Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750960AbWACKE7 (ORCPT ); Tue, 3 Jan 2006 05:04:59 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751075AbWACKE7 (ORCPT ); Tue, 3 Jan 2006 05:04:59 -0500 Received: from vvv.conterra.de ([212.124.44.162]:45992 "EHLO conterra.de") by vger.kernel.org with ESMTP id S1750958AbWACKE6 (ORCPT ); Tue, 3 Jan 2006 05:04:58 -0500 Message-ID: <43BA4C3D.4060206@conterra.de> Date: Tue, 03 Jan 2006 11:04:45 +0100 From: =?ISO-8859-1?Q?Dieter_St=FCken?= MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: Re: X86_64 + VIA + 4g problems References: <43B90A04.2090403@conterra.de> In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25485 Lines: 517 Andi Kleen wrote: > Can you please post the full boot log? > ... > When you not compile in the SKGE network driver does everything else work? > skge supports 64bit DMA, so it shouldn't use any IOMMU. But I'm somewhat > suspicious of the >4GB support in the VIA chipset. We had problems with > that before. It's possible that it's just not supported in the hardware > or that the BIOS sets up the MTRRs wrong. sorry for the delay, we are a few hors off here... here comes a more complete dmsg. Its a bit long, as its a large LVM system with 7 SATA disks attached. There are lots of messages about USB stuff, but I actually don't use any USB. But indeed I dicovered some mtrr message missed in the snipplet before. Unfortunately this is a production server, so I can't reboot and play with any time. But may be this night, in about 12h, I can perform further tests. Let me know, what kind of tests I may perform with all the SATA devices. I have a PDC-20378 and a VIA-VT6420 on board and a PDC-20318 on a PCI slot. Do those have any problems with 64-bit? For testing I would prefer to use them R/only. Would a parallel dummy tar to /dev/zero be meaningful?. Dieter. ----------- Bootdata ok (command line is root=/dev/sda1 log_buf_len=32k video=matroxfb:vesa:0x1B8 s) Linux version 2.6.15-rc7 (root@Rescue) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #9 Sun Jan 1 19:54:26 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff30000 (usable) BIOS-e820: 00000000bff30000 - 00000000bff40000 (ACPI data) BIOS-e820: 00000000bff40000 - 00000000bfff0000 (ACPI NVS) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa850 ACPI: XSDT (v001 A M I OEMXSDT 0x06000517 MSFT 0x00000097) @ 0x00000000bff30100 ACPI: FADT (v003 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x00000000bff30290 ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x00000000bff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x00000000bff40040 ACPI: DSDT (v001 SK8V_ SK8V_033 0x00000033 MSFT 0x0100000d) @ 0x0000000000000000 On node 0 totalpages: 1029568 DMA zone: 3160 pages, LIFO batch:0 DMA32 zone: 767848 pages, LIFO batch:31 Normal zone: 258560 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 Looks like a VIA chipset. Disabling IOMMU. Overwrite with "iommu=allowed" ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c4000000 (gap: c0000000:3ff80000) Built 1 zonelists Kernel command line: root=/dev/sda1 log_buf_len=32k video=matroxfb:vesa:0x1B8 s Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2002.656 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Placing software IO TLB between 0x5c39000 - 0x9c39000 Memory: 4043548k/5242880k available (1809k kernel code, 148908k reserved, 770k data, 160k init) Calibrating delay using timer specific routine.. 4014.56 BogoMIPS (lpj=8029129) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) mtrr: v2.0 (20020519) CPU: AMD Opteron(tm) Processor 146 stepping 0a tbxface-0109 [02] load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................................................... Table [DSDT](id 0005) - 538 Objects with 45 Devices 147 Methods 25 Regions ACPI Namespace successfully loaded at root ffffffff803b8dc0 evxfevnt-0091 [03] enable : Transition to ACPI mode successful Using local APIC timer interrupts. Detected 12.516 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 evgpeblk-0988 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-0996 [06] ev_create_gpe_block : Found 7 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.................................................................................................................................. Initialized 24/25 Regions 44/44 Fields 47/47 Buffers 15/16 Packages (547 nodes) Executing all Device _STA and_INI methods:................................................. 49 Devices found containing: 49 _STA, 0 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xf4000000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fbb00000-fcefffff PREFETCH window: efa00000-f39fffff acpi_bus-0201 [01] bus_set_power : Device is not power manageable PCI: Setting latency timer of device 0000:00:01.