Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Leo Li <leoyang.li@nxp.com>
To:     Biwen Li <biwen.li@nxp.com>,
        "shawnguo@kernel.org" <shawnguo@kernel.org>,
        "robh+dt@kernel.org" <robh+dt@kernel.org>,
        "mark.rutland@arm.com" <mark.rutland@arm.com>,
        Ran Wang <ran.wang_1@nxp.com>
CC:     "linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
        "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: RE: [v3,3/3] Documentation: dt: binding: fsl: Add
 'fsl,ippdexpcr-alt-addr' property
Thread-Topic: [v3,3/3] Documentation: dt: binding: fsl: Add
 'fsl,ippdexpcr-alt-addr' property
Thread-Index: AQHVcoOnKERg3NBKWEeinvrVMNtD66c6+UIwgADABICAAADF0IAABAEAgAAAioCAAAQ4AIAAADyw
Date:   Wed, 25 Sep 2019 03:48:20 +0000
Message-ID: <AM0PR04MB6676B8A6F7C7C3BC822B45B28F870@AM0PR04MB6676.eurprd04.prod.outlook.com>
References: <20190924024548.4356-1-biwen.li@nxp.com>
 <20190924024548.4356-3-biwen.li@nxp.com>
 <AM0PR04MB667690EE76D327D0FC09F7818F840@AM0PR04MB6676.eurprd04.prod.outlook.com>
 <DB7PR04MB449034C4BBAA89685A2130F78F870@DB7PR04MB4490.eurprd04.prod.outlook.com>
 <AM0PR04MB66762594DDFC6E5B00BD103C8F870@AM0PR04MB6676.eurprd04.prod.outlook.com>
 <DB7PR04MB4490FECDC76507AADC35948E8F870@DB7PR04MB4490.eurprd04.prod.outlook.com>
 <AM0PR04MB6676BD24B814C3D1D67CF9F88F870@AM0PR04MB6676.eurprd04.prod.outlook.com>
 <DB7PR04MB4490EAE9591B5AE7112C9D188F870@DB7PR04MB4490.eurprd04.prod.outlook.com>
In-Reply-To: <DB7PR04MB4490EAE9591B5AE7112C9D188F870@DB7PR04MB4490.eurprd04.prod.outlook.com>
Accept-Language: en-US
Content-Language: en-US
received-spf: None (protection.outlook.com: nxp.com does not designate
 permitted sender hosts)
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-MS-Exchange-CrossTenant-Network-Message-Id: 69fcba0e-bbdc-4e58-9ec4-08d7416b34fb
X-MS-Exchange-CrossTenant-originalarrivaltime: 25 Sep 2019 03:48:20.1486
 (UTC)
X-MS-Exchange-CrossTenant-fromentityheader: Hosted
X-MS-Exchange-CrossTenant-id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635
X-MS-Exchange-CrossTenant-mailboxtype: HOSTED
X-MS-Exchange-CrossTenant-userprincipalname: uzbqAqI1a9Onnap4H+0cUuoYzidRYhxmPJ/jKJoCqA1R74gGp0DJ6C9qet6wYEmgxmLLqQak/Edy5MZCcOzKOA==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM0PR04MB6115
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org


