Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <1568128624-2902-1-git-send-email-sheetal.tigadoli@broadcom.com>
In-Reply-To: <1568128624-2902-1-git-send-email-sheetal.tigadoli@broadcom.com>
From:   Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date:   Thu, 12 Sep 2019 22:31:21 +0100
Message-ID: <CAKv+Gu_AyPWEbgf1e85LvFg-oB0Bezf2gW1YukZRLN+QC4ybWg@mail.gmail.com>
Subject: Re: [PATCH] firmware: broadcom: add OP-TEE based BNXT f/w manager
To:     Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Cc:     =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= <zajec5@gmail.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Michal Simek <michal.simek@xilinx.com>,
        Rajan Vaja <rajan.vaja@xilinx.com>,
        Scott Branden <scott.branden@broadcom.com>,
        Ray Jui <ray.jui@broadcom.com>,
        Vikram Prakash <vikram.prakash@broadcom.com>,
        tee-dev@lists.linaro.org, bcm-kernel-feedback-list@broadcom.com,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Vikas Gupta <vikas.gupta@broadcom.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

(+ Jens)

Please make sure you have the right people on cc. Instead of Ingo,
Thomas or linux-mips (?), you might have cc'ed the OP-TEE maintainer
yourself?


On Tue, 10 Sep 2019 at 16:17, Sheetal Tigadoli
<sheetal.tigadoli@broadcom.com> wrote:
>
> From: Vikas Gupta <vikas.gupta@broadcom.com>
>
> This driver registers on TEE bus to interact with OP-TEE based
> BNXT firmware management modules
>
> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
> ---
>  drivers/firmware/broadcom/Kconfig             |   8 +
>  drivers/firmware/broadcom/Makefile            |   1 +
>  drivers/firmware/broadcom/tee_bnxt_fw.c       | 447 ++++++++++++++++++++++++++
>  include/linux/firmware/broadcom/tee_bnxt_fw.h |  17 +
>  4 files changed, 473 insertions(+)
>  create mode 100644 drivers/firmware/broadcom/tee_bnxt_fw.c
>  create mode 100644 include/linux/firmware/broadcom/tee_bnxt_fw.h
>
> diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig
> index 6468082..a846a21 100644
> --- a/drivers/firmware/broadcom/Kconfig
> +++ b/drivers/firmware/broadcom/Kconfig
> @@ -22,3 +22,11 @@ config BCM47XX_SPROM
>           In case of SoC devices SPROM content is stored on a flash used by
>           bootloader firmware CFE. This driver provides method to ssb and bcma
>           drivers to read SPROM on SoC.
> +
> +config TEE_BNXT_FW
> +       bool "Broadcom BNXT firmware manager"
> +       depends on ARCH_BCM_IPROC && OPTEE
> +       default ARCH_BCM_IPROC
> +       help
> +         This module help to manage firmware on Broadcom BNXT device. The module
> +         registers on tee bus and invoke calls to manage firmware on BNXT device.
> diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile
> index 72c7fdc..17c5061 100644
> --- a/drivers/firmware/broadcom/Makefile
> +++ b/drivers/firmware/broadcom/Makefile
> @@ -1,3 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_BCM47XX_NVRAM)            += bcm47xx_nvram.o
>  obj-$(CONFIG_BCM47XX_SPROM)            += bcm47xx_sprom.o
> +obj-$(CONFIG_TEE_BNXT_FW)              += tee_bnxt_fw.o
> diff --git a/drivers/firmware/broadcom/tee_bnxt_fw.c b/drivers/firmware/broadcom/tee_bnxt_fw.c
> new file mode 100644
> index 00000000..89a48fd
> --- /dev/null
> +++ b/drivers/firmware/broadcom/tee_bnxt_fw.c
> @@ -0,0 +1,447 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2019 Broadcom.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/tee_drv.h>
> +#include <linux/uuid.h>
> +
> +#include <linux/firmware/broadcom/tee_bnxt_fw.h>
> +
> +#define DRIVER_NAME    "tee-bnxt-fw"
> +
> +#define MAX_SHM_MEM_SZ SZ_4M
> +
> +#define MAX_TEE_PARAM_ARRY_MEMB                4
> +
> +enum ta_cmd {
> +/*
> + * TA_CMD_BNXT_FASTBOOT - boot bnxt device by copying f/w into sram
> + *
> + * param[0] unused
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_ITEM_NOT_FOUND - Corrupt f/w image found on memory
> + */
> +       TA_CMD_BNXT_FASTBOOT = 0,
> +
> +/*
> + * TA_CMD_BNXT_HEALTH_STATUS - to check health of bnxt device
> + *
> + * param[0] (out value) - value.a: health status
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + */
> +       TA_CMD_BNXT_HEALTH_STATUS,
> +
> +/*
> + * TA_CMD_BNXT_HANDSHAKE - to check bnxt device is booted
> + *
> + * param[0] (in value)  - value.a: max timeout value
> + * param[0] (out value) - value.a: boot status
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + */
> +       TA_CMD_BNXT_HANDSHAKE,
> +
> +/*
> + * TA_CMD_BNXT_COPY_COREDUMP - copy the core dump into shm
> + *
> + * param[0] (in value) - value.a: offset at which data to be copied from
> + *                      value.b: size of the data
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + * TEE_ERROR_ITEM_NOT_FOUND - Corrupt core dump
> + */
> +       TA_CMD_BNXT_COPY_COREDUMP,
> +
> +/*
> + * TA_CMD_BNXT_FW_UPGRADE - upgrade the bnxt firmware
> + *
> + * param[0] (in value) - value.a: size of the f/w image
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + */
> +       TA_CMD_BNXT_FW_UPGRADE,
> +};
> +
> +/**
> + * struct tee_bnxt_fw_private - OP-TEE bnxt private data
> + * @dev:               OP-TEE based bnxt device.
