkfgyy2n6 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Hi Ulrich, On Tue, Aug 20, 2019 at 08:37:44PM +0300, Laurent Pinchart wrote: > Hello, > > On Tue, Jul 16, 2019 at 03:17:04PM +0200, Ulrich Hecht wrote: > > > On July 6, 2019 at 4:07 PM Jacopo Mondi wrote: > > > > > > Add a driver for the R-Car Display Unit Color Correction Module. > > > > > > In most of Gen3 SoCs, each DU output channel is provided with a CMM unit > > > to perform image enhancement and color correction. > > > > > > Add support for CMM through a driver that supports configuration of > > > the 1-dimensional LUT table. More advanced CMM feature will be > > > implemented on top of this basic one. > > > > > > Signed-off-by: Jacopo Mondi > > > --- > > > drivers/gpu/drm/rcar-du/Kconfig | 7 + > > > drivers/gpu/drm/rcar-du/Makefile | 1 + > > > drivers/gpu/drm/rcar-du/rcar_cmm.c | 292 +++++++++++++++++++++++++++++ > > > drivers/gpu/drm/rcar-du/rcar_cmm.h | 38 ++++ > > > 4 files changed, 338 insertions(+) > > > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c > > > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h > > > > > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig > > > index 1529849e217e..539d232790d1 100644 > > > --- a/drivers/gpu/drm/rcar-du/Kconfig > > > +++ b/drivers/gpu/drm/rcar-du/Kconfig > > > @@ -13,6 +13,13 @@ config DRM_RCAR_DU > > > Choose this option if you have an R-Car chipset. > > > If M is selected the module will be called rcar-du-drm. > > > > > > +config DRM_RCAR_CMM > > > + bool "R-Car DU Color Management Module (CMM) Support" > > > + depends on DRM && OF > > > + depends on DRM_RCAR_DU > > > + help > > > + Enable support for R-Car Color Management Module (CMM). > > > + > > > config DRM_RCAR_DW_HDMI > > > tristate "R-Car DU Gen3 HDMI Encoder Support" > > > depends on DRM && OF > > > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile > > > index 6c2ed9c46467..4d1187ccc3e5 100644 > > > --- a/drivers/gpu/drm/rcar-du/Makefile > > > +++ b/drivers/gpu/drm/rcar-du/Makefile > > > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ > > > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o > > > rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o > > > > > > +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o > > > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o > > > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o > > > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > > > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c > > > new file mode 100644 > > > index 000000000000..76ed3fce2b33 > > > --- /dev/null > > > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c > > > @@ -0,0 +1,292 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * rcar_cmm.c -- R-Car Display Unit Color Management Module > > > + * > > > + * Copyright (C) 2019 Jacopo Mondi > > > + */ > > > + > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > + > > > +#include > > > + > > > +#include "rcar_cmm.h" > > > + > > > +#define CM2_LUT_CTRL 0x0000 > > > +#define CM2_LUT_CTRL_EN BIT(0) > > > +#define CM2_LUT_TBLA_BASE 0x0600 > > > +#define CM2_LUT_TBLA(__i) (CM2_LUT_TBLA_BASE + (__i) * 4) > > > + > > > +struct rcar_cmm { > > > + struct clk *clk; > > > + void __iomem *base; > > > + bool enabled; > > > + > > > + /* > > > + * restore: LUT restore flag > > > + * running: LUT operating flag > > > + * size: Number of programmed entries in the LUT table > > > + * table: Scratch buffer where to store the LUT table entries to be > > > + * later restored. > > > + */ > > > + struct { > > > + bool restore; > > > + bool running; > > > + unsigned