> -----Original Message-----
> From: Biwen Li
> Sent: Tuesday, September 24, 2019 10:47 PM
> To: Leo Li <leoyang.li@nxp.com>; shawnguo@kernel.org;
> robh+dt@kernel.org; mark.rutland@arm.com; Ran Wang
> <ran.wang_1@nxp.com>
> Cc: linuxppc-dev@lists.ozlabs.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: RE: [v3,3/3] Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr=
-alt-
> addr' property
>=20
> > > > > > >
> > > > > > > The 'fsl,ippdexpcr-alt-addr' property is used to handle an
> > > > > > > errata
> > > > > > > A-008646 on LS1021A
> > > > > > >
> > > > > > > Signed-off-by: Biwen Li <biwen.li@nxp.com>
> > > > > > > ---
> > > > > > > Change in v3:
> > > > > > > 	- rename property name
> > > > > > > 	  fsl,rcpm-scfg -> fsl,ippdexpcr-alt-addr
> > > > > > >
> > > > > > > Change in v2:
> > > > > > > 	- update desc of the property 'fsl,rcpm-scfg'
> > > > > > >
> > > > > > >  Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 14
> > > > > > > ++++++++++++++
> > > > > > >  1 file changed, 14 insertions(+)
> > > > > > >
> > > > > > > diff --git
> > > > > > > a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > > > > > b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > > > > > index 5a33619d881d..157dcf6da17c 100644
> > > > > > > --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > > > > > +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > > > > > @@ -34,6 +34,11 @@ Chassis Version		Example
> Chips
> > > > > > >  Optional properties:
> > > > > > >   - little-endian : RCPM register block is Little Endian.
> > > > > > > Without it
> > RCPM
> > > > > > >     will be Big Endian (default case).
> > > > > > > + - fsl,ippdexpcr-alt-addr : Must add the property for SoC
> > > > > > > + LS1021A,
> > > > > >
> > > > > > You probably should mention this is related to a hardware
> > > > > > issue on LS1021a and only needed on LS1021a.
> > > > > Okay, got it, thanks, I will add this in v4.
> > > > > >
> > > > > > > +   Must include n + 1 entries (n =3D #fsl,rcpm-wakeup-cells,=
 such as:
> > > > > > > +   #fsl,rcpm-wakeup-cells equal to 2, then must include 2 +
> > > > > > > + 1
> > entries).
> > > > > >
> > > > > > #fsl,rcpm-wakeup-cells is the number of IPPDEXPCR registers on
> > > > > > an
> > SoC.
> > > > > > However you are defining an offset to scfg registers here.
> > > > > > Why these two are related?  The length here should actually be
> > > > > > related to the #address-cells of the soc/.  But since this is
> > > > > > only needed for LS1021, you can
> > > > > just make it 3.
> > > > > I need set the value of IPPDEXPCR resgiters from ftm_alarm0
> > > > > device node(fsl,rcpm-wakeup =3D <&rcpm 0x0 0x20000000>;
> > > > > 0x0 is a value for IPPDEXPCR0, 0x20000000 is a value for
> > IPPDEXPCR1).
> > > > > But because of the hardware issue on LS1021A, I need store the
> > > > > value of IPPDEXPCR registers to an alt address. So I defining an
> > > > > offset to scfg registers, then RCPM driver get an abosolute
> > > > > address from offset, RCPM driver write the value of IPPDEXPCR
> > > > > registers to these abosolute addresses(backup the value of
> > > > > IPPDEXPCR
> > registers).
> > > >
> > > > I understand what you are trying to do.  The problem is that the
> > > > new fsl,ippdexpcr-alt-addr property contains a phandle and an offse=
t.
> > > > The size of it shouldn't be related to #fsl,rcpm-wakeup-cells.
> > > You maybe like this: fsl,ippdexpcr-alt-addr =3D <&scfg 0x51c>;/*
> > > SCFG_SPARECR8 */
> >
> > No.  The #address-cell for the soc/ is 2, so the offset to scfg should
> > be 0x0 0x51c.  The total size should be 3, but it shouldn't be coming
> > from #fsl,rcpm-wakeup-cells like you mentioned in the binding.
> Oh, I got it. You want that fsl,ippdexpcr-alt-add is relative with #addre=
ss-cells
> instead of #fsl,rcpm-wakeup-cells.

Yes.

Regards,
Leo
> >
> > > >
> > > > > >
> > > > > > > +   The first entry must be a link to the SCFG device node.
> > > > > > > +   The non-first entry must be offset of registers of SCFG.
> > > > > > >
> > > > > > >  Example:
> > > > > > >  The RCPM node for T4240:
> > > > > > > @@ -43,6 +48,15 @@ The RCPM node for T4240:
> > > > > > >  		#fsl,rcpm-wakeup-cells =3D <2>;
> > > > > > >  	};
> > > > > > >
> > > > > > > +The RCPM node for LS1021A:
> > > > > > > +	rcpm: rcpm@1ee2140 {
> > > > > > > +		compatible =3D "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-
> > > 2.1+";
> > > > > > > +		reg =3D <0x0 0x1ee2140 0x0 0x8>;
> > > > > > > +		#fsl,rcpm-wakeup-cells =3D <2>;
> > > > > > > +		fsl,ippdexpcr-alt-addr =3D <&scfg 0x0 0x51c>; /*
> > > > > > > SCFG_SPARECR8 */
> > > > > > > +	};
> > > > > > > +
> > > > > > > +
> > > > > > >  * Freescale RCPM Wakeup Source Device Tree Bindings
> > > > > > >  -------------------------------------------
> > > > > > >  Required fsl,rcpm-wakeup property should be added to a
> > > > > > > device node if the device
> > > > > > > --
> > > > > > > 2.17.1