Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
In-Reply-To: <20190824130329.68f310aa@xps13>
References: <1566280428-4159-1-git-send-email-masonccyang@mxic.com.tw> <20190824130329.68f310aa@xps13>
To:     "Miquel Raynal" <miquel.raynal@bootlin.com>
Cc:     bbrezillon@kernel.org, computersforpeace@gmail.com,
        dwmw2@infradead.org, frieder.schrempf@kontron.de,
        juliensu@mxic.com.tw, kstewart@linuxfoundation.org,
        linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
        marek.vasut@gmail.com, richard@nod.at, tglx@linutronix.de,
        vigneshr@ti.com
Subject: Re: [PATCH] Add support for Macronix NAND randomizer
MIME-Version: 1.0
Message-ID: <OF22C5A579.E2E7676F-ON48258465.002F7F69-48258465.00322849@mxic.com.tw>
From:   masonccyang@mxic.com.tw
Date:   Thu, 29 Aug 2019 17:07:51 +0800
Content-Type: text/plain; charset="US-ASCII"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk


Hi Miquel, 


> > 
> > If subpage write not available with hardware ECC, for example,
> > NAND chip options NAND_NO_SUBPAGE_WRITE be set in driver and
> > randomizer function is recommended for high-reliability.
> > Driver checks byte 167 of Vendor Blocks in ONFI parameter page table
> > to see if this high-reliability function is supported.
> > 
> 
> You did not flagged this patch as a v2 and forgot about the changelog.
> You did not listen to our comments in the last version neither. I was
> open to a solution with a specific DT property for warned users but I
> don't see it coming.
> 

Based on your comments by specific DT property for randomizer support.
to add a new property in children nodes:

i.e,.

nand: nand-controller@43c30000 {

                nand@0 {
                        reg = <0>;
                        nand-reliability = "randomizer";
                };
};


file of nand_macronix.c will patch to:

static void macronix_nand_onfi_init(struct nand_chip *chip)
{
        struct nand_parameters *p = &chip->parameters;
        struct device_node *dn = nand_get_flash_node(chip);
        const char *pm;
        int rand_enable = 0;

        ret = of_property_read_string(dn, "nand-reliability", &pm);
        if (!ret) {
                if (!strcasecmp(pm, "randomizer"));
                        rand_enable = 1;
        }
 
        mxic = (struct nand_onfi_vendor_macronix *)p->onfi->vendor;
        if (rand_enable &&
            mxic->reliability_func & MACRONIX_RANDOMIZER_BIT) {
                if (p->supports_set_get_features) {
                        bitmap_set(p->set_feature_list,
                                   ONFI_FEATURE_ADDR_MXIC_RANDOMIZER, 1);
                        bitmap_set(p->get_feature_list,
                                   ONFI_FEATURE_ADDR_MXIC_RANDOMIZER, 1);
                        /* set-up chip options with NAND_NO_SUBPAGE_WRITE 
*/
                        chip->options |= NAND_NO_SUBPAGE_WRITE;
                        macronix_nand_randomizer_check_enable(chip);
                }
        }
 
} 

something like this,

is it OK ?

thanks & best regards,
Mason


CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================


============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================