Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the
 document with LED
To:     Jacek Anaszewski <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
CC:     <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>
References: <20190925174616.3714-1-dmurphy@ti.com>
 <20190925174616.3714-9-dmurphy@ti.com>
 <e4916f0c-c8e7-924f-e944-4c5388dc0ef8@gmail.com>
From:   Dan Murphy <dmurphy@ti.com>
Message-ID: <609da7f3-9c6d-ec29-7c5f-38fa9fe01982@ti.com>
Date:   Thu, 26 Sep 2019 07:00:06 -0500
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
 Thunderbird/60.8.0
MIME-Version: 1.0
In-Reply-To: <e4916f0c-c8e7-924f-e944-4c5388dc0ef8@gmail.com>
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Transfer-Encoding: 7bit
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Jacek

On 9/25/19 4:31 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:
>> Update the document to be consistent in case when using LED.
> s/LED/"LED"/.

ACK


>
>> This should be capital throughout the document.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>   Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> index 1b66a413fb9d..bfe2805c5534 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> @@ -1,4 +1,4 @@
>> -Binding for TI/National Semiconductor LP55xx Led Drivers
>> +Binding for TI/National Semiconductor LP55xx LED Drivers
>>   
>>   Required properties:
>>   - compatible: one of
>> @@ -12,8 +12,8 @@ Required properties:
>>   - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
>>   
>>   Each child has own specific current settings
>> -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
>> -- max-cur: Maximun current at each led channel.
>> +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
>> +- max-cur: Maximun current at each LED channel.
>>   
>>   Optional properties:
>>   - enable-gpio: GPIO attached to the chip's enable pin
>>