> + * @ctx:               OP-TEE context handler.
> + * @session_id:                TA session identifier.
> + */
> +struct tee_bnxt_fw_private {
> +       struct device *dev;
> +       struct tee_context *ctx;
> +       u32 session_id;
> +       struct tee_shm *fw_shm_pool;
> +};
> +
> +static struct tee_bnxt_fw_private pvt_data;
> +
> +static inline void prepare_args(int cmd,
> +                               struct tee_ioctl_invoke_arg *inv_arg,
> +                               struct tee_param *param)
> +{
> +       memset(inv_arg, 0, sizeof(*inv_arg));
> +       memset(param, 0, (MAX_TEE_PARAM_ARRY_MEMB * sizeof(*param)));
> +
> +       inv_arg->func = cmd;
> +       inv_arg->session = pvt_data.session_id;
> +       inv_arg->num_params = MAX_TEE_PARAM_ARRY_MEMB;
> +
> +       /* Fill invoke cmd params */
> +       switch (cmd) {
> +       case TA_CMD_BNXT_HEALTH_STATUS:
> +               param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> +               break;
> +       case TA_CMD_BNXT_HANDSHAKE:
> +               param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
> +               break;
> +       case TA_CMD_BNXT_COPY_COREDUMP:
> +       case TA_CMD_BNXT_FW_UPGRADE:
> +               param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> +               param[0].u.memref.shm = pvt_data.fw_shm_pool;
> +               param[0].u.memref.size = MAX_SHM_MEM_SZ;
> +               param[0].u.memref.shm_offs = 0;
> +               param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
> +               break;
> +       case TA_CMD_BNXT_FASTBOOT:
> +       default:
> +               /* Nothing to do */
> +               break;
> +       }
> +}
> +
> +/**
> + * tee_bnxt_fw_load() - Load the bnxt firmware
> + *                 Uses an OP-TEE call to start a secure
> + *                 boot process.
> + * Returns 0 on success, negative errno otherwise.
> + */
> +int tee_bnxt_fw_load(void)
> +{
> +       int ret = 0;
> +       struct tee_ioctl_invoke_arg inv_arg;
> +       struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> +
> +       if (!pvt_data.ctx)
> +               return -ENODEV;
> +
> +       prepare_args(TA_CMD_BNXT_FASTBOOT, &inv_arg, param);
> +
> +       ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> +       if ((ret < 0) || (inv_arg.ret != 0)) {
> +               dev_err(pvt_data.dev, "TA_CMD_BNXT_LOAD invoke err: %x\n",
> +                       (ret < 0) ? ret : inv_arg.ret);
> +               return -EINVAL;
> +       }
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(tee_bnxt_fw_load);
> +
> +/**
> + * tee_bnxt_health_status() - Get the health status
> + *                 Uses an OP-TEE call to get health
> + *                 status of bnxt device.
> + * @status:        status is returned on this pointer
> + * Returns 0 on success, negative errno otherwise.
> + */
> +int tee_bnxt_health_status(u32 *status)
> +{
> +       int ret = 0;
> +       struct tee_ioctl_invoke_arg inv_arg;
> +       struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> +
> +       if (!pvt_data.ctx)
> +               return -ENODEV;
> +
> +       prepare_args(TA_CMD_BNXT_HEALTH_STATUS, &inv_arg, param);
> +
> +       ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> +       if ((ret < 0) || (inv_arg.ret != 0)) {
> +               dev_err(pvt_data.dev, "TA_CMD_BNXT_HEALTH_STATUS invoke err: %x\n",
> +                       (ret < 0) ? ret : inv_arg.ret);
> +               return -EINVAL;
> +       }
> +
> +       *status = param[0].u.value.a;
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(tee_bnxt_health_status);
> +
> +/**
> + * tee_bnxt_handshake() - Get the handshake status
> + *                 Uses an OP-TEE call to get handshake
> + *                 status after bnxt device`s boot process.
