Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 11 Oct 2001 12:52:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 11 Oct 2001 12:52:32 -0400 Received: from radium.jvb.tudelft.nl ([130.161.76.91]:11780 "HELO radium.jvb.tudelft.nl") by vger.kernel.org with SMTP id ; Thu, 11 Oct 2001 12:52:11 -0400 From: "Robbert Kouprie" To: "'John Gluck'" Cc: Subject: RE: eepro100.c bug on 10Mbit half duplex (kernels 2.4.5 / 2.4.10 / 2.4.11pre6 / 2.4.11 / 2.4.10ac11) Date: Thu, 11 Oct 2001 18:52:49 +0200 Message-ID: <002601c15275$2945b510$020da8c0@nitemare> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2627 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal In-Reply-To: <3BC5C866.1337F5DF@home.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, My testcase was indeed one large file. I did not test lots of small files. It would always lockup after said amount of traffic, but only in 10 Mbit half duplex mode. Also, I have the 82557, not the 82558 chip. The problem looks a lot like what should be fixed in this changelog line from 2.4.9-ac13: - Work around eepro100 bug with some chip (Arjan van de Ven) versions on 10Mbit half duplex Only 2.4.10ac11 still had the problem... - Robbert > -----Original Message----- > From: john@femail22.sdc1.sfba.home.com > [mailto:john@femail22.sdc1.sfba.home.com] On Behalf Of John Gluck > Sent: donderdag 11 oktober 2001 18:27 > To: Robbert Kouprie > Cc: linux-kernel@vger.kernel.org > Subject: Re: eepro100.c bug on 10Mbit half duplex (kernels > 2.4.5 / 2.4.10 / 2.4.11pre6 / 2.4.11 / 2.4.10ac11) > > > Hi > > I haven't noticed this problem on my system... > > I have an 82558 that uses this driver on a Tyan S1836DLUAN > motherboard. > I have Dual PIIIs and the system is multi homed. I have a 2nd > interface that > uses the NE2000 PCI driver. > > The system is my workstation but also acts as an internet > gateway (via cable > modem) and firewall for 2 other computers. My workstation is > on 24/7 and has > never hungup. > > I am currently using 2.4.10 for the kernel but I've used most > kenels since > the 2.4.0testX days. > > In your tests, is the 80 - 130 megs a single file or is it an > aggregate. In > my use I far exceed the amount of data but it's web surfing > so the files are > much smaller the what you mention. > > John > > Robbert Kouprie wrote: > > > Hi all, > > > > I can confirm that the known bug in the Intel EtherExpress Pro/100 > > adapter is still not worked around in recent kernels. The bug only > > manifests itself when the card is operating on 10 Mbit half > duplex. On > > 100 Mbit there are no problems. The problem is that after the device > > received certain amount of traffic (between 80 and 130 Mb > in my tests) > > the device will lockup on new connections. Processes start > to hang after > > this and logging in is impossible. The only solution is to reset the > > interface (using a previously logged in root session) and reboot the > > system. > > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/