Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <55f2fb85-9d4d-f78d-e6dd-70b09d7667e4@infradead.org>
In-Reply-To: <55f2fb85-9d4d-f78d-e6dd-70b09d7667e4@infradead.org>
From:   Jon Mason <jdmason@kudzu.us>
Date:   Mon, 23 Sep 2019 15:12:30 -0700
Message-ID: <CAPoiz9zWo+LuzWG29kSYCrs9FdwvzDycWBEmg_GHL3W5c3QRuQ@mail.gmail.com>
Subject: Re: [PATCH] NTB: fix IDT Kconfig typos/spellos
To:     Randy Dunlap <rdunlap@infradead.org>
Cc:     LKML <linux-kernel@vger.kernel.org>,
        linux-ntb <linux-ntb@googlegroups.com>,
        Dave Jiang <dave.jiang@intel.com>,
        Allen Hubbe <allenbh@gmail.com>,
        Serge Semin <fancer.lancer@gmail.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, Sep 18, 2019 at 1:58 PM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> From: Randy Dunlap <rdunlap@infradead.org>
>
> Fix typos in drivers/ntb/hw/idt/Kconfig.
> Use consistent spelling and capitalization.
>
> Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jon Mason <jdmason@kudzu.us>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: Allen Hubbe <allenbh@gmail.com>
> Cc: Serge Semin <fancer.lancer@gmail.com>
> Cc: linux-ntb@googlegroups.com

Pulled into the ntb branch.

Thanks,
Jon

> ---
>  drivers/ntb/hw/idt/Kconfig |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> --- lnx-53.orig/drivers/ntb/hw/idt/Kconfig
> +++ lnx-53/drivers/ntb/hw/idt/Kconfig
> @@ -4,11 +4,11 @@ config NTB_IDT
>         depends on PCI
>         select HWMON
>         help
> -        This driver supports NTB of cappable IDT PCIe-switches.
> +        This driver supports NTB of capable IDT PCIe-switches.
>
>          Some of the pre-initializations must be made before IDT PCIe-switch
> -        exposes it NT-functions correctly. It should be done by either proper
> -        initialisation of EEPROM connected to master smbus of the switch or
> +        exposes its NT-functions correctly. It should be done by either proper
> +        initialization of EEPROM connected to master SMbus of the switch or
>          by BIOS using slave-SMBus interface changing corresponding registers
>          value. Evidently it must be done before PCI bus enumeration is
>          finished in Linux kernel.
>
>