> + * @timeout:       max timeout to wait for handshake
> + * @status:        status is populated
> + * Returns 0 on success, negative errno otherwise.
> + */
> +int tee_bnxt_handshake(u32 timeout, u32 *status)
> +{
> +       int ret = 0;
> +       struct tee_ioctl_invoke_arg inv_arg;
> +       struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> +
> +       if (!pvt_data.ctx)
> +               return -ENODEV;
> +
> +       prepare_args(TA_CMD_BNXT_HANDSHAKE, &inv_arg, param);
> +
> +       /* Fill additional invoke cmd params */
> +       param[0].u.value.a = timeout;
> +
> +       ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> +       if ((ret < 0) || (inv_arg.ret != 0)) {
> +               dev_err(pvt_data.dev, "TA_CMD_BNXT_HANDSHAKE invoke err: %x\n",
> +                       (ret < 0) ? ret : inv_arg.ret);
> +               return -EINVAL;
> +       }
> +
> +       *status = param[0].u.value.a;
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(tee_bnxt_handshake);
> +
> +/**
> + * tee_bnxt_copy_coredump() - Copy coredump from the allocated memory
> + *                         Uses an OP-TEE call to copy coredump
> + * @buf:       desintation buffer where core dump is copied into
> + * @offset:    offset from the base address of core dump area
> + * @size:      size of the dump
> + *
> + * Returns 0 on success, negative errno otherwise.
> + */
> +int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size)
> +{
> +       struct tee_ioctl_invoke_arg inv_arg;
> +       struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> +       void *core_data;
> +       u32 rbytes = size;
> +       u32 nbytes = 0;
> +       int ret = 0;
> +
> +       if (!pvt_data.ctx)
> +               return -ENODEV;
> +
> +       if (!buf)
> +               return -EINVAL;
> +
> +       prepare_args(TA_CMD_BNXT_COPY_COREDUMP, &inv_arg, param);
> +
> +       while (rbytes)  {
> +               nbytes = rbytes;
> +
> +               nbytes = min_t(u32, rbytes, param[0].u.memref.size);
> +
> +               /* Fill additional invoke cmd params */
> +               param[1].u.value.a = offset;
> +               param[1].u.value.b = nbytes;
> +
> +               ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> +               if ((ret < 0) || (inv_arg.ret != 0)) {
> +                       dev_err(pvt_data.dev,
> +                               "TA_CMD_BNXT_COPY_COREDUMP invoke err: %x\n",
> +                               (ret < 0) ? ret : inv_arg.ret);
> +                       return -EINVAL;
> +               }
> +
> +               core_data = tee_shm_get_va(pvt_data.fw_shm_pool, 0);
> +               if (IS_ERR(core_data)) {
> +                       dev_err(pvt_data.dev, "tee_shm_get_va failed\n");
> +                       return PTR_ERR(core_data);
> +               }
> +
> +               memcpy(buf, core_data, nbytes);
> +
> +               rbytes -= nbytes;
> +               buf += nbytes;
> +               offset += nbytes;
> +       }
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(tee_bnxt_copy_coredump);
> +
> +/**
> + * bnxt_fw_upgrade() - Upgrade the bnxt firmware and configuration of
> + *                    bnxt device into the flash device.
> + *                    Uses an OP-TEE call to upgrade firmware.
> + * @buf:       source buffer of firmware image
> + * @size:      size of the image
> + *
> + * Returns 0 on success, negative errno otherwise.