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1136141830.556:1): initialized Total HugeTLB memory allocated, 0 Initializing Cryptographic API io scheduler noop registered 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030 0000:00:10.0: Performing full reset 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030 0000:00:10.1: Performing full reset 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x8030 0000:00:10.2: Performing full reset 0000:00:10.3: uhci_check_and_reset_hc: legsup = 0x8030 0000:00:10.3: Performing full reset GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 matroxfb: Matrox G400 (AGP) detected PInS memtype = 0 mtrr: type mismatch for f0000000,1000000 old: write-back new: write-combining matroxfb: MTRR's turned on matroxfb: 1024x768x24bpp (virtual: 1024x5461) matroxfb: framebuffer at 0xF0000000, mapped to 0xffffc20000080000, size 16777216 Console: switching to colour frame buffer device 128x48 fb0: MATROX frame buffer device matroxfb_crtc2: secondary head of fb0 was registered as fb1 Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 acpi_bus-0201 [01] bus_set_power : Device is not power manageable GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... Probing IDE interface ide1... hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered input: AT Translated Set 2 keyboard as /class/input/input0 ACPI wakeup devices: PCI0 PS2K PS2M UAR2 UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 160k freed SCSI subsystem initialized libata version 1.20 loaded. sata_promise 0000:00:08.0: version 1.03 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 ata1: SATA max UDMA/133 cmd 0xFFFFC20000004200 ctl 0xFFFFC20000004238 bmdma 0x0 irq 18 ata2: SATA max UDMA/133 cmd 0xFFFFC20000004280 ctl 0xFFFFC200000042B8 bmdma 0x0 irq 18 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f ata1: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:3c01 87:4763 88:407f ata2: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise isa bounce pool size: 16 pages Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sda: drive cache: write back SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: HDS725050KLA360 Rev: K2AO Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16 ata3: SATA max UDMA/133 cmd 0xFFFFC20000006200 ctl 0xFFFFC20000006238 bmdma 0x0 irq 16 ata4: SATA max UDMA/133 cmd 0xFFFFC20000006280 ctl 0xFFFFC200000062B8 bmdma 0x0 irq 16 ata5: SATA max UDMA/133 cmd 0xFFFFC20000006300 ctl 0xFFFFC20000006338 bmdma 0x0 irq 16 ata6: SATA max UDMA/133 cmd 0xFFFFC20000006380 ctl 0xFFFFC200000063B8 bmdma 0x0 irq 16 ata3: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata3: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 ata3: dev 0 configured for UDMA/100 scsi2 : sata_promise ata4: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata4: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 ata4: dev 0 configured for UDMA/100 scsi3 : sata_promise ata5: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3e02 87:4023 88:203f ata5: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 ata5: dev 0 configured for UDMA/100 scsi4 : sata_promise ata6: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3e02 87:4023 88:203f ata6: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 ata6: dev 0 configured for UDMA/100 scsi5 : sata_promise Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sd 2:0:0:0: Attached scsi disk sdc Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sd 3:0:0:0: Attached scsi disk sdd Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sde: drive cache: write back SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sde: drive cache: write back sde: sde1 sd 4:0:0:0: Attached scsi disk sde Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdf: drive cache: write back SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdf: drive cache: write back sdf: sdf1 sd 5:0:0:0: Attached scsi disk sdf sata_via 0000:00:0f.0: version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 1 sata_via 0000:00:0f.0: routed to hard irq line 1 ata7: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 17 ata8: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 17 ata7: dev 0 cfg 49:2f00 82:74eb 83:7feb 84:4123 85:74e9 86:3c03 87:4123 88:407f ata7: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 ata7: dev 0 configured for UDMA/133 scsi6 : sata_via ata8: dev 0 cfg 49:2f00 82:74eb 83:7feb 84:4123 85:74e9 86:3c03 87:4123 88:407f ata8: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 ata8: dev 0 configured for UDMA/133 scsi7 : sata_via Vendor: ATA Model: HDS724040KLSA80 Rev: KFAO Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sdg: drive cache: write back SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sdg: drive cache: write back sdg: sdg1 sd 6:0:0:0: Attached scsi disk sdg Vendor: ATA Model: