Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964791AbVLQASm (ORCPT ); Fri, 16 Dec 2005 19:18:42 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964876AbVLQASm (ORCPT ); Fri, 16 Dec 2005 19:18:42 -0500 Received: from [139.30.44.16] ([139.30.44.16]:11857 "EHLO gockel.physik3.uni-rostock.de") by vger.kernel.org with ESMTP id S964791AbVLQASm (ORCPT ); Fri, 16 Dec 2005 19:18:42 -0500 Date: Sat, 17 Dec 2005 01:18:38 +0100 (CET) From: Tim Schmielau To: Vladimir Lazarenko cc: LKML Subject: Re: tulip on alpha ds10l 100MbpsFD problem In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1214 Lines: 29 On Fri, 16 Dec 2005, Vladimir Lazarenko wrote: > Hello, > > I'm trying to get this DS 10L going with Linux, and I hit the ceiling with the > onboard ethernet. > Whenever the device is in 10Mbps, and switch is in 10 Mbps, everything works > ok (half-duplex mode). Whenever I switch to 100Mbps, I'm not able to receive > packets. At all. Sending goes ok, i.e. I see DHCP requests on another server, > but nothing reaches the box when data is sent to it. > > Similar behaviour with both de4x5 and tulip drivers. Try to connect them to a different switch. I had the same problem with some XP1000s some years ago. It went away when I connected them to a different switch. Since then, the machines have been on four different switches, and only had the problem with one of them. Strangely it was an expensive managed switch that didn't work, while two el cheapo 8 port switches had no problems. Somewhere I read this was a hardware bug of the cards. Good luck! Tim - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/