Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Lars Poeschel <poeschel@lemonage.de>
To:     Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        "GitAuthor: Lars Poeschel" <poeschel@lemonage.de>,
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list)
Cc:     Johan Hovold <johan@kernel.org>
Subject: [PATCH v7 2/7] nfc: pn532_uart: Add NXP PN532 to devicetree docs
Date:   Tue, 10 Sep 2019 11:32:53 +0200
Message-Id: <20190910093256.1920-1-poeschel@lemonage.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add a simple binding doc for the pn532.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
Changes in v6:
- Rebased the patch series on v5.3-rc5
- Picked up Rob's Reviewed-By

Changes in v4:
- Add documentation about reg property in case of i2c

Changes in v3:
- seperate binding doc instead of entry in trivial-devices.txt

 .../devicetree/bindings/nfc/pn532.txt         | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nfc/pn532.txt

diff --git a/Documentation/devicetree/bindings/nfc/pn532.txt b/Documentation/devicetree/bindings/nfc/pn532.txt
new file mode 100644
index 000000000000..d5aaa588073d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nfc/pn532.txt
@@ -0,0 +1,33 @@
+NXP PN532 NFC Chip
+
+Required properties:
+- compatible: Should be
+    - "nxp,pn532" Place a node with this inside the devicetree node of the bus
+                  where the NFC chip is connected to.
+                  Currently the kernel has phy bindings for uart and i2c.
+    - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
+    - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
+
+Required properties if connected on i2c:
+- reg: for the i2c bus address. This is fixed at 0x48 for the PN532.
+
+Example uart:
+
+uart4: serial@49042000 {
+        compatible = "ti,omap3-uart";
+
+        pn532: nfc {
+                compatible = "nxp,pn532";
+        };
+};
+
+Example i2c:
+
+i2c1: i2c@0 {
+        compatible = "ti,omap3-i2c";
+
+        pn532: nfc {
+                compatible = "nxp,pn532";
+                reg = <0x48>;
+        };
+};
-- 
2.23.0