HDS724040KLSA80 Rev: KFAO Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdh: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sdh: drive cache: write back SCSI device sdh: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sdh: drive cache: write back sdh: sdh1 sd 7:0:0:0: Attached scsi disk sdh GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 19 eth0: 3Com Gigabit LOM (3C940) PrefPort:A RlmtMode:Check Link State kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new driver usbfs usbcore: registered new driver hub ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 acpi_bus-0201 [01] bus_set_power : Device is not power manageable GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 4 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: reset hcs_params 0x4208 dbg=0 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024 ehci_hcd 0000:00:10.4: capability 0001 at 68 ehci_hcd 0000:00:10.4: MWI active drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 20, io mem 0xfdf00000 ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:10.4: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.15-rc7 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 USB Universal Host Controller Interface driver v2.3 acpi_bus-0201 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 4 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: detected 2 ports uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.0: Performing full reset drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b400 uhci_hcd 0000:00:10.0: supports USB remote wakeup usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.15-rc7 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' uhci_hcd 0000:00:10.0: port 1 portsc 018a,00 hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s acpi_bus-0201 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 4 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: detected 2 ports uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.1: Performing full reset drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 20, io base 0x0000b800 uhci_hcd 0000:00:10.1: supports USB remote wakeup usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.15-rc7 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 uhci_hcd 0000:00:10.0: port 2 portsc 008a,00 hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s drivers/usb/core/inode.c: creating file '001' acpi_bus-0201 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 4 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: detected 2 ports uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.2: Performing full reset drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c000 uhci_hcd 0000:00:10.2: supports USB remote wakeup usb usb4: default language 0x0409 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.15-rc7 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: hotplug usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: hotplug hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.1: port 1 portsc 018a,00 hub 3-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s drivers/usb/core/inode.c: creating file '001' acpi_bus-0201 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 4 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: detected 2 ports uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.3: Performing full reset drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 20, io base 0x0000c400 uhci_hcd 0000:00:10.3: supports USB remote wakeup usb usb5: default language 0x0409 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.15-rc7 uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 usb usb5: hotplug usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: hotplug hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good drivers/usb/core/inode.c: creating file '001' hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 uhci_hcd 0000:00:10.1: port 2 portsc 018a,00 hub 3-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.2: port 1 portsc 008a,00 hub 4-0:1.0: port 1, status 0100, change 0003, 12 Mb/s hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 uhci_hcd 0000:00:10.2: port 2 portsc 018a,00 hub 4-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.3: port 1 portsc 008a,00 hub 5-0:1.0: port 1, status 0100, change 0003, 12 Mb/s hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 uhci_hcd 0000:00:10.3: port 2 portsc 018a,00 hub 5-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:10.0: suspend_rh (auto-stop) uhci_hcd 0000:00:10.1: suspend_rh (auto-stop) uhci_hcd 0000:00:10.2: suspend_rh (auto-stop) uhci_hcd 0000:00:10.3: suspend_rh (auto-stop) usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver NET: Registered protocol family 1 EXT3 FS on sda1, internal journal - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/