> + */
> +int bnxt_fw_upgrade(void *buf, u32 size)
> +{
> +       struct tee_ioctl_invoke_arg inv_arg;
> +       struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> +       void *fw_image_dst;
> +       int ret = 0;
> +
> +       if (!pvt_data.ctx)
> +               return -ENODEV;
> +
> +       /* we do not expect firmware size more than allocated tee shm size */
> +       if (!buf || size > MAX_SHM_MEM_SZ)
> +               return -EINVAL;
> +
> +       prepare_args(TA_CMD_BNXT_FW_UPGRADE, &inv_arg, param);
> +
> +       /* Fill additional invoke cmd params */
> +       param[1].u.value.a = size;
> +
> +       fw_image_dst = tee_shm_get_va(pvt_data.fw_shm_pool, 0);
> +       if (IS_ERR(fw_image_dst)) {
> +               dev_err(pvt_data.dev, "tee_shm_get_va failed\n");
> +               return PTR_ERR(fw_image_dst);
> +       }
> +
> +       memcpy(fw_image_dst, buf, size);
> +
> +       ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> +       if ((ret < 0) || (inv_arg.ret != 0)) {
> +               dev_err(pvt_data.dev, "TA_CMD_BNXT_FW_UPGRADE invoke err: %x\n",
> +                       (ret < 0) ? ret : inv_arg.ret);
> +               return -EINVAL;
> +       }
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(bnxt_fw_upgrade);
> +
> +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> +       if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> +               return 1;
> +       else
> +               return 0;
> +}
> +
> +static int tee_bnxt_fw_probe(struct device *dev)
> +{
> +       struct tee_client_device *bnxt_device = to_tee_client_device(dev);
> +       int ret, err = -ENODEV;
> +       struct tee_ioctl_open_session_arg sess_arg;
> +       struct tee_shm *fw_shm_pool;
> +
> +       memset(&sess_arg, 0, sizeof(sess_arg));
> +
> +       /* Open context with TEE driver */
> +       pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL,
> +                                              NULL);
> +       if (IS_ERR(pvt_data.ctx))
> +               return -ENODEV;
> +
> +       /* Open session with Bnxt load Trusted App */
> +       memcpy(sess_arg.uuid, bnxt_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
> +       sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> +       sess_arg.num_params = 0;
> +
> +       ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL);
> +       if ((ret < 0) || (sess_arg.ret != 0)) {
> +               dev_err(dev, "tee_client_open_session failed, err: %x\n",
> +                       sess_arg.ret);
> +               err = -EINVAL;
> +               goto out_ctx;
> +       }
> +       pvt_data.session_id = sess_arg.session;
> +
> +       pvt_data.dev = dev;
> +
> +       fw_shm_pool = tee_shm_alloc(pvt_data.ctx, MAX_SHM_MEM_SZ,
> +                                   TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> +       if (IS_ERR(fw_shm_pool)) {
> +               tee_client_close_context(pvt_data.ctx);
> +               dev_err(pvt_data.dev, "tee_shm_alloc failed\n");
> +               err = PTR_ERR(fw_shm_pool);
> +               goto out_sess;
> +       }
> +
> +       pvt_data.fw_shm_pool = fw_shm_pool;
> +
> +       return 0;
> +
> +out_sess:
> +       tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
> +out_ctx:
> +       tee_client_close_context(pvt_data.ctx);
> +
> +       return err;
> +}
> +
> +static int tee_bnxt_fw_remove(struct device *dev)
> +{
> +       tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
> +       tee_client_close_context(pvt_data.ctx);
> +       pvt_data.ctx = NULL;
> +
> +       return 0;
> +}
> +
> +static const struct tee_client_device_id tee_bnxt_fw_id_table[] = {
> +       {UUID_INIT(0x6272636D, 0x2019, 0x0716,
> +                   0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49)},
> +       {}
> +};
> +
> +MODULE_DEVICE_TABLE(tee, tee_bnxt_fw_id_table);
> +
> +static struct tee_client_driver tee_bnxt_fw_driver = {
> +       .id_table       = tee_bnxt_fw_id_table,
> +       .driver         = {
> +               .name           = DRIVER_NAME,
> +               .bus            = &tee_bus_type,
> +               .probe          = tee_bnxt_fw_probe,
> +               .remove         = tee_bnxt_fw_remove,
> +       },
> +};
> +
> +static int __init tee_bnxt_fw_mod_init(void)
> +{
> +       return driver_register(&tee_bnxt_fw_driver.driver);
> +}
> +
> +static void __exit tee_bnxt_fw_mod_exit(void)
> +{
> +       driver_unregister(&tee_bnxt_fw_driver.driver);
> +}
> +
> +module_init(tee_bnxt_fw_mod_init);
> +module_exit(tee_bnxt_fw_mod_exit);
> +
> +MODULE_AUTHOR("Broadcom");
> +MODULE_DESCRIPTION("Broadcom bnxt firmware manager");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/firmware/broadcom/tee_bnxt_fw.h b/include/linux/firmware/broadcom/tee_bnxt_fw.h
> new file mode 100644
> index 00000000..d3b7206
> --- /dev/null
> +++ b/include/linux/firmware/broadcom/tee_bnxt_fw.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: BSD-2-Clause */
> +/*
> + * Copyright 2019 Broadcom.
> + */
> +
> +#ifndef _BROADCOM_TEE_BNXT_FW_H
> +#define _BROADCOM_TEE_BNXT_FW_H
> +
> +#include <linux/types.h>
> +
> +int tee_bnxt_fw_load(void);
> +int tee_bnxt_health_status(u32 *status);
> +int tee_bnxt_handshake(u32 timeout, u32 *status);
> +int tee_bnxt_fw_update(void *buf, u32 size);
> +int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size);
> +
> +#endif /* _BROADCOM_TEE_BNXT_FW_H */
> --
> 1.9.1
>