Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   k.konieczny@partner.samsung.com
To:     k.konieczny@partner.samsung.com
Cc:     Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        MyungJoo Ham <myungjoo.ham@samsung.com>,
        Kyungmin Park <kyungmin.park@samsung.com>,
        Kukjin Kim <kgene@kernel.org>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] devfreq: exynos-bus: workaround dev_pm_opp_set_rate()
 errors on Exynos5422/5800 SoCs
Date:   Tue,  8 Oct 2019 15:49:23 +0200
Message-Id: <20191008134923.30123-1-k.konieczny@partner.samsung.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <CGME20191008134950eucas1p15cfef5800efc10d5b18ec5eb37dde60b@eucas1p1.samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Commit 4294a779bd8d ("PM / devfreq: exynos-bus: Convert to use
dev_pm_opp_set_rate()") introduced errors:
exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
...
exynos-bus soc:bus_wcore: dev_pm_opp_set_rate: failed to find current OPP for freq 532000000 (-34)
exynos-bus soc:bus_noc: dev_pm_opp_set_rate: failed to find current OPP for freq 111000000 (-34)
exynos-bus soc:bus_fsys_apb: dev_pm_opp_set_rate: failed to find current OPP for freq 222000000 (-34)

They are caused by incorrect PLL assigned to clock source, which results
in clock rate outside of OPP range. Add workaround for this in
exynos_bus_parse_of() by adjusting clock rate to those present in OPP.

Fixes: 4294a779bd8d ("PM / devfreq: exynos-bus: Convert to use dev_pm_opp_set_rate()")
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
---
 drivers/devfreq/exynos-bus.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index c832673273a2..37bd34d5625b 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -243,7 +243,7 @@ static int exynos_bus_parse_of(struct device_node *np,
 {
 	struct device *dev = bus->dev;
 	struct dev_pm_opp *opp;
-	unsigned long rate;
+	unsigned long rate, opp_rate;
 	int ret;
 
 	/* Get the clock to provide each bus with source clock */
@@ -267,13 +267,21 @@ static int exynos_bus_parse_of(struct device_node *np,
 	}
 
 	rate = clk_get_rate(bus->clk);
-
-	opp = devfreq_recommended_opp(dev, &rate, 0);
+	opp_rate = rate;
+	opp = devfreq_recommended_opp(dev, &opp_rate, 0);
 	if (IS_ERR(opp)) {
 		dev_err(dev, "failed to find dev_pm_opp\n");
 		ret = PTR_ERR(opp);
 		goto err_opp;
 	}
+	/*
+	 * FIXME: U-boot leaves clock source at incorrect PLL, this results
+	 * in clock rate outside defined OPP rate. Work around this bug by
+	 * setting clock rate to recommended one.
+	 */
+	if (rate > opp_rate)
+		clk_set_rate(bus->clk, opp_rate);
+
 	bus->curr_freq = dev_pm_opp_get_freq(opp);
 	dev_pm_opp_put(opp);
 
-- 
2.23.0