Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Jerome Brunet <jbrunet@baylibre.com>
To:     Neil Armstrong <narmstrong@baylibre.com>
Cc:     Jerome Brunet <jbrunet@baylibre.com>,
        Kevin Hilman <khilman@baylibre.com>,
        linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH 0/7] clk: meson: axg-audio: add sm1 support
Date:   Tue, 24 Sep 2019 17:33:49 +0200
Message-Id: <20190924153356.24103-1-jbrunet@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The purpose of this patchset is to add the sm1 support to the amlogic audio
clock controller. The line count is lot higher than what I hoped for. Even
if extremely similar, there is a shift in the register address on the sm1
which makes a bit of a mess.

I could have patched the address on the fly if running on sm1 but the end
result did not save much lines and would have been a pain to maintain and
scale in the future

Instead I choose to re-arrange the driver to share the macros and declare
separate clocks for the clock which have changed.

Jerome Brunet (7):
  dt-bindings: clk: axg-audio: add sm1 bindings
  dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
  clk: meson: axg-audio: remove useless defines
  clk: meson: axg-audio: fix regmap last register
  clk: meson: axg-audio: prepare sm1 addition
  clk: meson: axg-audio: provide clk top signal name
  clk: meson: axg_audio: add sm1 support

 .../bindings/clock/amlogic,axg-audio-clkc.txt |    3 +-
 drivers/clk/meson/axg-audio.c                 | 2021 +++++++++++------
 drivers/clk/meson/axg-audio.h                 |   21 +-
 include/dt-bindings/clock/axg-audio-clkc.h    |   10 +
 .../reset/amlogic,meson-g12a-audio-reset.h    |   15 +
 5 files changed, 1373 insertions(+), 697 deletions(-)

-- 
2.21.0