Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Fri, 30 Aug 2019 09:45:20 -0700
From:   Bjorn Andersson <bjorn.andersson@linaro.org>
To:     Stephen Boyd <swboyd@chromium.org>
Cc:     Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>, robh@kernel.org,
        andy.gross@linaro.org, shawn.guo@linaro.org,
        gregkh@linuxfoundation.org, mark.rutland@arm.com, kishon@ti.com,
        jackp@codeaurora.org, devicetree@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        khasim.mohammed@linaro.org
Subject: Re: [PATCH v4 3/4] dt-bindings: Add Qualcomm USB SuperSpeed PHY
 bindings
Message-ID: <20190830164520.GK26807@tuxbook-pro>
References: <20190207111734.24171-1-jorge.ramirez-ortiz@linaro.org>
 <20190207111734.24171-4-jorge.ramirez-ortiz@linaro.org>
 <20190223165218.GB572@tuxbook-pro>
 <6dc0957d-5806-7643-4454-966015865d38@linaro.org>
 <5d694878.1c69fb81.5f13b.ec4f@mx.google.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <5d694878.1c69fb81.5f13b.ec4f@mx.google.com>
User-Agent: Mutt/1.12.1 (2019-06-15)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri 30 Aug 09:01 PDT 2019, Stephen Boyd wrote:

> Quoting Jorge Ramirez (2019-08-29 00:03:48)
> > On 2/23/19 17:52, Bjorn Andersson wrote:
> > > On Thu 07 Feb 03:17 PST 2019, Jorge Ramirez-Ortiz wrote:
> > >> +
> > >> +Required child nodes:
> > >> +
> > >> +- usb connector node as defined in bindings/connector/usb-connector.txt
> > >> +  containing the property vbus-supply.
> > >> +
> > >> +Example:
> > >> +
> > >> +usb3_phy: usb3-phy@78000 {
> > >> +    compatible = "qcom,snps-usb-ssphy";
> > >> +    reg = <0x78000 0x400>;
> > >> +    #phy-cells = <0>;
> > >> +    clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
> > >> +             <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
> > >> +             <&gcc GCC_USB3_PHY_PIPE_CLK>;
> > >> +    clock-names = "ref", "phy", "pipe";
> > >> +    resets = <&gcc GCC_USB3_PHY_BCR>,
> > >> +             <&gcc GCC_USB3PHY_PHY_BCR>;
> > >> +    reset-names = "com", "phy";
> > >> +    vdd-supply = <&vreg_l3_1p05>;
> > >> +    vdda1p8-supply = <&vreg_l5_1p8>;
> > >> +    usb3_c_connector: usb3-c-connector {
> 
> Node name should be 'connector', not usb3-c-connector.
> 

It probably has to be usb-c-connector, because we have a
micro-usb-connector on the same board.

> > > 
> > > The USB-C connector is attached both to the HS and SS PHYs, so I think
> > > you should represent this external to this node and use of_graph to
> > > query it.
> > 
> > but AFAICS we wont be able to retrieve the vbux-supply from an external
> > node (that interface does not exist).
> > 
> > rob, do you have a suggestion?
> 
> Shouldn't the vbus supply be in the phy? Or is this a situation where
> the phy itself doesn't have the vbus supply going to it because the PMIC
> gets in the way and handles the vbus for the connector by having the SoC
> communicate with the PMIC about when to turn the vbus on and off, etc?
> 

That's correct, the VBUS comes out of the PMIC and goes directly to the
connector.

The additional complicating factor here is that the connector is wired
to a USB2 phy as well, so we need to wire up detection and vbus control
to both of them - but I think this will be fine, if we can only figure
out a sane way of getting hold of the vbus-supply.

Regards,
Bjorn