int size; > > > + struct drm_color_lut table[CMM_GAMMA_LUT_SIZE]; > > > + } lut; > > > +}; > > > + > > > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg) > > > +{ > > > + return ioread32(rcmm->base + reg); > > > +} > > > + > > > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data) > > > +{ > > > + iowrite32(data, rcmm->base + reg); > > > +} > > > + > > > +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm, unsigned int size, > > > + struct drm_color_lut *lut) > > > +{ > > > + unsigned int i; > > > + > > > + for (i = 0; i < size; ++i) { > > > + struct drm_color_lut *entry = &lut[i]; > > > + > > > + u32 val = (entry->red & 0xff) << 16 | > > > + (entry->green & 0xff) << 8 | > > > + (entry->blue & 0xff); > > > > I don't think it's correct to cut off the high bits here. There is a > > function "drm_color_lut_extract()" for converting drm_color_lut values > > to hardware precision. > > Oh, I see! the value received from userspace in 16-bits precision needs to be rescaled to the hw supported one! Thanks, I totally missed this! > > > + rcar_cmm_write(rcmm, CM2_LUT_TBLA(i), val); > > > + } > > > +} > > > + > > > +/** > > > + * rcar_cmm_setup() - configure the CMM unit > > > + * > > > + * @pdev: The platform device associated with the CMM instance > > > + * @config: The CRTC provided configuration. > > > + * > > > + * Configure the CMM unit with the CRTC provided configuration. > > > + * Currently enabling, disabling and programming of the 1-D LUT unit is > > > + * supported. > > > + */ > > > +int rcar_cmm_setup(struct platform_device *pdev, > > > + const struct rcar_cmm_config *config) > > > +{ > > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > > > + unsigned int i; > > > + > > > + if (config->lut.size > CMM_GAMMA_LUT_SIZE) > > > + return -EINVAL; > > > + > > > + /* > > > + * As cmm_setup is called by atomic commit tail helper, it might be > > > + * called before enabling the CRTC (which calls cmm_enable()). > > > + */ > > > + if (!rcmm->enabled) { > > > + if (!config->lut.enable) > > > + return 0; > > > + > > > + /* > > > + * Store the LUT table entries in the scratch buffer to be later > > > + * programmed at enable time. > > > + */ > > > + for (i = 0; i < config->lut.size; ++i) > > > + rcmm->lut.table[i] = config->lut.table[i]; > > > + > > > + rcmm->lut.size = config->lut.size; > > > + rcmm->lut.restore = true; > > > + > > > + return 0; > > > + } > > > + > > > + /* Stop LUT operations, if requested. */ > > > + if (rcmm->lut.running && !config->lut.enable) { > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > > > + rcmm->lut.running = 0; > > > + rcmm->lut.size = 0; > > > + > > > + return 0; > > > + } > > > + > > > + /* Enable LUT and program the new gamma table values. */ > > > + if (!rcmm->lut.running) { > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_EN); > > > + rcmm->lut.running = true; > > > + } > > > + > > > + rcar_cmm_lut_write(rcmm, config->lut.size, config->lut.table); > > > + rcmm->lut.size = config->lut.size; > > > + > > > + return 0; > > > +} > > > +EXPORT_SYMBOL_GPL(rcar_cmm_setup); > > > + > > > +/** > > > + * rcar_cmm_enable - enable the CMM unit > > > + * > > > + * @pdev: The platform device associated with the CMM instance > > > + * > > > + * Enable the CMM unit by enabling the parent clock and enabling the CMM > > > + * components, such as 1-D LUT, if requested. > > > + */ > > > +int rcar_cmm_enable(struct platform_device *pdev) > > > +{ > > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > > > + int ret; > > > + > > > + if (!rcmm) > > > + return -EPROBE_DEFER; > > > + > > > + ret = clk_prepare_enable(rcmm->clk); > > > + if (ret) > > > + return ret; > > > + > > > + /* Apply the LUT table values saved at cmm_setup time. */ > > > + if (rcmm->lut.restore) { > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_EN); > > > + rcar_cmm_lut_write(rcmm, rcmm->lut.size, rcmm->lut.table); > > > + > > > + rcmm->lut.restore = false; > > > + rcmm->lut.running = true; > > > + } > > > + > > > + rcmm->enabled = true; > > > + > > > + return 0; > > > +} > > > +EXPORT_SYMBOL_GPL(rcar_cmm_enable); > > > + > > > +/** > > > + * rcar_cmm_disable() - disable the CMM unit > > > + * > > > + * Disable the CMM unit by stopping the parent clock. > > > + * > > > + * @pdev: The platform device associated with the CMM instance > > > + */ > > > +void rcar_cmm_disable(struct platform_device *pdev) > > > +{ > > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > > > + > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > > > + > > > + clk_disable_unprepare(rcmm->clk); > > > + > > > + rcmm->lut.restore = false; > > > + rcmm->lut.running = false; > > > + rcmm->lut.size = 0; > > > + > > > + rcmm->enabled = false; > > > +} > > > +EXPORT_SYMBOL_GPL(rcar_cmm_disable); > > > + > > > +#ifdef CONFIG_PM_SLEEP > > > +static int rcar_cmm_pm_suspend(struct device *dev) > > > +{ > > > + struct rcar_cmm *rcmm = dev_get_drvdata(dev); > > > + unsigned int i; > > > + > > > + if (!(rcmm->lut.running || rcmm->lut.restore)) > > > + return 0; > > > + > > > + /* Save the LUT table entries in the scratch buffer table. */ > > > + for (i = 0; i < rcmm->lut.size; ++i) { > > > + int entry = rcar_cmm_read(rcmm, CM2_LUT_TBLA(i)); > > > + struct drm_color_lut *lut = &rcmm->lut.table[i]; > > > + > > > + lut->blue = entry & 0xff; > > > + lut->green = (entry >> 8) & 0xff; > > > + lut->red = (entry >> 16) & 0xff; > > > > Need to convert the values back to drm_color_lut scale here. I could > > not find a counterpart to drm_color_lut_extract(), though... > > How about storing the LUT in hardware format internally ? I wonder if we > should always update the cached copy, in which case rcar_cmm_lut_write() > could just write the LUT values from the cache. > Probably that's the easier, so we always write stuff already scaled down to the 8-bit precision the CMM supports. Thanks both j > > > + } > > > + > > > + rcmm->lut.restore = true; > > > + rcmm->lut.running = false; > > > + > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > > > + > > > + return 0; > > > +} > > > + > > > +static int rcar_cmm_pm_resume(struct device *dev) > > > +{ > > > + struct rcar_cmm *rcmm = dev_get_drvdata(dev); > > > + > > > + if (!rcmm->lut.restore) > > > + return 0; > > > + > > > + /* Program the LUT entries saved at suspend time. */ > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_EN); > > > + rcar_cmm_lut_write(rcmm, rcmm->lut.size, rcmm->lut.table); > > > + rcmm->lut.running = true; > > > + rcmm->lut.restore = false; > > > + > > > + return 0; > > > +} > > > +#endif > > > + > > > +static const struct dev_pm_ops rcar_cmm_pm_ops = { > > > + SET_SYSTEM_SLEEP_PM_OPS(rcar_cmm_pm_suspend, rcar_cmm_pm_resume) > > > +}; > > > + > > > +static int rcar_cmm_probe(struct platform_device *pdev) > > > +{ > > > + struct rcar_cmm *rcmm; > > > + struct resource *res; > > > + resource_size_t size; > > > + > > > + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL); > > > + if (!rcmm) > > > + return -ENOMEM; > > > + > > > + platform_set_drvdata(pdev, rcmm); > > > + > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > + size = resource_size(res); > > > + if (!devm_request_mem_region(&pdev->dev, res->start, size, > > > + dev_name(&pdev->dev))) { > > > + dev_err(&pdev->dev, > > > + "can't request region for resource %pR\n", res); > > > + return -EBUSY; > > > + } > > > + > > > + rcmm->base = devm_ioremap_nocache(&pdev->dev, res->start, size); > > > + if (IS_ERR(rcmm->base)) > > > + return PTR_ERR(rcmm->base); > > > + > > > + rcmm->clk = devm_clk_get(&pdev->dev, NULL); > > > + if (IS_ERR(rcmm->clk)) { > > > + dev_err(&pdev->dev, "Failed to get CMM clock"); > > > + return PTR_ERR(rcmm->clk); > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static const struct of_device_id rcar_cmm_of_table[] = { > > > + { .compatible = "renesas,rcar-gen3-cmm", }, > > > + { .compatible = "renesas,rcar-gen2-cmm", }, > > > + { }, > > > +}; > > > + > > > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table); > > > + > > > +static struct platform_driver rcar_cmm_platform_driver = { > > > + .probe = rcar_cmm_probe, > > > + .driver = { > > > + .name = "rcar-cmm", > > > + .pm = &rcar_cmm_pm_ops, > > > + .of_match_table = rcar_cmm_of_table, > > > + }, > > > +}; > > > + > > > +module_platform_driver(rcar_cmm_platform_driver); > > > + > > > +MODULE_AUTHOR("Jacopo Mondi "); > > > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver"); > > > +MODULE_LICENSE("GPL v2"); > > > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h > > > new file mode 100644 > > > index 000000000000..8744e72f32cd > > > --- /dev/null > > > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h > > > @@ -0,0 +1,38 @@ > > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > > +/* > > > + * rcar_cmm.h -- R-Car Display Unit Color Management Module > > > + * > > > + * Copyright (C) 2019 Jacopo Mondi > > > + */ > > > + > > > +#ifndef __RCAR_CMM_H__ > > > +#define __RCAR_CMM_H__ > > > + > > > +#define CMM_GAMMA_LUT_SIZE 256 > > > + > > > +struct platform_device; > > > +struct drm_color_lut; > > > + > > > +/** > > > + * struct rcar_cmm_config - CMM configuration > > > + * > > > + * @lut: 1D-LUT configuration > > > + * @lut.enable: 1D-LUT enable flag > > > + * @lut.table: 1D-LUT table entries. > > > + * @lut.size 1D-LUT number of entries. Max is 256. > > > + */ > > > +struct rcar_cmm_config { > > > + struct { > > > + bool enable; > > > + struct drm_color_lut *table; > > > + unsigned int size; > > > + } lut; > > > +}; > > > + > > > +int rcar_cmm_enable(struct platform_device *pdev); > > > +void rcar_cmm_disable(struct platform_device *pdev); > > > + > > > +int rcar_cmm_setup(struct platform_device *pdev, > > > + const struct rcar_cmm_config *config); > > > + > > > +#endif /* __RCAR_CMM_H__ */ > > -- > Regards, > > Laurent Pinchart --udwnqrrxkfgyy2n6 Content-Type: application/pgp-signature; name="signature.asc" -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEtcQ9SICaIIqPWDjAcjQGjxahVjwFAl1exlwACgkQcjQGjxah VjyKVw//QHMqG/emAzAF/E6YMjnXd93L6jGtIUDNQhdnlAs4lzSRf41TcDg1eQUZ bhvWfQWpp++LxGBVXPP3B+/8sGLtm0LFOjIdr3BbgK2zA+j2RSv2kCkUf5PrA6ed YsjtGVxYjFEY7aC8u2ra/khtVwnwwN8BUi2IEGVGDfk0OoqDzGsuYeIpkQnyayAc pPuVqqZSLpMRqdrQH7ZQToDtz9M9mp0KKLIR8tMZkkqVIRg/TGGSA4TWWmzjnAli RZAAByqDyrPYOnGri/h5pBUS9wUsj9Kvs1LQEqU291jVbIh2urHNwAModMXHuZCc 9qzeY3TT24xlM7CcQyaC1fOZhZaugOJmSH74XOmuTnGVObnYX0d49ArY86vVh7c8 y9iVNcRacB2r1is92W7maZGxg39qBWpHDPk2EVNislY6BwCg6grFEXszfa9njrq0 K40OK+sAfUrVOaSkaIUxIPbkVUA9VpZ43rp+bvOux3AYYfTREOdyU0Zl2sKwCISV ABKteiqG64/iniqTJLB3GY5PreXcxYoc+hWoK1yFBX0x/EiffnvFP8N8Q+vtrFz+ En5vHA+rZOdVOe6tFGJdmZNejRpbbZdkty71gh+Ia3P+xgWfMENEGwFukaEzU755 4/vOXUCYM9b/FXNNYqgDx1AGKmDNJF0gcdR8pLUuGmJJqFFGL00= =THG0 -----END PGP SIGNATURE----- --udwnqrrxkfgyy2n6--